Integra DRX-8.4 vs Marantz SR5010

Here we are comparing Integra DRX-8.4 to Marantz SR5010 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Integra DRX-8.4 has 11 channel and the Marantz SR5010 has 7 channel amplifiers.

Integra DRX-8.4

Marantz SR5010

Integra DRX-8.4 was introduced in 2023 and represents a current flagship model of a manufacturer. It is equipped with 11 channel amplifier with 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 8K/60Hz and 4K/120Hz and upscales from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz video signal.

Marantz SR5010 was introduced in 2015. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales up to 4K 30/25/24p 4:4:4 video signal.

We evaluated Integra DRX-8.4 and Marantz SR5010 and gave them scores of 93 and 87 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Integra DRX-8.4 over Marantz SR5010.

	Integra DRX-8.4	vs	Marantz SR5010
More Channels	11.4	vs	7.2
Higher Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification	Select™ (previously known as Select2)	vs
Bi-amp capability	Front L/R and Center Channels	vs	assignable
Higher DAC Specs	768 kHz/32 Bit	vs	[]
More Channel Processing	11.2	vs	7.1
Dolby Atmos Height Virtualization		vs
IMAX Enhanced		vs
Auro 3D with Auro-Matic Upmixer		vs
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM	vs	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	vs	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	vs	Apple Lossless, WAV, FLAC, AIFF, DSD
DSD via HDMI	2-ch/Multi-ch Input	vs
DTS Dialog Control		vs
Dialog Enhancement		vs
Independent Subwoofer Outputs	2 independent + 2 parallel	vs
HDR10+		vs
Enhanced Audio Return Channel (eARC)		vs
Newer HDCP Version	2.3	vs	2.2
QMS		vs
Auto Low Latency Mode Pass-through		vs
VRR		vs
QFT		vs
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	vs	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	vs	up to 4K 30/25/24p 4:4:4
Works with Amazon Alexa		vs
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi	via Integra Music Control App	vs
Domotz Pro Compatible		vs
OvrC Compatible		vs
AirPlay	AirPlay 2	vs	AirPlay
More HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	vs	2 (1 for MAIN, 1 for ZONE2)
More 8K Inputs	6	vs
More Optical Inputs	3	vs	2
XLR Line Inputs	1	vs
Phono Input		vs
More RCA Pre-Outs	11.4	vs	7.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers	vs
More Zones	3	vs	2
More Powered Zones	2 and 3	vs	2
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	vs	Pre Out
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)	vs	1
Remote (IR) Input/Output	2 / 1	vs	[]
More GUI Languages	9	vs	3
Tidal		vs
Deezer		vs
More Speaker Terminals	15	vs	7
More Large Speaker Terminals	15	vs	7
Gold plated RCA terminals		vs
Bigger Power Supply	1190 W	vs	650 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	260 W (10% THD)	vs	200 W (10% THD)
Higher S/N Ratio (Line, IHF-A)	107 dB	vs	100 dB
Higher DSD Sampling Rate via USB	11.2 MHz, 5.6 MHz, 2.8 MHz	vs	2.8 MHz
Wi-Fi Standard	IEEE 802.11 a/b/g/n/ac	vs	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	vs	2.4 GHz
Newer Bluetooth Version	4․2	vs	2․1 + EDR

This section shows those features and specifications which are the reason to choose Marantz SR5010 over Integra DRX-8.4.

	Integra DRX-8.4	vs	Marantz SR5010
Dolby Digital EX		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Component Video Maximum Resolution	480i/576i	vs	1080p
isf Certified Calibration Control		vs
More HDMI Inputs	7 (1 front)	vs	8 (1 front)
Multi-Channel Input		vs	7.1
More Composite Video Outputs		vs	1
More Component Video Inputs	1	vs	2
More Component Video Outputs		vs	1
Front A/V Inputs	HDMI	vs	HDMI, USB
Analog Tuner		vs	FM/AM
Pandora		vs
SiriusXM		vs
Color-Coded Speaker Terminals		vs

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Integra DRX-8.4	Marantz SR5010
Dolby Atmos
DTS:X
Auto Speaker Calibration System with Mic.	Dirac Live™ Premium Licence	Audyssey MultEQ XT
HDR10
Dolby Vision
New HDCP Version	2.3	2.2
Analog To HDMI Upconversion	Component**, Composite	Component, Composite
Wi-Fi
Bluetooth	SBC, AAC, aptX, aptX HD
Many HDMI Inputs	7 (1 front)	8 (1 front)
USB Input	1	1 (Front) for USB memory
RCA Pre-Outs	11.4	7.2
Composite Video Inputs	2	2
Component Video Inputs	1	2
Ethernet
Spotify

WEAKNESSES	Integra DRX-8.4	Marantz SR5010
No Front Wide Channel Support
No Digital Radio

Integra DRX-8.4	Marantz SR5010
11 channel All new symmetric Class AB Amplifier: Integra DRX-8.4 features 11 channel power amplifier with All new symmetric Class AB design. It is rated at 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Marantz SR5010 features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Current Feedback Topology: Marantz SR5010 features Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.
• HDAM (Hyper Dynamic Amplifier Module): Marantz SR5010 features exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.

THX™ Select™ (previously known as Select2) certification

Integra DRX-8.4 is THX™ Select™ (previously known as Select2) certified. This means that it is ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Integra DRX-8.4	Marantz SR5010
Channels	11.4	7.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	Front L/R and Center Channels	assignable

Integra DRX-8.4's and Marantz SR5010's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Integra DRX-8.4: 5.4.2, 5.4.4, 7.4.2, 7.4.4 with internal amplifier.
Marantz SR5010: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Integra DRX-8.4: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.4.2, 5.4.4, 7.4.2, 7.4.4 with internal amplifier.
Marantz SR5010: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Integra DRX-8.4: 5.4, 7.4 with internal amplifier.
Marantz SR5010: 5.2, 7.2 with internal amplifier.
• Bi-Amp: Integra DRX-8.4 is able to bi-amp up to 3 and Marantz SR5010 is able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Integra DRX-8.4 and Marantz SR5010 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Integra DRX-8.4 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Integra DRX-8.4 and Marantz SR5010 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Integra DRX-8.4 supports DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Integra DRX-8.4 supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Integra DRX-8.4 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Integra DRX-8.4	Marantz SR5010
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Integra DRX-8.4 comes with 6 HDMI 2.1 inputs with 8K support and 1 inputs with 4K support. It has 3 outputs - 1 MAIN and 1 SUB and 1 ZONE 2.

Marantz SR5010 comes with 8 HDMI inputs. It has 2 outputs - 1 for MAIN and 1 for ZONE2.

• 8K/60Hz and 4K/120Hz Passthrough on Integra DRX-8.4: 6 out of 7 inputs pass up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit and the rest of the inputs pass up to 4K 50/60Hz 4:4:4 video signal.
  4K/60Hz Passthrough on Marantz SR5010: All inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 8K Upscaling on Integra DRX-8.4: It can upscale from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz from HDMI and analog sources.
  4K Upscaling on Marantz SR5010: It can upscale up to 4K 30/25/24p 4:4:4 from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP Copy Protection: Integra DRX-8.4 is HDCP 2.3 and Marantz SR5010 is HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on Integra DRX-8.4 only).
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Integra DRX-8.4 supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma.

Marantz SR5010 supports HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Integra DRX-8.4 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Integra DRX-8.4 supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Integra DRX-8.4	Marantz SR5010
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	up to 4K 30/25/24p 4:4:4

TERMINALS	Integra DRX-8.4	Marantz SR5010
HDMI Inputs	7 (1 front)	8 (1 front)
HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	2 (1 for MAIN, 1 for ZONE2)
8K Inputs	6
USB Input	1	1 (Front) for USB memory
USB DC Out Port
Optical Inputs	3	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	4	4
RCA Line Outputs
XLR Line Inputs	1
Phono Input
Multi-Channel Input		7.1
RCA Pre-Outs	11.4	7.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers
Composite Video Inputs	2	2
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs	1	2
Component Video Outputs		1

GENERAL	Integra DRX-8.4	Marantz SR5010
Brand	Integra	Marantz
Model	DRX-8.4	SR5010
Type	A/V Receiver	A/V Receiver
Country	Australia and Asia	USA
Release Year	2023	2015
Predecessor	Integra DRX-7.3	Marantz SR5009
Successor		Marantz SR5011

AMPLIFIER	Integra DRX-8.4	Marantz SR5010
Channels	11.4	7.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	All new symmetric Class AB
Current Feedback Topology
Discrete Amplification
HDAM
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	Front L/R and Center Channels	assignable

AUDIO FEATURES	Integra DRX-8.4	Marantz SR5010
DAC	Two precision 32-bit ESS ES9026PRO Hyperstream II
DAC Specs	768 kHz/32 Bit
Maximum Channel Processing	11.2	7.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	Apple Lossless, WAV, FLAC, AIFF, DSD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control	All Channels
Compressed Music Enhancer	Advanced Music Optimizer	MDAX2
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Direct Mode
Virtual Speakers	T-D (Theater-Dimensional)
Independent Subwoofer Outputs	2 independent + 2 parallel

CALIBRATION	Integra DRX-8.4	Marantz SR5010
Auto Speaker Calibration System with Mic.	Dirac Live™ Premium Licence	Audyssey MultEQ XT
Calibration Microphone	Setup via Dirac PC/MAC app and optional USB mic (Advanced), OR free Integra mobile app and included wired mic (Basic)
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Integra DRX-8.4	Marantz SR5010
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	up to 4K 30/25/24p 4:4:4
Analog To HDMI Upconversion	Component**, Composite	Component, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	480i/576i	1080p
isf Certified Calibration Control

CONNECTIVITY	Integra DRX-8.4	Marantz SR5010
Wi-Fi
Bluetooth	SBC, AAC, aptX, aptX HD
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
HEOS
DTS Play-Fi	via Integra Music Control App
MHL Input
DLNA 1.5
Domotz Pro Compatible
Remote Monitoring with ihiji
OvrC Compatible
AirPlay	AirPlay 2	AirPlay
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Integra Remote Control App	Marantz Remote App for iOS and Android devices
InstaPrevue Input Source Prevue

TERMINALS	Integra DRX-8.4	Marantz SR5010
HDMI Inputs	7 (1 front)	8 (1 front)
HDMI Outputs	3 (1 MAIN, 1 SUB, 1 ZONE 2)	2 (1 for MAIN, 1 for ZONE2)
8K Inputs	6
USB Input	1	1 (Front) for USB memory
USB DC Out Port
Optical Inputs	3	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	4	4
RCA Line Outputs
XLR Line Inputs	1
Phono Input
Multi-Channel Input		7.1
RCA Pre-Outs	11.4	7.2
XLR Pre-outs	Front L/R, Center and 2 subwoofers
Composite Video Inputs	2	2
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs	1	2
Component Video Outputs		1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI	HDMI, USB
Speaker A/B		assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
Flasher In
Remote Control In/Out		1 / 1

ZONES	Integra DRX-8.4	Marantz SR5010
Number of Zones	3	2
Powered Zones	2 and 3	2
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	Pre Out
Zone 3 Outs	RCA Pre/Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)	1
Remote (IR) Input/Output	2 / 1

MISCELLANEOUS	Integra DRX-8.4	Marantz SR5010
On-Screen Display	High-definition GUI over HDMI	Advanced Graphic User Interface
GUI Languages	9	3
Web Control
IP Control
Control4 SDDP
Display		port hole
Remote Controller		RC024SR
Pre-programmed / Learnable / LCD Display		/ /
Setup Assistant

RADIO	Integra DRX-8.4	Marantz SR5010
Analog Tuner		FM/AM
Presets	40
Digital Radio
Internet Radio	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Integra DRX-8.4	Marantz SR5010
Front Panel	Audiophile Grade Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
Speaker Terminals	15	7
Large Speaker Terminals	15	7
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals
Rack Mount Kit Available	IRK-180-4C

POWER	Integra DRX-8.4	Marantz SR5010
Power Supply	AC 220-230/240 V, 50/60 Hz	AC 120 V, 60 Hz
H.C.P.S. (High Current Power Supply)	Massive Custom Transformer
Toroidal Transformer		(EI)
Power Consumption	1190 W	650 W
No Sound Power		ECO On/Off: 45 W/75 W
Standby Power	0.2 W	0.2 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Integra DRX-8.4	Marantz SR5010
Dimensions (W x H x D)	435 mm x 198 mm x 470 mm 17-1/8" x 7-13/16" x 18-1/2"	440 mm x 161 mm x 346 mm (with antenna: 440 mm x 230 mm x 346 mm) 17-5/16" x 6-5/16" x 13-5/8" (with antenna up: 17-5/16" x 9-1/16" x 13-5/8")
Weight	22.5 kg (49.6 lbs)	10.0 kg (22 lbs 1 oz)

SPECIFICATIONS	Integra DRX-8.4	Marantz SR5010
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)		100 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)		140 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	260 W (10% THD)	200 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)		180 W (1% THD)
THD	0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ
Rated Preout Level and Impedance	1 V/470 Ω
Rated XLR Output Level and Impedance	2 V/220 Ω
Rated Headphone Jack Output Level and Impedance	8 Ω - 600 Ω
Rated Headphone Power Output	75 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	107 dB	100 dB
S/N Ratio (Phono MM, IHF-A)	78 dB
Frequency Response (Analog In)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz
DSD Sampling Rates via USB	11.2 MHz, 5.6 MHz, 2.8 MHz	2.8 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response		5 Hz to 60 MHz, 0 dB/-3 dB (Component) 5 Hz to 10 MHz, 0 dB/-3 dB (Composite)
Ethernet Standard	10BASE-T/100BASE-TX	100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n/ac	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz
Bluetooth Version	4․2	2․1 + EDR
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	Ver. 2.0, 5 V, 1 A	USB2.0 5V, 1 A
FM Frequency		87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 2.8 µV (20.2 dBf)
FM Effective Sensitivity		1.2 µV (12.8 dBf)
FM S/N Ratio		Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)		Mono/Stereo: 0.7%/1.0%
AM Frequency		530 kHz - 1710 kHz
AM Effective Sensitivity		18 µV
Warranty	3 Years	3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted