Onkyo TX-NR757 vs Onkyo TX-NR747

Here we are comparing Onkyo TX-NR757 to Onkyo TX-NR747 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 7 channel and equally powerful amplifiers.

Onkyo TX-NR757	Onkyo TX-NR747
Onkyo TX-NR757 was introduced in 2016. It is equipped with 7 channel amplifier with 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.	Onkyo TX-NR747 was introduced in 2015. It is equipped with 7 channel amplifier with 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz video signal.

We evaluated Onkyo TX-NR757 and Onkyo TX-NR747 and gave them scores of 88 and 85 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Onkyo TX-NR757 over Onkyo TX-NR747.

	Onkyo TX-NR757	vs	Onkyo TX-NR747
VLSC (Vector Linear Shaping Circuitry)	Front L/R channels	vs
DTS Neural:X	after firmware update	vs	after firmware update
Higher Resolution Music Playback via USB	up to 192 kHz	vs	up to 96 kHz
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD	vs	FLAC, WAV, WMA Lossless, Apple Lossless, DSD, AAC
Dialog Normalization		vs
BT.2020 color space		vs
Dolby Vision		vs
Video Signal Upscaling	1080p to 4K	vs
Chromecast Built-In		vs
Front A/V Inputs	HDMI, Mini-Jack	vs	HDMI
Detachable Power Cord		vs
RS-232C Interface		vs
+12V Trigger Output	1 (MAIN, 100 mA)	vs	0
Remote (IR) Input/Output	1 / 0	vs	0 / 0
Tidal		vs
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)	180 W (0.9% THD)	vs	175 W (0.9% THD)
Higher DSD Sampling Rate via USB	2.8 MHz, 5.6 MHz	vs	2.8 MHz, 5.6 MHz
Wi-Fi Standard	IEEE 802.11 a/b/g/n	vs	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	vs	2.4 GHz
Newer Bluetooth Version	4․1 + LE	vs	2․1 + EDR

This section shows those features and specifications which are the reason to choose Onkyo TX-NR747 over Onkyo TX-NR757.

	Onkyo TX-NR757	vs	Onkyo TX-NR747
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD	vs	FLAC, WAV, Apple Lossless, WMA, WMA Lossless, Ogg, MP3, DSD, AAC, LPCM, Dolby TrueHD
InstaPrevue Input Source Prevue		vs
More RCA Line Outputs		vs	1
More Composite Video Inputs	2	vs	3
Whole House Mode		vs
ONKYO-RI System Control		vs
Pre-Pro/Learning Remote	/	vs	/
SiriusXM		vs
Independent Power Supply		vs	2
Higher DSD Sampling Rate via HDMI	2.8 MHz	vs	2.8 MHz, 5.6 MHz
Wider AM Frequency Range	530 kHz - 1710 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Onkyo TX-NR757	Onkyo TX-NR747
High Power Output	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification	Select™2 Plus	Select™2 Plus
Dolby Atmos	up to 5.1.2	up to 5.1.2
DTS:X	up to 5.1.2	up to 5.1.2 after firmware update
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	AccuEQ with AccuReflex™	AccuEQ Advance
HDR10
New HDCP Version	2.2 (3 inputs / 2 outputs)	2.2 (3 inputs / 2 outputs)
Analog To HDMI Upconversion	Component**, Composite	Component**, Composite
Wi-Fi
Bluetooth	SBC, AAC
Many HDMI Inputs	8 (1 front)	8 (1 front)
USB Input	1 (Rear)	1 (Rear)
Many RCA Line Inputs	7 (1 Front)	7
Phono Input
Composite Video Inputs	2	3
Component Video Inputs	2	2
Ethernet
Analog Tuner	FM/AM	FM/AM
Pandora
Spotify

WEAKNESSES	Onkyo TX-NR757	Onkyo TX-NR747
No Front Wide Channel Support
No Dolby Atmos Height Virtualization
No IMAX Enhanced
No Auro 3D with Auro-Matic Upmixer
No HDR10+
No eARC
No 8K Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (RGB/YCbCr4:4:4/YCbCr4:2:2, 24 bit)
Does not Work with Amazon Alexa
Few 8K Inputs
No RCA Pre-Outs	0.2	0.2
No Digital Radio

Onkyo TX-NR757	Onkyo TX-NR747
7 channel Amplifier: Onkyo TX-NR757 features 7 channel power amplifier. It is rated at 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Onkyo TX-NR747 features 7 channel power amplifier. It is rated at 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Dynamic Audio Amplification: Onkyo TX-NR757 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.
• WRAT (Wide Range Amp Technology): Onkyo TX-NR747 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.

THX™ Select™2 Plus certification

Onkyo TX-NR757 and Onkyo TX-NR747 are THX™ Select™2 Plus certified. This means that they are ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Onkyo TX-NR757	Onkyo TX-NR747
Channels	7.2	7.2
Power Output	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
VLSC (Vector Linear Shaping Circuitry)	Front L/R channels
Optimum Gain Volume Circuitry
THX™ Certification	Select™2 Plus	Select™2 Plus
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability
BTL (Bridged Transless or Bridging)

Onkyo TX-NR757's and Onkyo TX-NR747's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Onkyo TX-NR757: 5.2.2 with internal amplifier.
Onkyo TX-NR747: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Onkyo TX-NR757: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
Onkyo TX-NR747: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Onkyo TX-NR757: 5.2, 7.2 with internal amplifier.
Onkyo TX-NR747: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Onkyo TX-NR757 and Onkyo TX-NR747 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Onkyo TX-NR757 and Onkyo TX-NR747 support DTS:X.

• DTS Neural:X: Onkyo TX-NR757 supports DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

AUDIO DECODING	Onkyo TX-NR757	Onkyo TX-NR747
Dolby Atmos	up to 5.1.2	up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Surround EX	also known as Dolby Digital Surround EX	also known as Dolby Digital Surround EX
DTS:X	up to 5.1.2	up to 5.1.2 after firmware update
DTS Neural:X	after firmware update	after firmware update
DTS Virtual:X
DTS Neo	Neo:6 until firmware update	Neo:6 until firmware update
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Onkyo TX-NR757 and Onkyo TX-NR747 come with 8 HDMI inputs. It has 2 outputs which work parallelly and output the same signal.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K/60p (RGB/YCbCr4:4:4) video signal.
• 4K Upscaling on Onkyo TX-NR757: It can upscale 1080p to 4K from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on Onkyo TX-NR757 only).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Onkyo TX-NR757 supports HDR10 and Dolby Vision.

Onkyo TX-NR747 supports HDR10 High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

VIDEO FEATURES	Onkyo TX-NR757	Onkyo TX-NR747
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2 (3 inputs / 2 outputs)	2.2 (3 inputs / 2 outputs)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (RGB/YCbCr4:4:4/YCbCr4:2:2, 24 bit)
Video Signal Upscaling	1080p to 4K

TERMINALS	Onkyo TX-NR757	Onkyo TX-NR747
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	2 (simultaneous)	2 (simultaneous)
8K Inputs
USB Input	1 (Rear)	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	1	1
RCA Line Inputs	7 (1 Front)	7
RCA Line Outputs		1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	0.2	0.2
XLR Pre-outs
Composite Video Inputs	2	3
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs

GENERAL	Onkyo TX-NR757	Onkyo TX-NR747
Brand	Onkyo	Onkyo
Model	TX-NR757	TX-NR747
Type	A/V Receiver	A/V Receiver
Country	North America	USA
Release Year	2016	2015
Predecessor	Onkyo TX-NR747	Onkyo TX-NR737
Successor	Onkyo TX-NR777	Onkyo TX-NR757

AMPLIFIER	Onkyo TX-NR757	Onkyo TX-NR747
Channels	7.2	7.2
Power Output	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Dynamic Audio Amplification
Non-Phase Shift Amplifier
WRAT (Wide Range Amplifier Technology)
VLSC (Vector Linear Shaping Circuitry)	Front L/R channels
Optimum Gain Volume Circuitry
THX™ Certification	Select™2 Plus	Select™2 Plus
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Onkyo TX-NR757	Onkyo TX-NR747
Digital Signal Processing (DSP) Engine	32-bit Digital Signal Processing Enginess	Dual 32-bit DSP for Powerful Advanced Processing
DAC	AKM AK4458 (8 Channels x 1)	Asahi Kasei AK4458
DAC Specs	384 kHz/32 Bit	384 kHz/32 Bit
Maximum Channel Processing	7.1	7.1
Air Studios Monitor Certification
Dolby Atmos	up to 5.1.2	up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX	also known as Dolby Digital Surround EX	also known as Dolby Digital Surround EX
DTS:X	up to 5.1.2	up to 5.1.2 after firmware update
DTS Neural:X	after firmware update	after firmware update
DTS Virtual:X
DTS Neo	Neo:6 until firmware update	Neo:6 until firmware update
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD	FLAC, WAV, Apple Lossless, WMA, WMA Lossless, Ogg, MP3, DSD, AAC, LPCM, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 96 kHz
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD	FLAC, WAV, WMA Lossless, Apple Lossless, DSD, AAC
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment		DTS:X only
Dialog normalization
Dialogue Lift
Tone Control	Front L/R Channels	Front L/R Channels
Compressed Music Enhancer	Advanced Music Optimizer (bluetooth included)	Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost		for Deep Bass and Clear Mid-Range
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Virtual Speakers	T-D (Theater-Dimensional)	T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Onkyo TX-NR757	Onkyo TX-NR747
Auto Speaker Calibration System with Mic.	AccuEQ with AccuReflex™	AccuEQ Advance

VIDEO FEATURES	Onkyo TX-NR757	Onkyo TX-NR747
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2 (3 inputs / 2 outputs)	2.2 (3 inputs / 2 outputs)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (RGB/YCbCr4:4:4/YCbCr4:2:2, 24 bit)
Video Signal Upscaling	1080p to 4K
Analog To HDMI Upconversion	Component**, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	480i/576i	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Onkyo TX-NR757	Onkyo TX-NR747
Wi-Fi
Bluetooth	SBC, AAC
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS
DTS Play-Fi
MHL Input
DLNA 1.5
AirPlay	AirPlay	AirPlay
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Onkyo TX-NR757	Onkyo TX-NR747
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	2 (simultaneous)	2 (simultaneous)
8K Inputs
USB Input	1 (Rear)	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	1	1
RCA Line Inputs	7 (1 Front)	7
RCA Line Outputs		1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	0.2	0.2
XLR Pre-outs
Composite Video Inputs	2	3
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, Mini-Jack	HDMI
Speaker A/B
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
uport

ZONES	Onkyo TX-NR757	Onkyo TX-NR747
Number of Zones	2	2
Powered Zones	2 (and Zone 2 A/B)	2
Zone 2 Outs	RCA Line Out	RCA Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	1 (MAIN, 100 mA)	0
Remote (IR) Input/Output	1 / 0	0 / 0

MISCELLANEOUS	Onkyo TX-NR757	Onkyo TX-NR747
On-Screen Display	Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up	Graphical Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up
GUI Languages	7
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote	/	/
On Screen Remote Programming
Bi-directional Remote Setup via GUI
Smart Grid-Ready

RADIO	Onkyo TX-NR757	Onkyo TX-NR747
Analog Tuner	FM/AM	FM/AM
Presets	40	40
Digital Radio
Internet Radio	TuneIn	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Onkyo TX-NR757	Onkyo TX-NR747
Solid Aluminum Front
Speaker Terminals	9	9
Large Speaker Terminals	9	9
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
Gold plated RCA terminals

POWER	Onkyo TX-NR757	Onkyo TX-NR747
Power Supply	AC 120 V, 60 Hz	AC 120 V, 60 Hz
Independent Power Supply		2
H.C.P.S. (High Current Power Supply)	Massive High Power Transformer	Massive High Power Transformer
Toroidal Transformer
Power Consumption	600 W	6.9 A
No Sound Power	80 W	75 W
Standby Power	0.1 W	0.1 W
Capacitor Bank		10,000 µF
ECO Mode / Hybrid Standby Function

PHYSICAL	Onkyo TX-NR757	Onkyo TX-NR747
Dimensions (W x H x D)	435 mm x 173.5 mm x 378 mm 17-1/8" x 6-13/16" x 14-7/8"	435 mm x 175 mm x 379 mm 17-1/8" x 6-7/8" x 14-15/16"
Weight	10.5 kg (23.1 lbs)	11.0 kg (24.3 lbs)

SPECIFICATIONS	Onkyo TX-NR757	Onkyo TX-NR747
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	110 W (0.08% THD)	110 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)	180 W (0.9% THD)	175 W (0.9% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)		185 W
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)		175 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)	250 W	250 W
Dynamic Power per Channel (4 Ω, Front)	220 W	220 W
Dynamic Power per Channel (8 Ω, Front)	130 W	130 W
THD	0.08% (20 Hz - 20 kHz, Half power)	0.08% (20 Hz - 20 kHz, Half power)
Damping Factor		60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ (1 kHz, 100 W/8 Ω)	200 mV/47 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ	3.5 mV/47 kΩ (Phono mm)
Maximum Lineout Level and Impedance		1.0 V/2.2 kΩ
Rated Headphone Jack Output Level and Impedance	330 Ω
Rated Headphone Power Output	85 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz 0.5%)	70 mV (MM, 1 kHz 0.5% Direct)
S/N Ratio (Line, IHF-A)	106 dB	106 dB
S/N Ratio (Phono MM, IHF-A)	80 dB	80 dB
Frequency Response (Analog In)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz, 5.6 MHz
DSD Sampling Rates via USB	2.8 MHz, 5.6 MHz	2.8 MHz, 5.6 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response		5 Hz - 100 MHz/+0 dB, -3 dB (Component)
Ethernet Standard	10BASE-T/100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz
Bluetooth Version	4․1 + LE	2․1 + EDR
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	5 V, 1 A	5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 107.9 MHz
AM Frequency	530 kHz - 1710 kHz	522/530 kHz - 1611/1710 kHz
Warranty	2 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted