Integra DRX-4.2 vs Onkyo TX-NR696 Detailed Comparison
image not found
SCORE:
91
SCORE:
87

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Integra DRX-4.2 to Onkyo TX-NR696 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Integra DRX-4.2 has 9 channel and the Onkyo TX-NR696 has 7 channel amplifiers.

Let us have a look at some highlights of the models.

Integra DRX-4.2 Highlights

Onkyo TX-NR696 Highlights

  • 9.2 channels
  • 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • THX Select™ certified
  • Dolby Atmos, DTS:X capable
  • HDR10, Dolby Vision, 4K Passthrough
  • Airplay, Chromecast, DTS Play-Fi
  • Ethernet
  • USB and Phono inputs
  • 7.2 channels
  • 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • THX Select™ certified
  • Dolby Atmos, DTS:X capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay 2, Chromecast, DTS Play-Fi
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs

We have evaluated both receivers. Integra DRX-4.2 gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Integra DRX-4.2

Onkyo TX-NR696

AMPLIFIER
91
VIDEO FEATURES
95
AUDIO FEATURES
89
CONNECTIVITY
84
MULTIZONE
93
MISCELLANEOUS
89
RADIO
92
OVERALL
91
AMPLIFIER
89
VIDEO FEATURES
94
AUDIO FEATURES
89
CONNECTIVITY
86
MULTIZONE
81
MISCELLANEOUS
62
RADIO
90
OVERALL
87

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Integra DRX-4.2

This section shows those features and specifications which are the reason to choose Integra DRX-4.2 over Onkyo TX-NR696.

Integra DRX-4.2 has more channels, more channel processing, more advanced room correction system, more analog pre-outs, more zones and bigger power supply. It supports Pandora.

Integra DRX-4.2 Onkyo TX-NR696
More Channels 9.2 7.2
THX™ Certification Select™ (previously known as Select2) Select™ (previously known as Select2)
More Channel Processing 11.1 7.1
More Tone Control Channels All Channels Front L/R Channels
More Advanced Auto Speaker Calibration System AccuEQ Advance with AccuReflex™ AccuEQ with subwoofer EQ and AccuReflex™
Analog To HDMI Upconversion Component**, Composite
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
More Analog Audio Line Inputs 6 5 (1 Front)
More Optical Inputs 2 1
More Composite Video Inputs 2
More Component Video Inputs 2
More Analog Pre-Outs 11.2 (shared with Zone 3 Line/Pre Out) 2.2 (shared with Zone 2/Zone B)
More Zones 3 2
More Powered Zones 2 and 3 2
Whole House Mode
RS-232 Interface
+12V Trigger Output 3 (A:100 mA, B:25 mA, C:25 mA) 0
Remote (IR) Input/Output 2 / 1 0 / 0
Pandora
Solid Aluminum Front
More Speaker Terminals 11 7
More Large Speaker Terminals 11 7
Gold plated RCA terminals
Independent Power Supply 2
Bigger Power Supply 750 W 570 W
Longer Warranty 3 Years 2 Years
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 225 W (10% THD) 175 W (10% THD)
Higher Dynamic Power per Channel, 3 Ω, Front) 250 W 240 W
Higher Dynamic Power per Channel, 4 Ω, Front) 220 W 210 W
Higher Dynamic Power per Channel, 8 Ω, Front) 130 W 120 W
Higher Rated Headphone Power Output 85 mW (32 Ω, 1 kHz, 10% THD) 80 mW (32 Ω, 1 kHz, 10% THD)

Advantage of Onkyo TX-NR696

This section shows those features and specifications which are the reason to choose Integra DRX-4.2 over Onkyo TX-NR696.

Integra DRX-4.2 has more channels, more channel processing, more advanced room correction system, more analog pre-outs, more zones and bigger power supply. It supports Pandora.

Integra DRX-4.2 Onkyo TX-NR696
Dolby Atmos Height Virtualization
DTS Virtual:X via future firmware update
Pure Audio Mode
AirPlay Airplay AirPlay 2
Wi-Fi
Bluetooth SBC, AAC
Newer HDCP Version 2.2 2.3 (via future firmware update)
Front A/V Inputs HDMI HDMI, Mini-Jack
Analog Tuner FM/AM FM/AM with RDS
Wider AM Frequency Range 530 kHz - 1710 kHz 522/530 kHz - 1611/1710 kHz

Common Strengths and Weaknesses

Here we list common strengths and weaknesses of both receivers.

STRENGTHS
THX™ Certification 👍
Certified 4 Ω Performance 👍
Bi-amp Capability 👍
Dolby Atmos 👍
Dolby TrueHD 👍
Dolby Digital Plus 👍
Dolby Surround Upmixer 👍
THX Listening Modes 👍
DTS:X 👍
DTS Neural:X 👍
DTS-HD Master Audio 👍
DTS-HD High Resolution Audio 👍
DTS 96/24 👍
DTS Express 👍
DTS-ES 👍
High Resolution Music Playback via USB and/or Network 👍
Gapless Playback 👍
DSD via HDMI 👍
DSD via USB 👍
DTS Dialog Control 👍
Dialog Normalization 👍
Compressed Music Enhancer 👍
THX Processing Mode 👍
Auto Speaker Calibration System with Mic. 👍
HDR10 👍
BT.2020 color space 👍
Dolby Vision 👍
HLG 👍
3-D Ready 👍
4K or 8K Video Passthrough 👍
FlareConnect 👍
Chromecast Built-In 👍
DTS Play-Fi 👍
Works with SONOS 👍
Ethernet 👍
New HDCP Version 👍
Many HDMI Inputs 👍
USB Input 👍
Phono Input 👍
Analog Pre-Outs 👍
Zones 👍
Detachable Power Cord 👍
Analog Tuner 👍
Spotify 👍
Tidal 👍
Deezer 👍
H.C.P.S. (High Current Power Supply) 👍
WEAKNESSES
No Front Wide Channel Support 👎
No IMAX Enhanced 👎
No Auro 3D with Auro-Matic Upmixer 👎
No High-resolution Music Enhancer 👎
No HDR10+ 👎
Does not Work with Amazon Alexa 👎
No eARC 👎
No Multi-Channel Input 👎
No Napster 👎
No SiriusXM Internet Radio 👎

Selected Features

Amplifier

Integra DRX-4.2 has 9 channel and Onkyo TX-NR696 has 7 channel amplifiers. They both deliver 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and have stable performance at 4 Ω load. Since 2016 all receiver manufacturers have dropped front wide channel support and these models are no exceptions.


Video Features

Both receivers support 4K passthrough up to 60p. Onkyo TX-NR696 can do 4K upscaling. The receivers support HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Integra DRX-4.2 and Onkyo TX-NR696 support Dolby Atmos with its Dolby Surround upmixer. The Integra DRX-4.2 can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier and the Onkyo TX-NR696 can be configured upto 5.1.2 channels using internal amplifiers.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Integra DRX-4.2 and Onkyo TX-NR696 support DTS:X with its Neural:X upmixer. The Integra DRX-4.2 can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier. The Onkyo TX-NR696 can be configured upto 5.1.2 channels using internal amplifiers.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Dynamic Audio Amplification

Onkyo TX-NR696 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.


WRAT

Onkyo TX-NR696 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.


THX™ Certification

Integra DRX-4.2 and Onkyo TX-NR696 are THX™ certified which offers optimal performance, superior quality and seamless integration. THX works with partners from the ground up, so that certified products deliver professional quality audio-visual experiences right out of the box. They only certify the very best products with uncompromised quality, performance and consistency. They ensure that THX certified devices play well with lower performing devices and components. THX listening modes make the receiver to have one speaker set up for movies, music and games. They are tested for power output, bass management, signal-to-noise ratio and feature RE-EQ, timbre matching, boundary gain compensation and THX Loudness Plus.


Advanced Music Optimizer

Compressed music enhancement in Integra DRX-4.2 and Onkyo TX-NR696 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.


Phase-Matching Bass Boost

Onkyo TX-NR696 features Phase-Matching Bass Boost. The negative effects of phase-shift or the timing difference between sound waves of different frequencies can sometimes be heard in audio players when corners are cut in order to increase bass response. While most audio systems have some form of low-frequency enhancement system, often a bigger bass sound comes at the expense of mid-range clarity, and results in a smeared or muddy sound. Onkyo’s Phase-Matching Bass Boost technology avoids this problem by improving the phase timing to preserve the natural clarity of the mid-range allowing vocals and strings to shine while maintaining a smooth, powerful bass response at all volume levels.


Connectivity


Integra DRX-4.2

Integra DRX-4.2 can be connected to internet using ethernet cable. The Receiver works with SONOS and supports[y] Airplay. It has 7 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 (shared with Zone 3 Line/Pre Out) channel analog pre-outs for external amplification.

Front panel has HDMI input.

Image cannot be found Image cannot be found

Onkyo TX-NR696

Onkyo TX-NR696 can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with SONOS and supports[y] AirPlay 2. It has 7 HDMI inputs with HDCP 2.3 (via future firmware update) copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 2.2 (shared with Zone 2/Zone B) channel analog pre-outs for external amplification.

Front panel has HDMI and Mini-Jack inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Integra DRX-4.2 and here - Onkyo TX-NR696.

BASICS Integra DRX-4.2 Onkyo TX-NR696
BrandIntegraOnkyo
ModelDRX-4.2TX-NR696
TypeA/V ReceiverA/V Receiver
CountryNorth AmericaEurope
Release Year20182019
AMPLIFIER Integra DRX-4.2 Onkyo TX-NR696
Channels9.27.2
Front Wide Channel Support
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry) Front L/R Front L/R channels
THX™ Certification Select™ (previously known as Select2) Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry 2-Stage
Bi-amp Capability Front L/R Channels
AUDIO Integra DRX-4.2 Onkyo TX-NR696
Digital Signal Processing (DSP) Engine32-Bit DSP Chip for Advanced Processing32-bit Digital Signal Processing Engines
DACAKM AK4458AKM AK4458
Maximum Channel Processing11.17.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
DTS:X
DTS Neural:X
DTS Virtual:X via future firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBFLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHDFLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network up to 192 kHz up to 192 kHz
High Resolution Audio Formats via USBFLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHDFLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD via USB 2-ch Input 2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialog Control
Dialog Enhancement
Dialog Normalization
Dialogue Lift
Tone Control All Channels Front L/R Channels
Compressed Music Enhancer Advanced Music Optimizer Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Virtual Speakers T-D (Theater-Dimensional) T-D (Theater-Dimensional)
CALIBRATION Integra DRX-4.2 Onkyo TX-NR696
Auto Speaker Calibration System with Mic. AccuEQ Advance with AccuReflex™ AccuEQ with subwoofer EQ and AccuReflex™
VIDEO Integra DRX-4.2 Onkyo TX-NR696
HDR10
HDR10+
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode Pass-through
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 4K/60p (RGB/YCbCr4:4:4)
Analog To HDMI Upconversion Component**, Composite
isf Certified Calibration Control
CONNECTIVITY Integra DRX-4.2 Onkyo TX-NR696
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay Airplay AirPlay 2
Apple Product Connection iPod, iPhone and iPad iPod, iPhone and iPad
Remote App Integra Control ProOnkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi
Bluetooth SBC, AAC
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Enhanced ARC
HDCP Version2.22.3 (via future firmware update)
HDMI Input7 (1 front)7 (1 front)
HDMI Output2 (1 Main, 1 Sub/Zone2)2 (1 Main, 1 Sub/Zone2)
USB Input1 (Rear)1 (Rear)
USB DC Out Port
Analog Audio Line Input65 (1 Front)
Analog Audio Line Output
Phono Input
Optical In21
Optical Out
Coaxial In/Out1 / 1 /
Composite Video Input2
Composite Video Output
S-Video Input
S-Video Output
Component Video Input2
Component Video Output
PC In
Multi-Channel Input
Analog Pre-Outs11.2 (shared with Zone 3 Line/Pre Out)2.2 (shared with Zone 2/Zone B)
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMIHDMI, Mini-Jack
Headphone Out 6.3 mm 6.3 mm
ZONES Integra DRX-4.2 Onkyo TX-NR696
Zones32
Powered Zones 2 and 3 2
Zone 2HDMI, RCA Pre/Line OutHDMI, RCA Line Out (shared with Zone B)
Whole House Mode
RS-232
+12V Trigger Output3 (A:100 mA, B:25 mA, C:25 mA)0
Remote (IR) Input/Output2 / 10 / 0
MISC Integra DRX-4.2 Onkyo TX-NR696
On-Screen Display Graphical Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up
GUI Languages99
Detachable Power Cord Oversized AC Cord
RIHD (Remote Interactive Over HDMI)
Smart Grid-Ready
RADIO Integra DRX-4.2 Onkyo TX-NR696
Analog Tuner FM/AM FM/AM with RDS
Presets4040
Digital Radio
Internet Radio TuneIn TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION Integra DRX-4.2 Onkyo TX-NR696
Solid Aluminum Front
Speaker Terminals117
Large Speaker Terminals117
Color-Coded Speaker Terminals
Gold plated RCA terminals
POWER Integra DRX-4.2 Onkyo TX-NR696
Power SupplyAC 120 V, 60 HzAC 220-240 V, 50/60 Hz
Independent Power Supply2
H.C.P.S. (High Current Power Supply) Massive High Power Transformer Customized Transformer
Toroidal Transformer
Power Consumption750 W570 W
Standby Power0.15 W0.15 W
GENERAL Integra DRX-4.2 Onkyo TX-NR696
ECO Mode / Hybrid Standby Function
Dimensions (W x H x D)435 mm x 174 mm x 376.5 mm
17-1/8" x 6-7/8" x 14-13/16"
435 mm x 173.5 mm x 379.5 mm
17-1/8" x 6-13/16" x 14-15/16"
Dimensions of Package (W x H x D)570 mm x 298 mm x 469 mm
22-7/16" x 11-3/4" x 18-7/16"
534 mm x 265 mm x 468 mm
21" x 10-7/16" x 18-7/16"
Weight11.2 kg (24.7 lbs)10.0 kg (22.0 lbs)
Weight of Package14.0 kg (30.9 lbs)12.5 kg (27.6 lbs)
Warranty3 Years2 Years
SPECS Integra DRX-4.2 Onkyo TX-NR696
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)225 W (10% THD)175 W (10% THD)
Dynamic Power per Channel (3 Ω, Front)250 W240 W
Dynamic Power per Channel (4 Ω, Front)220 W210 W
Dynamic Power per Channel (8 Ω, Front)130 W120 W
THD0.08% (20 Hz - 20 kHz, half power)0.08% (20 Hz - 20 kHz, Half power)
Input Sensitivity and Impedance (Line)200 mV/47 kΩ (Line)200 mV/47 kΩ (1 kHz, 100 W/8 Ω)
Input Sensitivity and Impedance (Phono MM)3.5 mV/47 kΩ3.5 mV/47 kΩ
Rated Preout Level and Impedance1 V/470 Ω1 V/470 Ω
Rated Headphone Power Output85 mW (32 Ω, 1 kHz, 10% THD)80 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload70 mV (MM, 1 kHz 0.5%)70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)106 dB106 dB
S/N Ratio (Phono MM, IHF-A)80 dB80 dB
Frequency Response (Analog In)5 Hz - 100 kHz/+1 dB, -3 dB (Direct)10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
DSD Sampling Rates via USB2.8 MHz, 5.6 MHz, 11.2 MHz2.8 MHz, 5.6 MHz, 11.2 MHz
Ethernet Standard10BASE-T/100BASE-TX10BASE-T/100BASE-TX
USB TerminalVer. 2.0, 5 V, 1 AVer. 2.0, 5 V, 1 A
FM Frequency87.5 MHz - 107.9 MHz87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)Mono: 1.56 µV (15.0 dBf)Mono: 1.0 µV (11.2 dBf)
AM Frequency530 kHz - 1710 kHz522/530 kHz - 1611/1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.