Integra DRX-5.2 vs Onkyo TX-NR5010 Detailed Comparison
image not found
SCORE:
91
SCORE:
86

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Integra DRX-5.2 to Onkyo TX-NR5010 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 9 channel amplifiers.

Let us have a look at some highlights of the models.

Integra DRX-5.2 Highlights

Onkyo TX-NR5010 Highlights

  • 9.2 channels
  • 120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • THX Select™ certified
  • Dolby Atmos, DTS:X capable
  • HDR10, Dolby Vision, 4K Passthrough
  • Airplay, Chromecast, DTS Play-Fi
  • Ethernet
  • USB and Phono inputs
  • 9.2 channels
  • 145 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • THX Ultra2 Plus certified
  • 4K Upscaling, 1080p Passthrough
  • DLNA
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs

We have evaluated both receivers. Integra DRX-5.2 gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Integra DRX-5.2

Onkyo TX-NR5010

AMPLIFIER
92
VIDEO FEATURES
95
AUDIO FEATURES
89
CONNECTIVITY
84
MULTIZONE
93
MISCELLANEOUS
89
RADIO
90
OVERALL
91
AMPLIFIER
98
VIDEO FEATURES
71
AUDIO FEATURES
84
CONNECTIVITY
88
MULTIZONE
92
MISCELLANEOUS
81
RADIO
88
OVERALL
86

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Integra DRX-5.2

This section shows those features and specifications which are the reason to choose Integra DRX-5.2 over Onkyo TX-NR5010.

Integra DRX-5.2 has higher DSD sampling rate via USB. It supports Dolby Atmos, DTS:X, gapless playback, SONOS, Tidal and Deezer. It has DTS Dialog Control. In video department only Integra DRX-5.2 supports HDR10, Dolby Vision and Hybrid Log Gamma.

Integra DRX-5.2 Onkyo TX-NR5010
Dolby Atmos
Dolby Surround Upmixer
DTS:X
DTS Neural:X
Gapless Playback
DTS Dialog Control
HDR10
BT.2020 color space
Dolby Vision
HLG
Video Signal Passthrough up to 4K 50/60Hz 4:4:4 up to 1080p
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with SONOS
AirPlay Airplay
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Zone 3 Outs RCA Pre/Line Out RCA Line Out
+12V Trigger Output 3 (A:100 mA, B:25 mA, C:25 mA) 2 (Zone2, Zone 3)
Remote (IR) Input/Output 2 / 1 1 / 1
Smart Grid-Ready
Tidal
Deezer
Gold plated RCA terminals
Longer Warranty 3 Years 2 Years
Higher DSD Sampling Rate via USB 2.8 MHz, 5.6 MHz, 11.2 MHz 2.8 MHz

Advantage of Onkyo TX-NR5010

This section shows those features and specifications which are the reason to choose Integra DRX-5.2 over Onkyo TX-NR5010.

Integra DRX-5.2 has higher DSD sampling rate via USB. It supports Dolby Atmos, DTS:X, gapless playback, SONOS, Tidal and Deezer. It has DTS Dialog Control. In video department only Integra DRX-5.2 supports HDR10, Dolby Vision and Hybrid Log Gamma.

Integra DRX-5.2 Onkyo TX-NR5010
Front Wide Channel Support
VLSC (Vector Linear Shaping Circuitry) Front L/R All Channels
THX™ Certification Select™ (previously known as Select2) Ultra2 Plus
Dolby Pro Logic PLIIz
Dolby Digital EX
DTS Neo Neo:X
Music Playback via USB FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD FLAC, WAV, Apple Lossless, WMA, WMA Lossless, Ogg, MP3, DSD, Dolby TruHD, LPCM, AAC
High Resolution Audio Formats via USB FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD FLAC, WAV, Apple Lossless, DSD, WMA Lossless, LPCM, AAC, Dolby TrueHD
Dialogue Lift Screen Centered Dialog
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey DSX
Pure Audio Mode
Component Video Upscaling *
Analog to Analog Video conversion Composite, PC
Component Video Maximum Resolution 480i/576i 1080p
isf Certified Calibration Control
InstaPrevue Input Source Prevue
Wi-Fi via Front USB (optional UWF-1 sold separately)
Bluetooth via Front USB (optional UBT-1 adapter sold separately)
More HDMI Inputs 7 (1 front) 9 (1 front)
USB Input 1 (Rear) 1 Front (for iPod/iPhone) and 1 Rear
More Analog Audio Line Inputs 6 7 (1 front)
More Optical Inputs 2 4 (1 front)
More Coaxial Inputs/Outputs 1 / 3 /
More Composite Video Inputs 2 5 (1 front)
More Composite Video Outputs 1
More Component Video Outputs 1
PC In
More Analog Pre-Outs 11.2 (shared with Zone 3 Line/Pre Out) 11.4
Front A/V Inputs HDMI HDMI/MHL, USB, Composite Video, RCA Audio, Optical
Pandora
Color-Coded Speaker Terminals
Independent Power Supply 2 4
Toroidal Transformer
Bigger Power Supply 870 W 1160 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 215 W (10% THD) 280 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC) 180 W (1% THD) 220 W (1% THD)
Higher Dynamic Power per Channel, 3 Ω, Front) 250 W 400 W
Higher Dynamic Power per Channel, 4 Ω, Front) 220 W 300 W
Higher Dynamic Power per Channel, 8 Ω, Front) 130 W 180 W
Lower THD 0.08% (20 Hz - 20 kHz, half power) 0.05% (20 Hz - 20 kHz, half power)
Higher S/N Ratio (Line, IHF-A) 106 dB 110 dB

Common Strengths and Weaknesses

Here we list common strengths and weaknesses of both receivers.

STRENGTHS
THX™ Certification 👍
Certified 4 Ω Performance 👍
Bi-amp Capability 👍
Many Channel Processing 👍
Dolby TrueHD 👍
Dolby Digital Plus 👍
DTS-HD Master Audio 👍
DTS-HD High Resolution Audio 👍
DTS 96/24 👍
DTS Express 👍
DTS-ES 👍
High Resolution Music Playback via USB and/or Network 👍
DSD via HDMI 👍
DSD via USB 👍
Dialog Normalization 👍
Compressed Music Enhancer 👍
THX Processing Mode 👍
Auto Speaker Calibration System with Mic. 👍
3-D Ready 👍
Analog To HDMI Upconversion 👍
Ethernet 👍
New HDCP Version 👍
Many HDMI Inputs 👍
USB Input 👍
Many Analog Audio Line Inputs 👍
Phono Input 👍
Composite Video Inputs 👍
Component Video Inputs 👍
Analog Pre-Outs 👍
Zones 👍
Detachable Power Cord 👍
Analog Tuner 👍
Spotify 👍
Independent Power Supply 👍
H.C.P.S. (High Current Power Supply) 👍
WEAKNESSES
No Dolby Atmos Height Virtualization 👎
No DTS Virtual:X 👎
No IMAX Enhanced 👎
No Auro 3D with Auro-Matic Upmixer 👎
No High-resolution Music Enhancer 👎
No HDR10+ 👎
Does not Work with Amazon Alexa 👎
No eARC 👎
No Multi-Channel Input 👎
No Napster 👎
No SiriusXM Internet Radio 👎

Selected Features

Amplifier

Integra DRX-5.2 and Onkyo TX-NR5010 have 9 channel amplifiers. Integra DRX-5.2 delivers 120 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Onkyo TX-NR5010 delivers 145 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load.


Video Features

Integra DRX-5.2 supports 4K passthrough up to 60p and Onkyo TX-NR5010 supports 1080p passthrough. Onkyo TX-NR5010 can do 4K upscaling up to 30p. Integra DRX-5.2 supports HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Integra DRX-5.2 supports Dolby Atmos with its Dolby Surround upmixer. It can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Integra DRX-5.2 supports DTS:X. It can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Toroidal Transformer

Onkyo TX-NR5010 has a toroidal transformer which in general costs several times more than a regular C-core transformer and radiates less electromagnetic noise outside its donut shaped core.


WRAT

Onkyo TX-NR5010 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.


3-Stage Inverted Darlington Circuitry

Onkyo TX-NR5010 features 3-Stage Inverted Darlington Circuitry. Standard amplifiers employ a negative feedback (NFB) design that counters distortion by feeding back the opposite phase of the output signal into the input stage. Unfortunately, NFB is easily affected by inverse electromotive forces from the speakers, leading to an increase in circuit noise. Three-Stage Inverted Darlington Circuitry is a core Onkyo technology incorporating a low-NFB design that makes the sound more natural. Sensitive to oscillations, this circuitry requires very advanced control technology in order to be incorporated into the amplifier.


THX™ Certification

Integra DRX-5.2 and Onkyo TX-NR5010 are THX™ certified which offers optimal performance, superior quality and seamless integration. THX works with partners from the ground up, so that certified products deliver professional quality audio-visual experiences right out of the box. They only certify the very best products with uncompromised quality, performance and consistency. They ensure that THX certified devices play well with lower performing devices and components. THX listening modes make the receiver to have one speaker set up for movies, music and games. They are tested for power output, bass management, signal-to-noise ratio and feature RE-EQ, timbre matching, boundary gain compensation and THX Loudness Plus.


Advanced Music Optimizer

Compressed music enhancement in Integra DRX-5.2 and Onkyo TX-NR5010 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.


Connectivity


Integra DRX-5.2

Integra DRX-5.2 can be connected to internet using ethernet cable. The Receiver works with SONOS and supports[y] Airplay. It has 7 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 (shared with Zone 3 Line/Pre Out) channel analog pre-outs for external amplification.

Front panel has HDMI input.

Image cannot be found Image cannot be found

Onkyo TX-NR5010

Onkyo TX-NR5010 can be connected to internet using ethernet cable or wirelessly[y] via Front USB (optional UWF-1 sold separately). It can also connect to bluetooth devices[y] via Front USB (optional UBT-1 adapter sold separately) . It has 9 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.4 channel analog pre-outs for external amplification.

Front panel has HDMI/MHL, USB, Composite Video, RCA Audio and Optical inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Integra DRX-5.2 and here - Onkyo TX-NR5010.

BASICS Integra DRX-5.2 Onkyo TX-NR5010
BrandIntegraOnkyo
ModelDRX-5.2TX-NR5010
TypeA/V ReceiverA/V Receiver
CountryAustralia and AsiaEurope
Release Year20182012
AMPLIFIER Integra DRX-5.2 Onkyo TX-NR5010
Channels9.29.2
Front Wide Channel Support
VLSC (Vector Linear Shaping Circuitry) Front L/R All Channels
THX™ Certification Select™ (previously known as Select2) Ultra2 Plus
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry 2-Stage
PUSH-PULL Design
Bi-amp Capability Front L/R Channels
AUDIO Integra DRX-5.2 Onkyo TX-NR5010
Digital Signal Processing (DSP) Engine32-Bit DSP Chip for Advanced ProcessingAdvanced 32-Bit Processing DSP Chip
DACAKM AK4458Burr-Brown
Maximum Channel Processing11.111.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic PLIIz
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo Neo:X
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBFLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHDFLAC, WAV, Apple Lossless, WMA, WMA Lossless, Ogg, MP3, DSD, Dolby TruHD, LPCM, AAC
High Resolution Music Playback via USB and/or Network up to 192 kHz up to 192 kHz
High Resolution Audio Formats via USBFLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHDFLAC, WAV, Apple Lossless, DSD, WMA Lossless, LPCM, AAC, Dolby TrueHD
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD via USB 2-ch Input 2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology
DTS Dialog Control
Dialog Enhancement
Dialog Normalization
Dialogue Lift Screen Centered Dialog
Tone Control All Channels All Channels
Compressed Music Enhancer Advanced Music Optimizer Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Virtual Speakers T-D (Theater-Dimensional) T-D (Theater-Dimensional)
Independent Dual Subwoofer Output
CALIBRATION Integra DRX-5.2 Onkyo TX-NR5010
Auto Speaker Calibration System with Mic. AccuEQ Advance with AccuReflex™ Audyssey MultEQ XT32
VIDEO Integra DRX-5.2 Onkyo TX-NR5010
HDR10
HDR10+
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode Pass-through
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 1080p
Analog To HDMI Upconversion Component**, Composite Component, Composite, PC
Component Video Upscaling *
Analog to Analog Video conversion Composite, PC
Component Video Maximum Resolution480i/576i1080p
isf Certified Calibration Control
CONNECTIVITY Integra DRX-5.2 Onkyo TX-NR5010
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay Airplay
Apple Product Connection iPod, iPhone and iPad iPod and iPhone via front USB
Remote App Integra Control Pro iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi via Front USB (optional UWF-1 sold separately)
Bluetooth via Front USB (optional UBT-1 adapter sold separately)
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Enhanced ARC
HDCP Version2.22.2
HDMI Input7 (1 front)9 (1 front)
HDMI Output2 (1 Main, 1 Sub/Zone2)2 (1 Main, 1 Sub/Zone2)
USB Input1 (Rear)1 Front (for iPod/iPhone) and 1 Rear
USB DC Out Port
Analog Audio Line Input67 (1 front)
Analog Audio Line Output
Phono Input
Optical In24 (1 front)
Optical Out
Coaxial In/Out1 / 3 /
Composite Video Input25 (1 front)
Composite Video Output 1
S-Video Input
S-Video Output
Component Video Input22
Component Video Output 1
PC In
Multi-Channel Input
Analog Pre-Outs11.2 (shared with Zone 3 Line/Pre Out)11.4
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMIHDMI/MHL, USB, Composite Video, RCA Audio, Optical
Headphone Out 6.3 mm 6.3 mm
ZONES Integra DRX-5.2 Onkyo TX-NR5010
Zones33
Powered Zones 2 and 3 2 and 3
Zone 2HDMI, RCA Pre/Line OutHDMI, Composite Video, RCA Line Out
Zone 3 OutsRCA Pre/Line OutRCA Line Out
Whole House Mode
RS-232
+12V Trigger Output3 (A:100 mA, B:25 mA, C:25 mA)2 (Zone2, Zone 3)
Remote (IR) Input/Output2 / 11 / 1
MISC Integra DRX-5.2 Onkyo TX-NR5010
On-Screen Display Advanced "Home" GUI
Detachable Power Cord Oversized AC Cord
RIHD (Remote Interactive Over HDMI)
Smart Grid-Ready
RADIO Integra DRX-5.2 Onkyo TX-NR5010
Analog Tuner FM/AM with RDS FM/AM with RDS
Presets4040
Digital Radio
Internet Radio TuneIn vTuner
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION Integra DRX-5.2 Onkyo TX-NR5010
Solid Aluminum Front
Speaker Terminals1111
Large Speaker Terminals1111
Color-Coded Speaker Terminals
Gold plated RCA terminals
POWER Integra DRX-5.2 Onkyo TX-NR5010
Power SupplyAC 220-230 V, 50/60 HzAC 220-240 V, 50/60 Hz
Independent Power Supply24
H.C.P.S. (High Current Power Supply) Massive High Power Transformer Massive High Power Toroidal Transformer
Toroidal Transformer
Power Consumption870 W1160 W
Standby Power0.15 W0.15 W
GENERAL Integra DRX-5.2 Onkyo TX-NR5010
ECO Mode / Hybrid Standby Function
Dimensions (W x H x D)435 mm x 198 mm x 388.5 mm
17-1/8" x 7-13/16" x 15-5/16"
435 mm x 198.5 mm x 463.5 mm
17-1/8" x 7-13/16" x 18-1/4"
Weight14.0 kg (30.9 lbs)25.0 kg (55.1 lbs)
Warranty3 Years2 Years
SPECS Integra DRX-5.2 Onkyo TX-NR5010
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)215 W (10% THD)280 W
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)180 W (1% THD)220 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)250 W400 W
Dynamic Power per Channel (4 Ω, Front)220 W300 W
Dynamic Power per Channel (8 Ω, Front)130 W180 W
THD0.08% (20 Hz - 20 kHz, half power)0.05% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance (Line)200 mV/47 kΩ (Line)200 mV/47 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)3.5 mV/47 kΩ2.5 mV/47 kΩ
Rated Preout Level and Impedance1 V/470 Ω1 V/470 Ω
Phono Overload70 mV (MM, 1 kHz 0.5%)70 mV (MM 1 kHz 0.5% Direct)
S/N Ratio (Line, IHF-A)106 dB110 dB
S/N Ratio (Phono MM, IHF-A)80 dB80 dB
Frequency Response (Analog In)5 Hz - 100 kHz/+1 dB, -3 dB (Direct)5 Hz - 100 kHz/+1 dB, -3 dB (Direct Mode)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
DSD Sampling Rates via USB2.8 MHz, 5.6 MHz, 11.2 MHz2.8 MHz
Video Input Sensitivity/Output Level and Impedance1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
Ethernet Standard10BASE-T/100BASE-TX100BASE-TX
FM Frequency87.5 MHz - 108.0 MHz87.5 MHz - 108.0 MHz
AM Frequency522/530 kHz - 1611/1710 kHz522/530 kHz - 1611/1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.