Denon AVR-X6300H vs Yamaha RX-A1010 Detailed Comparison
SCORE:
74
SCORE:
44

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Denon AVR-X6300H to Yamaha Aventage RX-A1010 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X6300H has 11 channel and the Yamaha Aventage RX-A1010 has 7 channel amplifiers with Denon AVR-X6300H's being more powerful.

Let us have a look at some highlights of the models.

Denon AVR-X6300H Highlights

Yamaha Aventage RX-A1010 Highlights

  • 11.2 channels
  • 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • Dolby Atmos, DTS:X, Auro 3D capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay 2, DLNA, HEOS
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs
  • 7.2 channels
  • 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • 1080p Upscaling, 1080p Passthrough
  • DLNA
  • Ethernet, Bluetooth
  • USB and Phono inputs

We have evaluated both receivers. Denon AVR-X6300H gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Denon AVR-X6300H

Yamaha Aventage RX-A1010

AMPLIFIER
79
VIDEO FEATURES
78
AUDIO FEATURES
67
CONNECTIVITY
64
MULTIZONE
75
MISCELLANEOUS
72
RADIO
93
OVERALL
74
AMPLIFIER
70
VIDEO FEATURES
11
AUDIO FEATURES
24
CONNECTIVITY
58
MULTIZONE
53
MISCELLANEOUS
38
RADIO
63
OVERALL
44

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Denon AVR-X6300H over Yamaha Aventage RX-A1010

This section shows those features and specifications which are the reason to choose Denon AVR-X6300H over Yamaha Aventage RX-A1010.

Denon AVR-X6300H has more channels, more power per channel, more channel processing, more analog pre-outs, more zones, bigger power supply and higher signal to noise ratio. It supports Dolby Atmos, DTS:X, Auro3D, gapless playback, Amazon Alexa, Spotify, Tidal and Deezer. It has DTS Dialog Control. In video department only Denon AVR-X6300H supports HDR10, Dolby Vision and Hybrid Log Gamma.

Denon AVR-X6300H Yamaha Aventage RX-A1010
More Channels 11.2 7.2
More Channel Processing 11.2 7.1
Dolby Atmos up to 7.1.4
Dolby Surround Upmixer
DTS:X up to 7.1.4
DTS Neural:X
Auro 3D with Auro-Matic Upmixer
Music Playback via USB MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD MP3, WMA, AAC, WAV, FLAC
Higher Resolution Music Playback via USB up to 192 kHz up to 96 kHz
High Resolution Audio Formats via USB Apple Lossless, WAV, FLAC, AIFF, DSD WAV, FLAC
Gapless Playback
DTS Dialog Control
Dialog Level Adjustment
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
HDR10
BT.2020 color space
Dolby Vision
HLG
Auto Low Latency Mode Pass-through
Video Signal Passthrough up to 4K 50/60Hz 4:4:4 up to 1080p
Video Signal Upscaling up to 4K 50/60Hz 4:4:4 up to 1080p *
Component Video Maximum Resolution 1080p 1080i
isf Certified Calibration Control
Works with Amazon Alexa
AirPlay AirPlay 2
Wi-Fi
Bluetooth SBC, AAC via optional YBA-10 adapter (sold separately)
More HDMI Outputs 3 (2 for MAIN, 1 for ZONE2) 2
More Analog Pre-Outs 11.2 7.2
Speaker A/B assignable
More Zones 3 2
More Powered Zones 2 and 3 Zone 2
Zone 2 Outs HDMI, Component, Composite, Pre Out Component, S-Video, Composite, Pre Out
Spotify
Tidal
Deezer
More Speaker Terminals 11 9
More Large Speaker Terminals 11 9
Color-Coded Speaker Terminals
Gold plated RCA terminals
Bigger Power Supply 750 W 490 W/620 VA
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) 140 W (0.05% THD) 110 W (0.06% THD)
Higher Dynamic Power per Channel, 4 Ω, Front) 250 W x 2-channel 210 W
Higher Dynamic Power per Channel, 8 Ω, Front) 160 W x 2-channel 135 W
Higher S/N Ratio (Line, IHF-A) 102 dB 100 dB
Higher FM S/N Ratio Mono/Stereo/HD: 78 dB/68 dB/85 dB HD: 80 dB, Mono/Stereo: 72 dB/ 70 dB
Lower FM Harmonic Distortion (IHF, 1 kHz) Mono/Stereo/HD: 0.1%/0.2%/0.02% HD: 0.03%, Mono/Stereo: 0.3%/0.5%

Advantage of Yamaha Aventage RX-A1010 over Denon AVR-X6300H

This section shows those features and specifications which are the reason to choose Yamaha Aventage RX-A1010 over Denon AVR-X6300H.

Only Yamaha Aventage RX-A1010 has analog multi-channel input.

Denon AVR-X6300H Yamaha Aventage RX-A1010
Dolby Pro Logic PLIIx
DTS Neo Neo:6
Dialogue Lift
Analog to Analog Video conversion (Component**, S-Video, Composite) to (Component, S-Video, Composite)
More Analog Audio Line Inputs 7 (1 front) 9 (1 front)
More Analog Audio Line Outputs 1
More Optical Inputs 2 4 (1 front)
More Optical Outputs 1
More Coaxial Inputs/Outputs 2 / No 3 / No
More Composite Video Outputs 1 2
More S-Video Inputs 5 (1 front)
More S-Video Outputs 2
More Component Video Inputs 2 4
Multi-Channel Input 7.1
Front A/V Inputs HDMI, USB, Composite, L/R Audio HDMI, USB, Analog Audio, Optical, Composite and S-video
Higher S/N Ratio (Phono MM, IHF-A) 74 dB 86 dB

Common Strengths of Denon AVR-X6300H and Yamaha Aventage RX-A1010

Denon AVR-X6300H and Yamaha Aventage RX-A1010 share common strengths such as DLNA 1.5 support, ethernet connection, bluetooth, phono input, analog pre-outs, internet radio, Pandora and SiriusXM.

STRENGTHS Denon AVR-X6300H Yamaha Aventage RX-A1010
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DLNA 1.5
Ethernet
Bluetooth SBC, AAC via optional YBA-10 adapter (sold separately)
Many HDMI Inputs 8 (1 front) 8 (1 front)
USB Input 1 (Front) for iPod/iPhone and USB memory iPod/iPhone, USB Memory, Portable Audio Player
Many Analog Audio Line Inputs 7 (1 front) 9 (1 front)
Phono Input
Composite Video Inputs 5 (1 front) 5 (1 front)
Component Video Inputs 2 4
Analog Pre-Outs 11.2 7.2
Zones 3 2
Analog Tuner FM/AM FM/AM
Internet Radio vTuner vTuner
Pandora
SiriusXM Internet Radio

Common Weaknesses of Denon AVR-X6300H and Yamaha Aventage RX-A1010

Denon AVR-X6300H and Yamaha Aventage RX-A1010 share common weaknesses such as no front wide channel support, no MHL input, no ChromeCast, no DTS Play-Fi and no SONOS.

WEAKNESSES Denon AVR-X6300H Yamaha Aventage RX-A1010
No Front Wide Channel Support
No Dolby Atmos Height Virtualization
No DTS Virtual:X
No IMAX Enhanced
No HDR10+
No Dynamic HDR
No VRR
No QFT
No MHL Input
No FireConnect
No FlareConnect
No Chromecast Built-In
No DTS Play-Fi
Does Not Work with SONOS
No eARC

Selected Features

Amplifier

Denon AVR-X6300H has 11 channel and Yamaha Aventage RX-A1010 has 7 channel amplifiers. Denon AVR-X6300H delivers 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Yamaha Aventage RX-A1010 delivers 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load.


Video Features

Denon AVR-X6300H supports 4K passthrough up to 60p and Yamaha Aventage RX-A1010 supports 1080p passthrough. Denon AVR-X6300H can do 4K upscaling up to 60p and Yamaha Aventage RX-A1010 can do 1080p upscaling. Denon AVR-X6300H supports HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Denon AVR-X6300H supports Dolby Atmos with its Dolby Surround upmixer. It can be configured upto 7.1.4 channels using internal amplifiers.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Denon AVR-X6300H supports DTS:X. It can be configured upto 7.1.4 channels using internal amplifiers.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Auro-3D with its Auro-Matic upmixer

Denon AVR-X6300H supports Auro-3D and its Auro-Matic upmixer via charged firmware upgrade. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.


Adaptive DRC

Yamaha Aventage RX-A1010 features Adaptive DRC (Dynamic Range Control) which automatically adjusts the dynamic range of the sound according to the volume level. This ensures that you hear clear dialog and vocals, and all sound effects at comfortable levels. There is no need to adjust the volume level as you listen; everything from whispers to big explosions will be heard clearly and comfortably at the same volume setting. It also tones down loud TV commercials, and is ideal for low-volume, late-night listening, when you do not want to disturb others.


D.D.S.C.

Denon AVR-X6300H has D.D.S.C (Dynamic Discrete Surround Circuit). A single IC chip is generally used in processing A/D, DSP, and D/A conversions that are vital to sound quality. The D.D.S.C. uses separate components to process the important sections of the A/D, DSP, and D/A conversions and therefore significantly improves signal processing capability and performance. In addition, the approach of developing and incorporating high-quality dedicated elements in the sections that configure the circuitry makes it easier to develop a high-grade, advanced surround circuit compared with the method where all processing is concentrated within a single chip. Denon’s proprietary digital audio technology that had for many years been developed for pure Hi-Fi components is now also alive in each block of the D.D.S.C.


Connectivity


Denon AVR-X6300H

Denon AVR-X6300H can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

Image cannot be found Image cannot be found

Yamaha Aventage RX-A1010

Yamaha Aventage RX-A1010 can be connected to internet using ethernet cable. It can also connect to bluetooth devices via optional YBA-10 adapter (sold separately). It has 8 HDMI inputs. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 7.1 multi-channel analog inputs and 7.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Analog Audio, Optical and Composite and S-video inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Denon AVR-X6300H and here - Yamaha Aventage RX-A1010.

BASICS Denon AVR-X6300H Yamaha Aventage RX-A1010
BrandDenonYamaha
ModelAVR-X6300HRX-A1010
TypeA/V ReceiverA/V Receiver
CountryUSAUSA
Release Year20162011
AMPLIFIER Denon AVR-X6300H Yamaha Aventage RX-A1010
Channels11.27.2
Front Wide Channel Support
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability assignable
AUDIO Denon AVR-X6300H Yamaha Aventage RX-A1010
Maximum Channel Processing11.27.1
Air Studios Monitor Certification
Dolby Atmos up to 7.1.4
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic PLIIx
Dolby Digital EX
DTS:X up to 7.1.4
DTS Neural:X
DTS Virtual:X
DTS Neo Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES Discrete 6.1, Matrix 6.1 Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBMP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSDMP3, WMA, AAC, WAV, FLAC
High Resolution Music Playback via USB and/or Network up to 192 kHz up to 96 kHz
High Resolution Audio Formats via USBApple Lossless, WAV, FLAC, AIFF, DSDWAV, FLAC
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD to PCM Converter
USB DAC
DTS Dialogue Control
Dialog Level Adjustment
Dialog Normalization
Dialogue Lift
Compressed Music Enhancer
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Pure Direct Mode
CALIBRATION Denon AVR-X6300H Yamaha Aventage RX-A1010
Auto Speaker Calibration System with Mic. Audyssey MultEQ XT32 YPAO sound optimization with Multipoint measurement
VIDEO Denon AVR-X6300H Yamaha Aventage RX-A1010
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode (ALLM)
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 1080p
Video Signal Upscaling up to 4K 50/60Hz 4:4:4 up to 1080p *
Analog To HDMI Upconversion Component, Composite Component****, S-Video, Composite
Component Video Upscaling
Analog to Analog Video conversion (Component**, S-Video, Composite) to (Component, S-Video, Composite)
Component Video Maximum Resolution1080p1080i
isf Certified Calibration Control
CONNECTIVITY Denon AVR-X6300H Yamaha Aventage RX-A1010
MHL Input
DLNA 1.5
FireConnect
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay AirPlay 2
Apple Product Connection iPod, iPhone and iPad iPod and iPhone via front USB, YDS-12 Dock (sold separately) or YID-W100 Wireless Dock (sold separately)
Remote App Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi
Bluetooth SBC, AAC via optional YBA-10 adapter (sold separately)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDMI Inputs8 (1 front)8 (1 front)
HDMI Outputs3 (2 for MAIN, 1 for ZONE2)2
USB Input1 (Front) for iPod/iPhone and USB memoryiPod/iPhone, USB Memory, Portable Audio Player
USB DC Out Port
Analog Audio Line Inputs7 (1 front)9 (1 front)
Analog Audio Line Outputs1
Phono Input
Optical Inputs24 (1 front)
Optical Outputs1
Coaxial Inputs/Outputs2 / No3 / No
Composite Video Inputs5 (1 front)5 (1 front)
Composite Video Outputs12
S-Video Inputs5 (1 front)
S-Video Outputs2
Component Video Inputs24
Component Video Outputs11
PC In
Multi-Channel Input 7.1
Analog Pre-Outs11.27.2
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMI, USB, Composite, L/R AudioHDMI, USB, Analog Audio, Optical, Composite and S-video
Speaker A/B assignable
Headphone Out 6.3 mm 6.3 mm
ZONES Denon AVR-X6300H Yamaha Aventage RX-A1010
Zones32
Powered Zones 2 and 3Zone 2
Zone 2 OutsHDMI, Component, Composite, Pre OutComponent, S-Video, Composite, Pre Out
RS-232 Interface
+12V Trigger Output22
Remote (IR) Input/Output1 / 11 / 1
MISC Denon AVR-X6300H Yamaha Aventage RX-A1010
On-Screen Display Advanced Graphic User InterfaceAdvanced Graphical User Interface with Status
Remote ControllerRC-1211 (Preset)
Detachable Power Cord
RADIO Denon AVR-X6300H Yamaha Aventage RX-A1010
Analog Tuner FM/AM FM/AM
Digital Radio HD Radio HD Radio with iTunes Tagging
Internet Radio vTuner vTuner
Pandora
Spotify
Tidal
Deezer
SiriusXM Internet Radio
CONSTRUCTION Denon AVR-X6300H Yamaha Aventage RX-A1010
Speaker Terminals119
Large Speaker Terminals119
Color-Coded Speaker Terminals
Gold plated RCA terminals
POWER Denon AVR-X6300H Yamaha Aventage RX-A1010
Power SupplyAC 120 V, 60 HzAC 120 V, 60 Hz
Power Consumption750 W490 W/620 VA
Standby Power0.1 W0.3 W
GENERAL Denon AVR-X6300H Yamaha Aventage RX-A1010
Dimensions (W x H x D)434 mm x 167 mm x 393 mm (with antenna: 434 mm x 235 mm x 393 mm)435 mm x 182 mm x 432 mm
17-1/8" x 7-1/8" x 17"
Weight14.5 kg (31 lbs 15 oz)15.1 kg (33.3 lbs)
Warranty3 Years3 years
SPECS Denon AVR-X6300H Yamaha Aventage RX-A1010
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)140 W (0.05% THD)110 W (0.06% THD)
Dynamic Power per Channel (4 Ω, Front)250 W x 2-channel210 W
Dynamic Power per Channel (8 Ω, Front)160 W x 2-channel135 W
Input Sensitivity and Impedance (Line)200 mV/47 kΩ200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)2.5 mV3.5 mV/47 kΩ
S/N Ratio (Line, IHF-A)102 dB100 dB
S/N Ratio (Phono MM, IHF-A)74 dB86 dB
Frequency Response (Analog In)+1/-3 dB (10 Hz to 100 kHz, Direct mode)+0/-3 dB (10 Hz to 100 kHz)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
Video Input Sensitivity/Output Level and Impedance 1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
1 Vp-p/75 Ω (Component Y and S-Video Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
0.286 Vp-p/75 Ω (S-Video C)
Video Frequency Response5 Hz to 60 MHz, 0 dB/-3 dB (Component)5 Hz to 100 MHz, ±3 dB (Component)
Ethernet Standard100BASE-TX10BASE-T/100BASE-TX
USB TerminalUSB2.0 5V, 1 AUSB2.0 5 V, 1 A
FM Frequency87.5 MHz - 107.9 MHz87.5 MHz - 107.9 MHz
FM S/N RatioMono/Stereo/HD: 78 dB/68 dB/85 dBHD: 80 dB, Mono/Stereo: 72 dB/ 70 dB
FM Harmonic Distortion (IHF, 1 kHz)Mono/Stereo/HD: 0.1%/0.2%/0.02%HD: 0.03%, Mono/Stereo: 0.3%/0.5%
AM Frequency530 kHz - 1710 kHz530 MHz - 1710 MHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.