Integra DRX-5.4 features 7 HDMI 2.1 inputs with 8K support. It has 2 outputs: 1 Main and 1 Sub/Zone2.
- 8K/60Hz and 4K/120Hz Passthrough: All inputs pass up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit video signal.
- 8K Upscaling: Integra DRX-5.4 can upscale from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz from HDMI and analog sources.
- Analog To HDMI Upconversion: The a/v receiver supports video upconversion, so you can connect your analog Component and Composite video sources and Integra DRX-5.4 will output them via HDMI. This means that you will need only one HDMI cable to connect to your TV.
- BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35%.
- HDCP 2.3 Copy Protection: All inputs and outputs are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
- Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience.
- 3D Ready: Integra DRX-5.4 is able to pass 3D video through HDMI.
HDR (High Dynamic Range)
Integra DRX-5.4 supports HDR (high dynamic range) video formats such as HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma via HDMI ports. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.
Enhanced Audio Return Channel (eARC)
Audio Return Channel (ARC) feature allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.
Gaming Features
Integra DRX-5.4 supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.
VIDEO FEATURES |
HDR10 | |
HDR10+ | |
Dynamic HDR | |
BT.2020 color space | |
Dolby Vision | |
HLG (Hybrid Log Gamma) | |
HDMI Version | 2.1 |
HDBaseT Compatible | |
Enhanced Audio Return Channel (eARC) | |
HDCP Version | 2.3 |
QMS (Quick Media Switching) | |
ALLM (Auto Low Latency Mode) | |
VRR (Variable Refresh Rate) | |
QFT (Quick Frame transport) | |
DSC (Display Stream Compression) | |
3-D Ready | |
Video Signal Passthrough | up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit |
Video Signal Upscaling | from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz |