Marantz SR5014 vs Onkyo TX-NR696

Here we are comparing Marantz SR5014 to Onkyo TX-NR696 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 7 channel amplifiers.

Marantz SR5014	Onkyo TX-NR696
Marantz SR5014 was introduced in 2019. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales up to 4K 24/25/30p 4:4:4 video signal.	Onkyo TX-NR696 was introduced in 2019. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Marantz SR5014 and Onkyo TX-NR696 and gave both of them the score of 88 out of 100. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Marantz SR5014 over Onkyo TX-NR696.

	Marantz SR5014	vs	Onkyo TX-NR696
Dolby Digital EX		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Enhanced Audio Return Channel (eARC)		vs
Analog To HDMI Upconversion	Component**, Composite	vs
isf Certified Calibration Control		vs
Works with Amazon Alexa		vs
More HDMI Inputs	8 (1 front)	vs	7 (1 front)
More Optical Inputs	2	vs	1
More Coaxial Inputs/Outputs	2	vs	1
More RCA Pre-Outs	7.2	vs	2.2 (shared with Zone 2/Zone B)
More Composite Video Inputs	2	vs
More Composite Video Outputs	1	vs
More Component Video Inputs	2	vs
More Component Video Outputs	1	vs
Front A/V Inputs	HDMI, USB	vs	HDMI, Mini-Jack
Speaker A/B	assignable	vs
RS-232C Interface		vs
+12V Trigger Output	1	vs	0
Napster		vs
Color-Coded Speaker Terminals		vs
Bigger Power Supply	650 W	vs	570 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	200 W (10% THD)	vs	175 W (10% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	180 W (1% THD)	vs	165 W (1% THD)
Longer Warranty	3 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Onkyo TX-NR696 over Marantz SR5014.

	Marantz SR5014	vs	Onkyo TX-NR696
THX™ Certification		vs	Select™ (previously known as Select2)
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
DSD via HDMI		vs	2-ch/Multi-ch Input
Jitter Reduction		vs	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi		vs
More HDMI Outputs	2 (simultaneous)	vs	2 (1 Main, 1 Sub/Zone2)
More RCA Line Inputs	4	vs	5 (1 Front)
Zone 2 Outs	Pre Out	vs	HDMI, RCA Line Out (shared with Zone B)
Higher S/N Ratio (Line, IHF-A)	100 dB	vs	106 dB
Higher S/N Ratio (Phono MM, IHF-A)	74 dB	vs	80 dB
Higher DSD Sampling Rate via USB	5.6 MHz, 2.8 MHz	vs	2.8 MHz, 5.6 MHz, 11.2 MHz
Newer Bluetooth Version	4․1	vs	4․2
Wider AM Frequency Range	522 kHz - 1611 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Marantz SR5014	Onkyo TX-NR696
Dolby Atmos	up to 5.1.2
Dolby Atmos Height Virtualization
DTS:X	up to 5.1.2
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT	AccuEQ with subwoofer EQ and AccuReflex™
HDR10
Dolby Vision
New HDCP Version	2.3	2.3
Wi-Fi
Bluetooth	SBC	SBC, AAC
Many HDMI Inputs	8 (1 front)	7 (1 front)
USB Input	1 (Front) for USB memory	1 (Rear)
Phono Input
RCA Pre-Outs	7.2	2.2 (shared with Zone 2/Zone B)
Ethernet
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Spotify
Tidal

WEAKNESSES	Marantz SR5014	Onkyo TX-NR696
No Front Wide Channel Support
No IMAX Enhanced
No Auro 3D with Auro-Matic Upmixer
No HDR10+
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Few 8K Inputs
No Digital Radio
No Pandora

Marantz SR5014	Onkyo TX-NR696
7 channel Amplifier: Marantz SR5014 features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Linear Class A/B Amplifier: Onkyo TX-NR696 features 7 channel power amplifier with Linear Class A/B design. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Current Feedback Topology: Marantz SR5014 features Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.
• HDAM (Hyper Dynamic Amplifier Module): Marantz SR5014 features exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.
• Dynamic Audio Amplification: Onkyo TX-NR696 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.
• WRAT (Wide Range Amp Technology): Onkyo TX-NR696 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.

THX™ Select™ (previously known as Select2) certification

Onkyo TX-NR696 is THX™ Select™ (previously known as Select2) certified. This means that it is for medium sized rooms, up to 2,000 cubic feet in size, with a 10-12 foot viewing distance from the screen.

AMPLIFIER	Marantz SR5014	Onkyo TX-NR696
Channels	7.2	7.2
Power Output	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable

Marantz SR5014's and Onkyo TX-NR696's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Marantz SR5014: 5.2.2 with internal amplifier.
Onkyo TX-NR696: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Marantz SR5014: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
Onkyo TX-NR696: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Marantz SR5014: 5.2, 7.2 with internal amplifier.
Onkyo TX-NR696: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Marantz SR5014 and Onkyo TX-NR696 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Both models support Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Marantz SR5014 and Onkyo TX-NR696 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Both models feature DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

AUDIO DECODING	Marantz SR5014	Onkyo TX-NR696
Dolby Atmos	up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	up to 5.1.2
DTS Neural:X
DTS Virtual:X		via future firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Marantz SR5014 comes with 8 HDMI inputs. It has 2 outputs which work parallelly and output the same signal.

Onkyo TX-NR696 comes with 7 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling: Both receivers can upscale up to 4K 24/25/30p 4:4:4 from HDMI sources. Marantz SR5014 can also upscale from analog sources.
• Analog To HDMI Upconversion: Marantz SR5014 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.3 Copy Protection: Both receivers are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Marantz SR5014 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

VIDEO FEATURES	Marantz SR5014	Onkyo TX-NR696
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 24/25/30p 4:4:4	1080p to 4K

TERMINALS	Marantz SR5014	Onkyo TX-NR696
HDMI Inputs	8 (1 front)	7 (1 front)
HDMI Outputs	2 (simultaneous)	2 (1 Main, 1 Sub/Zone2)
8K Inputs
USB Input	1 (Front) for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	5 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	7.2	2.2 (shared with Zone 2/Zone B)
XLR Pre-outs
Composite Video Inputs	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2
Component Video Outputs	1

GENERAL	Marantz SR5014	Onkyo TX-NR696
Brand	Marantz	Onkyo
Model	SR5014	TX-NR696
Type	A/V Receiver	A/V Receiver
Country	UK	Australia and Asia
Release Year	2019	2019
Predecessor	Marantz SR5013	Onkyo TX-NR686
Successor	Marantz SR5015	Onkyo TX-NR6100

AMPLIFIER	Marantz SR5014	Onkyo TX-NR696
Channels	7.2	7.2
Power Output	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design		Linear Class A/B
Current Feedback Topology
Discrete Amplification
HDAM
Dynamic Audio Amplification
Non-Phase Shift Amplifier
WRAT (Wide Range Amplifier Technology)
VLSC (Vector Linear Shaping Circuitry)		Front L/R channels
Optimum Gain Volume Circuitry
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability	assignable
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Marantz SR5014	Onkyo TX-NR696
Digital Signal Processing (DSP) Engine		32-bit Digital Signal Processing Engines
DAC	AKM AK4458	AKM AK4458
DAC Specs	192 kHz/32 Bit	384 kHz/32 Bit
Maximum Channel Processing	7.1	7.1
Air Studios Monitor Certification
Dolby Atmos	up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X	up to 5.1.2
DTS Neural:X
DTS Virtual:X		via future firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI		2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		Front L/R Channels
Compressed Music Enhancer	MDAX2	Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Marantz SR5014	Onkyo TX-NR696
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT	AccuEQ with subwoofer EQ and AccuReflex™
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Marantz SR5014	Onkyo TX-NR696
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 24/25/30p 4:4:4	1080p to 4K
Analog To HDMI Upconversion	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control

CONNECTIVITY	Marantz SR5014	Onkyo TX-NR696
Wi-Fi
Bluetooth	SBC	SBC, AAC
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
Domotz Pro Compatible
Remote Monitoring with ihiji
OvrC Compatible
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Marantz 2016 AVR Remote App for iOS and Android devices	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Marantz SR5014	Onkyo TX-NR696
HDMI Inputs	8 (1 front)	7 (1 front)
HDMI Outputs	2 (simultaneous)	2 (1 Main, 1 Sub/Zone2)
8K Inputs
USB Input	1 (Front) for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	5 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	7.2	2.2 (shared with Zone 2/Zone B)
XLR Pre-outs
Composite Video Inputs	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB	HDMI, Mini-Jack
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
Flasher In
Remote Control In/Out	1 / 1
uport

ZONES	Marantz SR5014	Onkyo TX-NR696
Number of Zones	2	2
Powered Zones	2	2
Zone 2 Outs	Pre Out	HDMI, RCA Line Out (shared with Zone B)
Whole House Mode
RS-232C Interface
+12V Trigger Output	1	0
Remote (IR) Input/Output		0 / 0

MISCELLANEOUS	Marantz SR5014	Onkyo TX-NR696
On-Screen Display	Advanced Graphic User Interface	Graphical Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up
GUI Languages	9	9
Web Control
IP Control
Display	port hole
Remote Controller	RC035SR
Pre-programmed / Learnable / LCD Display	/ /
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Smart Grid-Ready
Setup Assistant

RADIO	Marantz SR5014	Onkyo TX-NR696
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Presets		40
Digital Radio
Internet Radio	TuneIn	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Marantz SR5014	Onkyo TX-NR696
Front Panel	Metal
Solid Aluminum Front
Speaker Terminals	7	7
Large Speaker Terminals	7	7
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals

POWER	Marantz SR5014	Onkyo TX-NR696
Power Supply	AC 230 V, 50/60 Hz	AC 220-240 V, 50/60 Hz
Independent Power Supply
H.C.P.S. (High Current Power Supply)		Customized Transformer
Toroidal Transformer	(EI)
Power Consumption	650 W	570 W
No Sound Power	ECO On/Off: 45 W/75 W	65 W
Standby Power	0.2 W	0.15 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Marantz SR5014	Onkyo TX-NR696
Dimensions (W x H x D)	440 mm x 161 mm x 348 mm (with antenna: 440 mm x 231 mm x 348 mm) 17-3/8" x 6-3/8" x 13-3/4" (with antenna: 17-3/8" x 9-1/8" x 13-3/4")	435 mm x 173.5 mm x 379.5 mm 17-1/8" x 6-13/16" x 14-15/16"
Dimensions of Package (W x H x D)	519 mm x 242 mm x 428 mm	534 mm x 265 mm x 468 mm 21" x 10-7/16" x 18-7/16"
Weight	10.1 kg (22.2 lbs)	10.0 kg (22.0 lbs)
Weight of Package	12.3 kg	12.5 kg (27.6 lbs)

SPECIFICATIONS	Marantz SR5014	Onkyo TX-NR696
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	100 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	140 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	200 W (10% THD)	175 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	180 W (1% THD)	165 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)		240 W
Dynamic Power per Channel (4 Ω, Front)		210 W
Dynamic Power per Channel (8 Ω, Front)		120 W
THD		0.08% (20 Hz - 20 kHz, Half power)
Phono Distortion	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ (1 kHz, 100 W/8 Ω)
Input Sensitivity and Impedance (Phono MM)	2.5 mV	3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/470 Ω
Rated Headphone Power Output		80 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	100 dB	106 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	80 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
DSD Sampling Rates via HDMI		2.8 MHz
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz - 60 MHz, 0, -3 dB (Component) 5 Hz - 10 MHz, 0, -3 dB (Composite)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	4․1	4․2
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	Ver. 2.0, 5 V, 1 A
FM Frequency	87.5 MHz - 108.0 MHz	87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 2.8 µV (20.2 dBf)	Mono: 1.0 µV (11.2 dBf)
FM Effective Sensitivity	1.2 µV (12.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%
AM Frequency	522 kHz - 1611 kHz	522/530 kHz - 1611/1710 kHz
AM Effective Sensitivity	18 µV
Warranty	3 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted