Integra DRX-5.4 vs Onkyo TX-NR414

Here we are comparing Integra DRX-5.4 to Onkyo TX-NR414 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Integra DRX-5.4 has 9 channel and the Onkyo TX-NR414 has 5 channel amplifiers with Integra DRX-5.4's being more powerful.

Integra DRX-5.4	Onkyo TX-NR414
Integra DRX-5.4 was introduced in 2021. It is equipped with 9 channel amplifier with 120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz and upscales from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz video signal.	Onkyo TX-NR414 was introduced in 2012. It is equipped with 5 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz and 2 channel driven) power per channel and is capable of 5.1 maximum channel processing. It , passes 1080/60p video signal.

We evaluated Integra DRX-5.4 and Onkyo TX-NR414 and gave them scores of 93 and 67 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Integra DRX-5.4 over Onkyo TX-NR414.

	Integra DRX-5.4	vs	Onkyo TX-NR414
More Channels	9.2	vs	5.1
Higher Power Output	120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
VLSC (Vector Linear Shaping Circuitry)	Front L/R	vs
THX™ Certification	Select™ (previously known as Select2)	vs
Certified 4 Ω Performance		vs
Bi-amp capability	Front L/R Channels	vs
More Channel Processing	11.2	vs	5.1
Dolby Atmos		vs
Dolby Atmos Height Virtualization		vs
Dolby Surround Upmixer		vs
DTS:X		vs
DTS Neural:X		vs
DTS-ES		vs
IMAX Enhanced		vs
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	vs	FLAC, WAV, WMA, WMA Lossless, Ogg, MP3, LPCM, AAC
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	vs	FLAC, WAV, WMA Lossless, LPCM, AAC
Gapless Playback		vs
DSD via USB	2-ch Input	vs
DTS Dialog Control		vs
Dialog Normalization		vs
More Tone Control Channels	All Channels	vs	Front L/R Channels
THX Processing Mode		vs
More Advanced Auto Speaker Calibration System	Dirac Live™ and AccuEQ Advance Room Corrections	vs
HDR10		vs
HDR10+		vs
BT.2020 color space		vs
Dolby Vision		vs
HLG		vs
Enhanced Audio Return Channel (eARC)		vs
Newer HDCP Version	2.3	vs	2.2
QMS		vs
Auto Low Latency Mode Pass-through		vs
VRR		vs
QFT		vs
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	vs	up to 1080p
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz	vs
Analog To HDMI Upconversion	Component**, Composite	vs
Wi-Fi		vs	via Front USB (optional UWF-1 sold separately)
Bluetooth	SBC, AAC, aptX, aptX HD	vs
Works with Amazon Alexa		vs
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi	via Integra Music Control App	vs
AirPlay	AirPlay 2	vs
More HDMI Inputs	7 (1 front)	vs	6
More HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	vs	1
More 8K Inputs	7	vs
Phono Input		vs
More RCA Pre-Outs	11.2 (barter to Zone 3 Pre/Line Out)	vs	0.1
Detachable Power Cord		vs
More Zones	3	vs	2
More Powered Zones	2 and 3	vs
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	vs	RCA Line Out
Whole House Mode		vs
RS-232C Interface		vs
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)	vs
Remote (IR) Input/Output	2 / 1	vs
Tidal		vs
Deezer		vs
More Speaker Terminals	11	vs	5
More Large Speaker Terminals	11	vs	5
Gold plated RCA terminals		vs
Bigger Power Supply	850 W	vs	400 W
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	120 W (0.08% THD)	vs	80 W (0.7% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	250 W (10% THD)	vs	160 W
Higher Dynamic Power per Channel, 3 Ω, Front)	250 W	vs	180 W
Higher Dynamic Power per Channel, 4 Ω, Front)	220 W	vs	160 W
Higher Dynamic Power per Channel, 8 Ω, Front)	130 W	vs	100 W
Higher S/N Ratio (Line, IHF-A)	106 dB	vs	100 dB
Longer Warranty	3 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Onkyo TX-NR414 over Integra DRX-5.4.

	Integra DRX-5.4	vs	Onkyo TX-NR414
Dolby Pro Logic		vs	PLII
DTS Neo		vs	Neo:6
Pure Audio Mode		vs
InstaPrevue Input Source Prevue		vs
More Optical Inputs	1	vs	2
More Coaxial Inputs/Outputs	1	vs	2
More Composite Video Inputs	2	vs	5 (1 front)
More Composite Video Outputs		vs	1
More Component Video Inputs	1	vs	2
More Component Video Outputs		vs	1
Front A/V Inputs	HDMI	vs	USB, Composite Video, RCA Audio
Analog Tuner	FM/AM	vs	FM/AM with RDS
Color-Coded Speaker Terminals		vs
Wider AM Frequency Range	530 kHz - 1710 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Integra DRX-5.4	Onkyo TX-NR414
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
New HDCP Version	2.3	2.2
USB Input	1 (Rear)	1 Front (for iPod/iPhone)
Many RCA Line Inputs	6	6 (1 front)
Composite Video Inputs	2	5 (1 front)
Component Video Inputs	1	2
Ethernet
Analog Tuner	FM/AM	FM/AM with RDS
Pandora
Spotify

WEAKNESSES	Integra DRX-5.4	Onkyo TX-NR414
No Auro 3D with Auro-Matic Upmixer
No Digital Radio

Integra DRX-5.4	Onkyo TX-NR414
9 channel Amplifier: Integra DRX-5.4 features 9 channel power amplifier. It is rated at 120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	5 channel Amplifier: Onkyo TX-NR414 features 5 channel power amplifier. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven).

• WRAT (Wide Range Amp Technology): Onkyo TX-NR414 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.

THX™ Select™ (previously known as Select2) certification

Integra DRX-5.4 is THX™ Select™ (previously known as Select2) certified. This means that it is ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Integra DRX-5.4	Onkyo TX-NR414
Channels	9.2	5.1
Power Output	120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
VLSC (Vector Linear Shaping Circuitry)	Front L/R
Optimum Gain Volume Circuitry
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	Front L/R Channels

Integra DRX-5.4's and Onkyo TX-NR414's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Integra DRX-5.4: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Onkyo TX-NR414: Not supported.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Integra DRX-5.4: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Onkyo TX-NR414: Not supported.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Integra DRX-5.4: 5.2, 7.2 with internal amplifier.
Onkyo TX-NR414: 5.1 with internal amplifier.
• Bi-Amp: Integra DRX-5.4 is able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Integra DRX-5.4 supports Dolby Atmos.

• Dolby Surround Upmixer: Integra DRX-5.4 supports Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Integra DRX-5.4 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Integra DRX-5.4 supports DTS:X.

• DTS Neural:X: Integra DRX-5.4 supports DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Integra DRX-5.4 supports DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

IMAX Enhanced

Integra DRX-5.4 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Integra DRX-5.4	Onkyo TX-NR414
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic		PLII
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Integra DRX-5.4 comes with 7 HDMI 2.1 inputs with 8K support. It has 2 outputs - 1 Main and 1 Sub/Zone2.

Onkyo TX-NR414 comes with 6 HDMI inputs. It has 1 output.

• 8K/60Hz and 4K/120Hz Passthrough on Integra DRX-5.4: All inputs pass up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit video signal.
  1080/60p Passthrough on Onkyo TX-NR414: All inputs pass up to 1080p video signal.
• 8K Upscaling on Integra DRX-5.4: It can upscale from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz from HDMI and analog sources.
• Analog To HDMI Upconversion: Integra DRX-5.4 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on Integra DRX-5.4 only).
• HDCP Copy Protection: Integra DRX-5.4 is HDCP 2.3 and Onkyo TX-NR414 is HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on Integra DRX-5.4 only).
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Integra DRX-5.4 supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma.

Onkyo TX-NR414 does not support HDR. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Integra DRX-5.4 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Integra DRX-5.4 supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Integra DRX-5.4	Onkyo TX-NR414
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 1080p
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz

TERMINALS	Integra DRX-5.4	Onkyo TX-NR414
HDMI Inputs	7 (1 front)	6
HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	1
8K Inputs	7
USB Input	1 (Rear)	1 Front (for iPod/iPhone)
USB DC Out Port
Optical Inputs	1	2
Optical Outputs
Coaxial Inputs	1	2
RCA Line Inputs	6	6 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2 (barter to Zone 3 Pre/Line Out)	0.1
XLR Pre-outs
Composite Video Inputs	2	5 (1 front)
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs	1	2
Component Video Outputs		1

GENERAL	Integra DRX-5.4	Onkyo TX-NR414
Brand	Integra	Onkyo
Model	DRX-5.4	TX-NR414
Type	A/V Receiver	A/V Receiver
Country	North America	Europe and Australia
Release Year	2021	2012
Predecessor	Integra DRX-5.3

AMPLIFIER	Integra DRX-5.4	Onkyo TX-NR414
Channels	9.2	5.1
Power Output	120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Non-Phase Shift Amplifier
WRAT (Wide Range Amplifier Technology)
VLSC (Vector Linear Shaping Circuitry)	Front L/R
Optimum Gain Volume Circuitry
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability	Front L/R Channels
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Integra DRX-5.4	Onkyo TX-NR414
Digital Processing Crossover Network
Digital Signal Processing (DSP) Engine	32-Bit DSP Chip for Advanced Processing	Advanced 32-Bit Processing DSP Chip
DAC		Burr-Brown
DAC Specs	192 kHz/24 Bit	192 kHz/24 Bit
Maximum Channel Processing	11.2	5.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic		PLII
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM	FLAC, WAV, WMA, WMA Lossless, Ogg, MP3, LPCM, AAC
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC	FLAC, WAV, WMA Lossless, LPCM, AAC
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction	PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control	All Channels	Front L/R Channels
Compressed Music Enhancer	Advanced Music Optimizer	Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Virtual Speakers	T-D (Theater-Dimensional)	T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Integra DRX-5.4	Onkyo TX-NR414
Auto Speaker Calibration System with Mic.	Dirac Live™ and AccuEQ Advance Room Corrections
Standing Wave Control	Standing Wave EQ

VIDEO FEATURES	Integra DRX-5.4	Onkyo TX-NR414
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit	up to 1080p
Video Signal Upscaling	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz
Analog To HDMI Upconversion	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Integra DRX-5.4	Onkyo TX-NR414
Wi-Fi		via Front USB (optional UWF-1 sold separately)
Bluetooth	SBC, AAC, aptX, aptX HD
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
DTS Play-Fi	via Integra Music Control App
MHL Input
DLNA 1.5
Domotz Pro Compatible
OvrC Compatible
AirPlay	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod and iPhone via front USB
Remote App	Integra Remote Control App	iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Integra DRX-5.4	Onkyo TX-NR414
HDMI Inputs	7 (1 front)	6
HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	1
8K Inputs	7
USB Input	1 (Rear)	1 Front (for iPod/iPhone)
USB DC Out Port
Optical Inputs	1	2
Optical Outputs
Coaxial Inputs	1	2
RCA Line Inputs	6	6 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2 (barter to Zone 3 Pre/Line Out)	0.1
XLR Pre-outs
Composite Video Inputs	2	5 (1 front)
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs	1	2
Component Video Outputs		1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI	USB, Composite Video, RCA Audio
Speaker A/B
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
uport

ZONES	Integra DRX-5.4	Onkyo TX-NR414
Number of Zones	3	2
Powered Zones	2 and 3
Zone 2 Outs	HDMI, RCA Pre/Line Out (shared with Zone B Line out)	RCA Line Out
Zone 3 Outs	RCA Pre/Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	3 (A:100 mA, B:25 mA, C:25 mA)
Remote (IR) Input/Output	2 / 1

MISCELLANEOUS	Integra DRX-5.4	Onkyo TX-NR414
On-Screen Display	High-definition GUI over HDMI	Basic Overlay
GUI Languages	9
IP Control
Control4 SDDP
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote		/
On Screen Remote Programming
Bi-directional Remote Setup via GUI
Activity Based Remote
Smart Grid-Ready

RADIO	Integra DRX-5.4	Onkyo TX-NR414
Analog Tuner	FM/AM	FM/AM with RDS
Presets	40	40
Digital Radio
Internet Radio	TuneIn	vTuner
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Integra DRX-5.4	Onkyo TX-NR414
Front Panel	Audiophile Grade Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
Speaker Terminals	11	5
Large Speaker Terminals	11	5
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
Gold plated RCA terminals
Rack Mount Kit Available	IRK-180-4C

POWER	Integra DRX-5.4	Onkyo TX-NR414
Power Supply	AC 120 V, 60 Hz	AC 230 V, 50 Hz
Independent Power Supply
H.C.P.S. (High Current Power Supply)	Massive Custom Transformer	Massive High Power Transformer
Toroidal Transformer
Power Consumption	850 W	400 W
No Sound Power		55 W
Standby Power	0.1 W	0.2 W
ECO Mode / Hybrid Standby Function

PHYSICAL	Integra DRX-5.4	Onkyo TX-NR414
Dimensions (W x H x D)	435 mm x 198 mm x 388.5 mm 17-1/8" x 7-13/16" x 15-13/16"	435 mm x 173.5 mm x 328 mm 17-1/8" x 6-13/16" x 12-15/16"
Dimensions of Package (W x H x D)	560 mm x 320 mm x 462 mm 22-1/16" x 12-5/8" x 18-3/16"
Weight	14.0 kg (30.9 lbs)	9.0 kg (19.8 lbs)
Weight of Package	17.0 kg (37.5 lbs)

SPECIFICATIONS	Integra DRX-5.4	Onkyo TX-NR414
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	120 W (0.08% THD)	80 W (0.7% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)		110 W (0.9% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)		130 W (1% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	250 W (10% THD)	160 W
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)		130 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)	250 W	180 W
Dynamic Power per Channel (4 Ω, Front)	220 W	160 W
Dynamic Power per Channel (8 Ω, Front)	130 W	100 W
THD	0.08% (20 Hz - 20 kHz, half power)	0.08% (20 Hz - 20 kHz, half power)
Damping Factor		60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ (Line)	200 mV/47 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ
Rated Preout Level and Impedance	1 V/470 Ω
Rated Lineout Level and Impedance		200 mV/2.2 kΩ
Maximum Lineout Level and Impedance		2 V/2.2 kΩ
Rated Headphone Jack Output Level and Impedance	8 Ω - 600 Ω
Rated Headphone Power Output	85 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	106 dB	100 dB
S/N Ratio (Phono MM, IHF-A)	80 dB
Frequency Response (Analog In)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct)	5 Hz - 100 kHz/+1 dB, -3 dB (DSP bypass)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response		5 Hz - 100 MHz/+0 dB, -3 dB (Component)
Ethernet Standard	10BASE-T/100BASE-TX	100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz
Bluetooth Version	4․2
Bluetooth Frequency	2.4 GHz
USB Terminal	Ver. 2.0, 5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 1.0 µV (11.2 dBf)
AM Frequency	530 kHz - 1710 kHz	522/530 kHz - 1611/1710 kHz
Warranty	3 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted