Integra DRX-8.4 vs Yamaha RX-V6A

Here we are comparing Integra DRX-8.4 to Yamaha RX-V6A to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Integra DRX-8.4 has 11 channel and the Yamaha RX-V6A has 7 channel amplifiers.

Integra DRX-8.4

Yamaha RX-V6A

Integra DRX-8.4 was introduced in 2023 and represents a current flagship model of a manufacturer. It is equipped with 11 channel amplifier with 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 8K/60Hz and 4K/120Hz and upscales from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz video signal.

Yamaha RX-V6A was introduced in 2020. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz and upscales up to 4K 60p 4:4:4 video signal.

We evaluated Integra DRX-8.4 and Yamaha RX-V6A and gave them scores of 93 and 89 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Integra DRX-8.4 over Yamaha RX-V6A.

	Integra DRX-8.4	vs	Yamaha RX-V6A
More Channels	11.4	vs	7.2
Higher Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification	Select™ (previously known as Select2)	vs
Bi-amp capability	Front L/R and Center Channels	vs
Higher DAC Specs	768 kHz/32 Bit	vs	384 kHz/32 Bit
More Channel Processing	11.2	vs	7.1
DTS Express		vs
IMAX Enhanced		vs
Auro 3D with Auro-Matic Upmixer		vs
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM	vs	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	vs	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	vs	Apple Lossless, WAV, FLAC, AIFF, DSD
Independent Subwoofer Outputs	2 independent + 2 parallel	vs
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	vs	up to 4K 60p 4:4:4
Analog To HDMI Upconversion	Component**, Composite	vs
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi	via Integra Music Control App	vs
More HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	vs	1
More Optical Inputs	3	vs	1
More Coaxial Inputs/Outputs	2	vs	1
More RCA Line Inputs	4	vs	3
XLR Line Inputs	1	vs
More RCA Pre-Outs	11.4	vs	2.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers	vs
More Composite Video Inputs	2	vs
More Component Video Inputs	1	vs
Front A/V Inputs	HDMI	vs	USB
Detachable Power Cord		vs
More Zones	3	vs	2
More Powered Zones	2 and 3	vs	Zone 2
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	vs	RCA Preout
RS-232C Interface		vs
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)	vs	1
Remote (IR) Input/Output	2 / 1	vs	0 / 0
More Speaker Terminals	15	vs	9
More Large Speaker Terminals	15	vs	9
Gold plated RCA terminals		vs
Bigger Power Supply	1190 W	vs	360 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	260 W (10% THD)	vs	160 W (10% THD)
Longer Warranty	3 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Yamaha RX-V6A over Integra DRX-8.4.

	Integra DRX-8.4	vs	Yamaha RX-V6A
DTS Neo		vs	Neo:6
Higher Resolution Music Playback via USB	up to 192 kHz	vs	up to 192 kHz/32 Bit
Dialogue Lift		vs
More 8K Inputs	6	vs	7
Analog Tuner		vs	FM/AM
Napster		vs
Lower THD	0.08% (20 Hz - 20 kHz, half power)	vs	0.04% (AUDIO 3 etc. to Front, Pure Direct, 20 Hz - 20 kHz, 50 W, 8 Ω)
Higher S/N Ratio (Line, IHF-A)	107 dB	vs	110 dB
Higher S/N Ratio (Phono MM, IHF-A)	78 dB	vs	95 dB

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Integra DRX-8.4	Yamaha RX-V6A
Dolby Atmos
Dolby Atmos Height Virtualization
DTS:X
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Dirac Live™ Premium Licence	YPAO sound optimization (R.S.C.)
HDR10
HDR10+
Dolby Vision
HDMI Version	2.1	2.1
eARC
New HDCP Version	2.3	2.3
Auto Low Latency Mode Pass-through
VRR
QFT
8K Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4
Wi-Fi
Bluetooth	SBC, AAC, aptX, aptX HD	SBC, AAC
Works with Amazon Alexa
Google Assistant
Many HDMI Inputs	7 (1 front)	7
Many 8K Inputs	6	7
USB Input	1	USB memory, Portable Audio Player
Phono Input
RCA Pre-Outs	11.4	2.2
Ethernet
Spotify
Tidal

WEAKNESSES	Integra DRX-8.4	Yamaha RX-V6A
No Front Wide Channel Support
No Digital Radio
No Pandora

Integra DRX-8.4	Yamaha RX-V6A
11 channel All new symmetric Class AB Amplifier: Integra DRX-8.4 features 11 channel power amplifier with All new symmetric Class AB design. It is rated at 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Yamaha RX-V6A features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

THX™ Select™ (previously known as Select2) certification

Integra DRX-8.4 is THX™ Select™ (previously known as Select2) certified. This means that it is ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Integra DRX-8.4	Yamaha RX-V6A
Channels	11.4	7.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	Front L/R and Center Channels

Integra DRX-8.4's and Yamaha RX-V6A's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Integra DRX-8.4: 5.4.2, 5.4.4, 7.4.2, 7.4.4 with internal amplifier.
Yamaha RX-V6A: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Integra DRX-8.4: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.4.2, 5.4.4, 7.4.2, 7.4.4 with internal amplifier.
Yamaha RX-V6A: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Integra DRX-8.4: 5.4, 7.4 with internal amplifier.
Yamaha RX-V6A: 5.2, 7.2 with internal amplifier.
• Bi-Amp: Integra DRX-8.4 is able to bi-amp up to 3 and Yamaha RX-V6A is able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Integra DRX-8.4 and Yamaha RX-V6A support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Both models support Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Integra DRX-8.4 and Yamaha RX-V6A support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Integra DRX-8.4 supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Integra DRX-8.4 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Integra DRX-8.4	Yamaha RX-V6A
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Integra DRX-8.4 comes with 6 HDMI 2.1 inputs with 8K support and 1 inputs with 4K support. It has 3 outputs - 1 MAIN and 1 SUB and 1 ZONE 2.

Yamaha RX-V6A comes with 7 HDMI 2.1 inputs with 8K support. It has 1 output.

• 8K/60Hz and 4K/120Hz Passthrough on Integra DRX-8.4: 6 out of 7 inputs pass up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit and the rest of the inputs pass up to 4K 50/60Hz 4:4:4 video signal.
  8K/60Hz and 4K/120Hz Passthrough on Yamaha RX-V6A: All inputs pass up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.
• 8K Upscaling on Integra DRX-8.4: It can upscale from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz from HDMI and analog sources.
  4K Upscaling on Yamaha RX-V6A: It can upscale up to 4K 60p 4:4:4 from HDMI sources.
• Analog To HDMI Upconversion: Integra DRX-8.4 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.3 Copy Protection: Both receivers are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on both models).
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Integra DRX-8.4 and Yamaha RX-V6A support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Both receivers support Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Integra DRX-8.4	Yamaha RX-V6A
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	up to 4K 60p 4:4:4

TERMINALS	Integra DRX-8.4	Yamaha RX-V6A
HDMI Inputs	7 (1 front)	7
HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	1
8K Inputs	6	7
USB Input	1	USB memory, Portable Audio Player
USB DC Out Port
Optical Inputs	3	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	3
RCA Line Outputs
XLR Line Inputs	1
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.4	2.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers
Composite Video Inputs	2
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	1
Component Video Outputs

GENERAL	Integra DRX-8.4	Yamaha RX-V6A
Brand	Integra	Yamaha
Model	DRX-8.4	RX-V6A
Type	A/V Receiver	A/V Receiver
Country	Europe	Taiwan
Release Year	2023	2020
Predecessor	Integra DRX-7.3

AMPLIFIER	Integra DRX-8.4	Yamaha RX-V6A
Channels	11.4	7.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	All new symmetric Class AB
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	Front L/R and Center Channels

AUDIO FEATURES	Integra DRX-8.4	Yamaha RX-V6A
Surround:AI™
DAC	Two precision 32-bit ESS ES9026PRO Hyperstream II	Burr-Brown PCM5102A
DAC Specs	768 kHz/32 Bit	384 kHz/32 Bit
Maximum Channel Processing	11.2	7.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz/32 Bit
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	Apple Lossless, WAV, FLAC, AIFF, DSD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control	All Channels
Compressed Music Enhancer	Advanced Music Optimizer
High-resolution Music Enhancer
Adaptive DRC (Dynamic Range Control)
Initial Volume & Maximum Volume Setting
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Straight Decoding Mode
Pure Direct Mode
CINEMA DSP
DSP Programs		17
SILENT CINEMA / Virtual CINEMA DSP
Virtual Speakers	T-D (Theater-Dimensional)	including surround back
Independent Subwoofer Outputs	2 independent + 2 parallel

CALIBRATION	Integra DRX-8.4	Yamaha RX-V6A
Auto Speaker Calibration System with Mic.	Dirac Live™ Premium Licence	YPAO sound optimization (R.S.C.)
Calibration Microphone	Setup via Dirac PC/MAC app and optional USB mic (Advanced), OR free Integra mobile app and included wired mic (Basic)
YPAO Volume

VIDEO FEATURES	Integra DRX-8.4	Yamaha RX-V6A
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	up to 4K 60p 4:4:4
Analog To HDMI Upconversion	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Integra DRX-8.4	Yamaha RX-V6A
Wi-Fi
Bluetooth	SBC, AAC, aptX, aptX HD	SBC, AAC
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
DTS Play-Fi	via Integra Music Control App
MHL Input
MusicCast
Domotz Pro Compatible
OvrC Compatible
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Integra Remote Control App	(iPhone® / iPad® / Android™ phone / tablet)
InstaPrevue Input Source Prevue

TERMINALS	Integra DRX-8.4	Yamaha RX-V6A
HDMI Inputs	7 (1 front)	7
HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	1
8K Inputs	6	7
USB Input	1	USB memory, Portable Audio Player
USB DC Out Port
Optical Inputs	3	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	4	3
RCA Line Outputs
XLR Line Inputs	1
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.4	2.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers
Composite Video Inputs	2
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	1
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI	USB
Speaker A/B
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
dockport

ZONES	Integra DRX-8.4	Yamaha RX-V6A
Number of Zones	3	2
Powered Zones	2 and 3	Zone 2
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	RCA Preout
Zone 3 Outs	RCA Pre/Line Out
Zone B Video Output
Zone GUI
Whole House Mode
RS-232C Interface
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)	1
Remote (IR) Input/Output	2 / 1	0 / 0
Party Mode

MISCELLANEOUS	Integra DRX-8.4	Yamaha RX-V6A
On-Screen Display	High-definition GUI over HDMI	Graphical User Interface
GUI Languages	9
SCENE		SCENE (8 sets)
Web Control
IP Control
Control4 SDDP
PreAmp Mode

RADIO	Integra DRX-8.4	Yamaha RX-V6A
Analog Tuner		FM/AM
Presets	40	40
Digital Radio
Internet Radio	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Integra DRX-8.4	Yamaha RX-V6A
Front Panel	Audiophile Grade Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
A.R.T. Wedge
Speaker Terminals	15	9
Large Speaker Terminals	15	9
Color-Coded Speaker Terminals
Gold plated RCA terminals
Rack Mount Kit Available	IRK-180-4C

POWER	Integra DRX-8.4	Yamaha RX-V6A
Power Supply	AC 220-230 V, 50/60 Hz	AC 110-120 V, 60 Hz
H.C.P.S. (High Current Power Supply)	Massive Custom Transformer
Toroidal Transformer
Power Consumption	1190 W	360 W
Standby Power	0.2 W	0.1 W
ECO Mode / Hybrid Standby Function
Auto Power Standby

PHYSICAL	Integra DRX-8.4	Yamaha RX-V6A
Dimensions (W x H x D)	435 mm x 198 mm x 470 mm 17-1/8" x 7-13/16" x 18-1/2"	435 mm x 171 mm x 377 mm (with antenna: 435 mm x 245 mm x 377 mm) 17-1/8" x 6-3/4" x 14-7/8" (with antenna up: 17-1/8" x 9-5/8" x 14-7/8")
Weight	22.5 kg (49.6 lbs)	9.8 kg (21.6 lbs)

SPECIFICATIONS	Integra DRX-8.4	Yamaha RX-V6A
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)		100 W (0.06% THD)
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)		105 W (0.9% THD)
Rated Power Output (8 Ω, 1 kHz, 1 channel Driven)		125 W (0.9% THD)
Maximum Effective Output Power (8 Ω, 1 kHz, 1 channel Driven, JEITA)		150 W (10% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	260 W (10% THD)	160 W (10% THD)
Rated Power Output (4 Ω, 1 kHz, 1 channel Driven)		150 W (0.9% THD)
THD	0.08% (20 Hz - 20 kHz, half power)	0.04% (AUDIO 3 etc. to Front, Pure Direct, 20 Hz - 20 kHz, 50 W, 8 Ω)
THD (Phono)		0.02% (Phono to PRE OUT, Pure Direct, 1 kHz, 1 V)
Damping Factor		100 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ	3.5 mV/47 kΩ
Maximum Input Sensitivity (Line)		2.4 V (1 kHz, 0.5% THD)
Maximum Input Sensitivity (Phono)		45 mV (1 kHz, 0.5% THD)
Rated Preout Level and Impedance	1 V/470 Ω	1.0 V/470Ω
Maximum Preout Level and Impedance		2.0 V
Rated XLR Output Level and Impedance	2 V/220 Ω
Rated Headphone Jack Output Level and Impedance	8 Ω - 600 Ω
Rated Headphone Power Output	75 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	107 dB	110 dB
S/N Ratio (Phono MM, IHF-A)	78 dB	95 dB
Phono RIAA Deviation		±0.5 dB
Frequency Response (Analog In)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)	+0/-3 dB (AUDIO 3 etc. to Front, Pure Direct, 10 Hz to 100 kHz)
Residual noise (IHF-A Network)		150 µV (Speaker Out)
Channel Separation at 1 kHz/10 kHz (LINE)		70 dB/50 dB
Channel Separation at 1 kHz/10 kHz (Phono)		60 dB/55 dB
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	11.2 MHz, 5.6 MHz, 2.8 MHz	11.2 MHz, 5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Ethernet Standard	10BASE-T/100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n/ac	IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz, 5 GHz
Bluetooth Version	4․2	4․2
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	Ver. 2.0, 5 V, 1 A	USB2.0 5 V, 1 A
FM Frequency		87.5/87.50 MHz - 108.0/108.00 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 3 µV (20.8 dBf)
FM S/N Ratio		Mono/Stereo: 69 dB/68 dB
FM Harmonic Distortion (IHF, 1 kHz)		Mono/Stereo: 0.5%/0.6%
AM Frequency		530/531 kHz to 1710/1611 kHz
Warranty	3 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted