Marantz SR5009 vs Onkyo TX-NR656

Here we are comparing Marantz SR5009 to Onkyo TX-NR656 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 7 channel amplifiers.

Marantz SR5009	Onkyo TX-NR656
Marantz SR5009 was introduced in 2014. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz and 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It , passes 4K/60Hz and upscales up to 4K 30/25/24p 4:4:4 video signal.	Onkyo TX-NR656 was introduced in 2016. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Marantz SR5009 and Onkyo TX-NR656 and gave them scores of 79 and 83 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Marantz SR5009 over Onkyo TX-NR656.

	Marantz SR5009	vs	Onkyo TX-NR656
Certified 4 Ω Performance		vs
Dolby Pro Logic	PLIIz	vs
Dolby Digital EX		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Component Video Maximum Resolution	1080p	vs	480i/576i
isf Certified Calibration Control		vs
More HDMI Outputs	2 (1 for MAIN, 1 for ZONE2)	vs	2 (simultaneous)
More Coaxial Inputs/Outputs	2	vs	1
Multi-Channel Input	7.1	vs
More RCA Pre-Outs	7.2	vs	0.2
More Composite Video Outputs	1	vs
More Component Video Outputs	1	vs
Front A/V Inputs	HDMI, USB	vs	HDMI, Mini-Jack
Speaker A/B	assignable	vs
Zone 2 Outs	Pre Out	vs	RCA Line Out
RS-232C Interface		vs
+12V Trigger Output	1	vs	0
Color-Coded Speaker Terminals		vs
Bigger Power Supply	650 W	vs	570 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	180 W (1% THD)	vs	160 W (1% THD)
Longer Warranty	3 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Onkyo TX-NR656 over Marantz SR5009.

	Marantz SR5009	vs	Onkyo TX-NR656
Higher DAC Specs	[]	vs	384 kHz/32 Bit
Dolby Atmos		vs	up to 5.1.2
Dolby Surround Upmixer		vs
DTS:X		vs	up to 5.1.2
DTS Neural:X		vs	after firmware update
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
DSD via HDMI		vs	2-ch/Multi-ch Input
Jitter Reduction		vs	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialog Control		vs
HDR10		vs
BT.2020 color space		vs
Dolby Vision		vs
Chromecast Built-In		vs
More RCA Line Inputs	4	vs	7 (1 Front)
Phono Input		vs
Tidal		vs
Deezer		vs
More Speaker Terminals	7	vs	9
More Large Speaker Terminals	7	vs	9
Higher S/N Ratio (Line, IHF-A)	100 dB	vs	106 dB
Higher DSD Sampling Rate via USB	2.8 MHz	vs	2.8 MHz, 5.6 MHz
Wi-Fi Standard	IEEE 802.11 b/g/n	vs	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	2.4 GHz	vs	5 GHz, 2.4 GHz
Newer Bluetooth Version	2․1 + EDR	vs	4․1 + LE
Wider AM Frequency Range	522 kHz - 1611 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Marantz SR5009	Onkyo TX-NR656
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT	AccuEQ with AccuReflex™
New HDCP Version	2.2	2.2 (3 inputs / 2 outputs)
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Wi-Fi
Bluetooth		SBC, AAC
Many HDMI Inputs	8 (1 front)	8 (1 front)
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
Composite Video Inputs	2	2
Component Video Inputs	2	2
Ethernet
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Spotify

WEAKNESSES	Marantz SR5009	Onkyo TX-NR656
No Front Wide Channel Support
No Dolby Atmos Height Virtualization
No IMAX Enhanced
No Auro 3D with Auro-Matic Upmixer
No HDR10+
No eARC
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Does not Work with Amazon Alexa
Few 8K Inputs
No Digital Radio
No Pandora

Marantz SR5009	Onkyo TX-NR656
7 channel Amplifier: Marantz SR5009 features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Onkyo TX-NR656 features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven).

• Current Feedback Topology: Marantz SR5009 features Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.
• HDAM (Hyper Dynamic Amplifier Module): Marantz SR5009 features exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.
• Dynamic Audio Amplification: Onkyo TX-NR656 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.

AMPLIFIER	Marantz SR5009	Onkyo TX-NR656
Channels	7.2	7.2
Power Output	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable

Marantz SR5009's and Onkyo TX-NR656's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Marantz SR5009: Not supported.
Onkyo TX-NR656: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Marantz SR5009: Not supported.
Onkyo TX-NR656: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Marantz SR5009: 5.2, 7.2 with internal amplifier.
Onkyo TX-NR656: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Onkyo TX-NR656 supports Dolby Atmos.

• Dolby Surround Upmixer: Onkyo TX-NR656 supports Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Onkyo TX-NR656 supports DTS:X.

• DTS Neural:X: Onkyo TX-NR656 features DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Onkyo TX-NR656 has DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

AUDIO DECODING	Marantz SR5009	Onkyo TX-NR656
Dolby Atmos		up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic	PLIIz
Dolby Digital EX
Surround EX
DTS:X		up to 5.1.2
DTS Neural:X		after firmware update
DTS Virtual:X
DTS Neo	Neo:6	Neo:6 until firmware update
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Marantz SR5009 comes with 8 HDMI inputs. It has 2 outputs - 1 for MAIN and 1 for ZONE2.

Onkyo TX-NR656 comes with 8 HDMI inputs. It has 2 outputs which work parallelly and output the same signal.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling: Both receivers can upscale up to 4K 30/25/24p 4:4:4 from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on Onkyo TX-NR656 only).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Marantz SR5009 does not support HDR.

Onkyo TX-NR656 supports HDR10 and Dolby Vision. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

VIDEO FEATURES	Marantz SR5009	Onkyo TX-NR656
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2 (3 inputs / 2 outputs)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 30/25/24p 4:4:4	1080p to 4K

TERMINALS	Marantz SR5009	Onkyo TX-NR656
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	2 (1 for MAIN, 1 for ZONE2)	2 (simultaneous)
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	7 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1
RCA Pre-Outs	7.2	0.2
XLR Pre-outs
Composite Video Inputs	2	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1

GENERAL	Marantz SR5009	Onkyo TX-NR656
Brand	Marantz	Onkyo
Model	SR5009	TX-NR656
Type	A/V Receiver	A/V Receiver
Country	UK	Australia
Release Year	2014	2016
Predecessor		Onkyo TX-NR646
Successor	Marantz SR5010	Onkyo TX-NR676E

AMPLIFIER	Marantz SR5009	Onkyo TX-NR656
Channels	7.2	7.2
Power Output	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Current Feedback Topology
Discrete Amplification
HDAM
Dynamic Audio Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		Front L/R channels
Optimum Gain Volume Circuitry
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability	assignable
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Marantz SR5009	Onkyo TX-NR656
Digital Signal Processing (DSP) Engine		32-bit Digital Signal Processing Enginess
DAC		AKM AK4458 (8 Channels x 1)
DAC Specs		384 kHz/32 Bit
Maximum Channel Processing	7.1	7.1
Air Studios Monitor Certification
Dolby Atmos		up to 5.1.2
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic	PLIIz
Dolby Digital EX
Surround EX
DTS:X		up to 5.1.2
DTS Neural:X		after firmware update
DTS Virtual:X
DTS Neo	Neo:6	Neo:6 until firmware update
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI		2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		Front L/R Channels
Compressed Music Enhancer	MDAX2	Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Marantz SR5009	Onkyo TX-NR656
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT	AccuEQ with AccuReflex™
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Marantz SR5009	Onkyo TX-NR656
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2 (3 inputs / 2 outputs)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 30/25/24p 4:4:4	1080p to 4K
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	1080p	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Marantz SR5009	Onkyo TX-NR656
Wi-Fi
Bluetooth		SBC, AAC
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
Domotz Pro Compatible
Remote Monitoring with ihiji
OvrC Compatible
AirPlay	AirPlay	AirPlay
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Marantz Remote App for iOS and Android devices	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Marantz SR5009	Onkyo TX-NR656
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	2 (1 for MAIN, 1 for ZONE2)	2 (simultaneous)
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	7 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1
RCA Pre-Outs	7.2	0.2
XLR Pre-outs
Composite Video Inputs	2	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB	HDMI, Mini-Jack
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
Flasher In
Remote Control In/Out	1 / 1
uport

ZONES	Marantz SR5009	Onkyo TX-NR656
Number of Zones	2	2
Powered Zones	2	2
Zone 2 Outs	Pre Out	RCA Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	1	0
Remote (IR) Input/Output		0 / 0

MISCELLANEOUS	Marantz SR5009	Onkyo TX-NR656
On-Screen Display	Advanced Graphic User Interface	Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up
GUI Languages	9	9
Web Control
IP Control
Display	port hole
Remote Controller	RC024SR
Pre-programmed / Learnable / LCD Display	/ /
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote		/
Smart Grid-Ready
Setup Assistant

RADIO	Marantz SR5009	Onkyo TX-NR656
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Presets		40
Digital Radio
Internet Radio		TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Marantz SR5009	Onkyo TX-NR656
Solid Aluminum Front
Speaker Terminals	7	9
Large Speaker Terminals	7	9
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals

POWER	Marantz SR5009	Onkyo TX-NR656
Power Supply	AC 230 V, 50/60 Hz	AC 220-240 V, 50/60 Hz
Independent Power Supply
H.C.P.S. (High Current Power Supply)		Massive High Power Transformer
Toroidal Transformer
Power Consumption	650 W	570 W
No Sound Power	ECO On/Off: 45 W/75 W	65 W
Standby Power	0.2 W	0.15 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Marantz SR5009	Onkyo TX-NR656
Dimensions (W x H x D)	440 mm x 161 mm x 346 mm (with antenna: 440 mm x 230 mm x 346 mm) 17-21/64" x 6-11/32" x 13-5/8" (with antenna up: 17-21/64" x 9-1/16" x 13-5/8")	435 mm x 173.5 mm x 378 mm 17-1/8" x 6-13/16" x 14-7/8"
Weight	10.3 kg (22 lbs 11 oz)	10.0 kg (22.0 lbs)

SPECIFICATIONS	Marantz SR5009	Onkyo TX-NR656
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	100 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	140 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)		175 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	180 W (1% THD)	160 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)		240 W
Dynamic Power per Channel (4 Ω, Front)		210 W
Dynamic Power per Channel (8 Ω, Front)		120 W
THD		0.08% (20 Hz - 20 kHz, Half power)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ (1 kHz, 100 W/8 Ω)
Input Sensitivity and Impedance (Phono MM)		3.5 mV/47 kΩ
Rated Headphone Jack Output Level and Impedance		330 Ω
Rated Headphone Power Output		90 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	100 dB	106 dB
S/N Ratio (Phono MM, IHF-A)		80 dB
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
DSD Sampling Rates via HDMI		2.8 MHz
DSD Sampling Rates via USB	2.8 MHz	2.8 MHz, 5.6 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz to 60 MHz, 0 dB/-3 dB (Component) 5 Hz to 10 MHz, 0 dB/-3 dB (Composite)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 b/g/n	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	2․1 + EDR	4․1 + LE
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	5 V, 1 A
FM Frequency	87.5 MHz - 108.0 MHz	87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 2.8 µV (20.2 dBf)
FM Effective Sensitivity	1.2 µV (12.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%
AM Frequency	522 kHz - 1611 kHz	522/530 kHz - 1611/1710 kHz
AM Effective Sensitivity	18 µV
Warranty	3 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted