Disclosure: We earn money from the affiliate links to products associated with content in this article.
Overview
Here we are comparing Denon AVR-X6300H to Sony STR-DH770 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X6300H has 11 channel and the Sony STR-DH770 has 7 channel amplifiers with Denon AVR-X6300H's being more powerful.
Let us have a look at some highlights of the models.
Denon AVR-X6300H Highlights
Sony STR-DH770 Highlights
- 11.2 channels
- 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
- Dolby Atmos, DTS:X, Auro 3D capable
- HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
- AirPlay 2, DLNA, HEOS
- Ethernet, Wi-Fi, Bluetooth
- USB and Phono inputs
- 7.2 channels
- 90 W (6 Ω, 20 Hz - 20 kHz, 2 channel driven)
- HDR10, 4K Passthrough
- Bluetooth
- USB input
We have evaluated both receivers. Denon AVR-X6300H gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.
Denon AVR-X6300H
Sony STR-DH770
Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...
Advantage of Denon AVR-X6300H over Sony STR-DH770
This section shows those features and specifications which are the reason to choose Denon AVR-X6300H over Sony STR-DH770.
Denon AVR-X6300H has more channels, more power per channel, more channel processing, more zones and bigger power supply. It supports Dolby Atmos, DTS:X, Auro3D, DSD streaming via USB, Amazon Alexa, Pandora, Spotify, Tidal, Deezer, Napster and SiriusXM. It has DTS Dialog Control, phono input and analog pre-outs. In video department only Denon AVR-X6300H supports Dolby Vision and Hybrid Log Gamma.
Denon AVR-X6300H | Sony STR-DH770 | |
---|---|---|
More Channels | 11.2 | 7.2 |
Certified 4 Ω Performance | ✔ | ✖ |
More Channel Processing | 11.2 | 7.1 |
Dolby Atmos | ✔ up to 7.1.4 | ✖ |
Dolby Surround Upmixer | ✔ | ✖ |
DTS:X | ✔ up to 7.1.4 | ✖ |
DTS Neural:X | ✔ | ✖ |
Auro 3D with Auro-Matic Upmixer | ✔ | ✖ |
Music Playback via USB | MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD | MP3, WMA, AAC, WAV |
Higher Resolution Music Playback via USB | ✔ up to 192 kHz | ✖ |
DSD via USB | ✔ 2-ch Input | ✖ |
DTS Dialog Control | ✔ | ✖ |
Audyssey Dynamic EQ | ✔ | ✖ |
Audyssey Dynamic Volume | ✔ | ✖ |
Audyssey LFC | ✔ | ✖ |
Audyssey Sub EQ HT | ✔ | ✖ |
Dolby Vision | ✔ | ✖ |
HLG | ✔ | ✖ |
Auto Low Latency Mode Pass-through | ✔ | ✖ |
Video Signal Upscaling | ✔ up to 4K 50/60Hz 4:4:4 | ✖ |
Analog To HDMI Upconversion | ✔ Component, Composite | ✖ |
isf Certified Calibration Control | ✔ | ✖ |
DLNA 1.5 | ✔ | ✖ |
Works with Amazon Alexa | ✔ | ✖ |
AirPlay | ✔ AirPlay 2 | ✖ |
Ethernet | ✔ | ✖ |
Wi-Fi | ✔ | ✖ |
More HDMI Inputs | 8 (1 front) | 4 |
More HDMI Outputs | 3 (2 for MAIN, 1 for ZONE2) | 1 |
More Analog Audio Line Inputs | 7 (1 front) | 4 |
Phono Input | ✔ | ✖ |
More Optical Inputs | 2 | 1 |
More Coaxial Inputs/Outputs | 2 / No | 1 / No |
More Composite Video Inputs | 5 (1 front) | 2 |
More Component Video Inputs | 2 | ✖ |
More Component Video Outputs | 1 | ✖ |
More Analog Pre-Outs | 11.2 | 0.2 |
Front A/V Inputs | HDMI, USB, Composite, L/R Audio | USB |
More Zones | 3 | 1 |
RS-232 Interface | ✔ | ✖ |
+12V Trigger Output | 2 | 0 |
Remote (IR) Input/Output | 1 / 1 | 0 / 0 |
Detachable Power Cord | ✔ | ✖ |
Analog Tuner | ✔ FM/AM | ✔ FM only with RDS |
Digital Radio | ✔ HD Radio | ✖ |
Pandora | ✔ | ✖ |
Spotify | ✔ | ✖ |
Tidal | ✔ | ✖ |
Deezer | ✔ | ✖ |
Napster | ✔ | ✖ |
SiriusXM Internet Radio | ✔ | ✖ |
More Speaker Terminals | 11 | 7 |
More Large Speaker Terminals | 11 | 7 |
Color-Coded Speaker Terminals | ✔ | ✖ |
Gold plated RCA terminals | ✔ | ✖ |
Bigger Power Supply | 750 W | 240 W |
Longer Warranty | 3 Years | 2 Years |
Higher Power Output (6 Ω, 1 kHz, 2 channel driven, FTC) | 175 W (0.7% THD) | 105 W (1% THD) |
Higher S/N Ratio (digital) | 102 dB | 100 dB (20 kHz LPF) |
Advantage of Sony STR-DH770 over Denon AVR-X6300H
This section shows those features and specifications which are the reason to choose Sony STR-DH770 over Denon AVR-X6300H.
Sony STR-DH770 has higher signal to noise ratio and higher bluetooth standard.
Denon AVR-X6300H | Sony STR-DH770 | |
---|---|---|
Dolby Pro Logic | ✖ | ✔ PLIIx |
DTS Neo | ✖ | ✔ Neo:6 |
More GUI Languages | 3 | 4 |
Higher S/N Ratio (Line, IHF-A) | 102 dB | 105 dB (500 mV) |
Newer Bluetooth Version | 3.0 + EDR | 4.2 |
Common Strengths of Denon AVR-X6300H and Sony STR-DH770
Denon AVR-X6300H and Sony STR-DH770 share common strengths such as HDR10 and bluetooth.
STRENGTHS | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
DSD via HDMI | ✔ 2-ch/Multi-ch Input | ✔ 2-ch/Multi-ch Input |
HDR10 | ✔ | ✔ |
4K or 8K Video Passthrough | up to 4K 50/60Hz 4:4:4 | up to 4K/60p (YCbCr4:4:4) |
Bluetooth | ✔ SBC, AAC | ✔ SBC, AAC |
New HDCP Version | 2.2 | 2.2 (4 in / 1 out) |
USB Input | 1 (Front) for iPod/iPhone and USB memory | 1 (Front) |
Composite Video Inputs | 5 (1 front) | 2 |
Zones | 3 | 1 |
Analog Tuner | ✔ FM/AM | ✔ FM only with RDS |
Common Weaknesses of Denon AVR-X6300H and Sony STR-DH770
Denon AVR-X6300H and Sony STR-DH770 share common weaknesses such as no front wide channel support, no MHL input, no ChromeCast, no DTS Play-Fi, no SONOS and no analog multi-channel input.
WEAKNESSES | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
No Front Wide Channel Support | ✖ | ✖ |
No Dolby Atmos Height Virtualization | ✖ | ✖ |
No DTS Virtual:X | ✖ | ✖ |
No IMAX Enhanced | ✖ | ✖ |
No HDR10+ | ✖ | ✖ |
No Dynamic HDR | ✖ | ✖ |
No VRR | ✖ | ✖ |
No QFT | ✖ | ✖ |
No MHL Input | ✖ | ✖ |
No FireConnect | ✖ | ✖ |
No FlareConnect | ✖ | ✖ |
No Chromecast Built-In | ✖ | ✖ |
No DTS Play-Fi | ✖ | ✖ |
Does Not Work with SONOS | ✖ | ✖ |
No eARC | ✖ | ✖ |
No Multi-Channel Input | ✖ | ✖ |
Selected Features
Amplifier
Denon AVR-X6300H has 11 channel and Sony STR-DH770 has 7 channel amplifiers. Denon AVR-X6300H delivers 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Sony STR-DH770 delivers 90 W (6 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load. Since 2016 all receiver manufacturers have dropped front wide channel support and these models are no exceptions.
Video Features
Both receivers support 4K passthrough up to 60p. Denon AVR-X6300H can do 4K upscaling up to 60p. Denon AVR-X6300H supports HDR10, Dolby Vision and Sony STR-DH770 supports HDR10.
HDR10
High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.
Dolby Vision
Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.
Dolby Atmos and Dolby Surround upmixer
Denon AVR-X6300H supports Dolby Atmos with its Dolby Surround upmixer. It can be configured upto 7.1.4 channels using internal amplifiers.
Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.
Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.
If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
DTS:X and Neural:X upmixer
Denon AVR-X6300H supports DTS:X. It can be configured upto 7.1.4 channels using internal amplifiers.
A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.
DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
Auro-3D with its Auro-Matic upmixer
Denon AVR-X6300H supports Auro-3D and its Auro-Matic upmixer via charged firmware upgrade. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.
D.D.S.C.
Denon AVR-X6300H has D.D.S.C (Dynamic Discrete Surround Circuit). A single IC chip is generally used in processing A/D, DSP, and D/A conversions that are vital to sound quality. The D.D.S.C. uses separate components to process the important sections of the A/D, DSP, and D/A conversions and therefore significantly improves signal processing capability and performance. In addition, the approach of developing and incorporating high-quality dedicated elements in the sections that configure the circuitry makes it easier to develop a high-grade, advanced surround circuit compared with the method where all processing is concentrated within a single chip. Denon’s proprietary digital audio technology that had for many years been developed for pure Hi-Fi components is now also alive in each block of the D.D.S.C.
Connectivity
Denon AVR-X6300H
Denon AVR-X6300H can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 channel analog pre-outs for external amplification.
Front panel has HDMI, USB, Composite and L/R Audio inputs.


Sony STR-DH770
Sony STR-DH770 can also connect to bluetooth devices via built-in bluetooth adapter. It has 4 HDMI inputs with HDCP 2.2 (4 in / 1 out) copy protection.
Front panel has USB input.


Detailed Specifications
And in the end let us list the detailed specifications of the receivers side-by-side.
Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Denon AVR-X6300H and here - Sony STR-DH770.
BASICS | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Brand | Denon | Sony |
Model | AVR-X6300H | STR-DH770 |
Type | A/V Receiver | A/V Receiver |
Country | USA | Oceania |
Release Year | 2016 | 2016 |
AMPLIFIER | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Channels | 11.2 | 7.2 |
Front Wide Channel Support | ✖ | ✖ |
THX™ Certification | ✖ | ✖ |
Continuous 6 Ω Rated | ✔ | ✔ |
Certified 4 Ω Performance | ✔ | ✖ |
Bi-amp Capability | ✔ assignable | ✔ |
AUDIO | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Maximum Channel Processing | 11.2 | 7.1 |
Air Studios Monitor Certification | ✖ | ✖ |
Dolby Atmos | ✔ up to 7.1.4 | ✖ |
Dolby Atmos Height Virtualization | ✖ | ✖ |
Dolby TrueHD | ✔ | ✔ |
Dolby Digital Plus | ✔ | ✔ |
Dolby Surround Upmixer | ✔ | ✖ |
Dolby Pro Logic | ✖ | ✔ PLIIx |
Dolby Digital EX | ✔ | ✔ |
Surround EX | ✖ | ✖ |
DTS:X | ✔ up to 7.1.4 | ✖ |
DTS Neural:X | ✔ | ✖ |
DTS Virtual:X | ✖ | ✖ |
DTS Neo | ✖ | ✔ Neo:6 |
DTS-HD Master Audio | ✔ | ✔ |
DTS-HD High Resolution Audio | ✔ | ✔ |
DTS 96/24 | ✔ | ✔ |
DTS Express | ✔ | ✖ |
DTS-ES | ✔ Discrete 6.1, Matrix 6.1 | ✔ Discrete 6.1, Matrix 6.1 |
IMAX Enhanced | ✖ | ✖ |
Auro 3D with Auro-Matic Upmixer | ✔ | ✖ |
PCM | ✔ 2-ch/Multi-ch Input | ✔ 2-ch/Multi-ch Input |
Music Playback via USB | MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD | MP3, WMA, AAC, WAV |
High Resolution Music Playback via USB and/or Network | ✔ up to 192 kHz | ✖ |
Multi-Channel Music File Playback via USB | ✖ | ✖ |
DSD via HDMI | ✔ 2-ch/Multi-ch Input | ✔ 2-ch/Multi-ch Input |
DSD via USB | ✔ 2-ch Input | ✖ |
DSD to PCM Converter | ✖ | ✖ |
USB DAC | ✖ | ✖ |
DTS Dialogue Control | ✔ | ✖ |
Dialogue Lift | ✖ | ✖ |
High-resolution Music Enhancer | ✖ | ✖ |
Audyssey Dynamic EQ | ✔ | ✖ |
Audyssey Dynamic Volume | ✔ | ✖ |
Audyssey LFC | ✔ | ✖ |
Audyssey Sub EQ HT | ✔ | ✖ |
Audyssey DSX | ✖ | ✖ |
Direct Mode | ✔ | ✔ |
Pure Direct Mode | ✔ | ✔ |
CALIBRATION | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Auto Speaker Calibration System with Mic. | ✔ Audyssey MultEQ XT32 | ✔ D.C.A.C. |
VIDEO | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
HDR10 | ✔ | ✔ |
HDR10+ | ✖ | ✖ |
Dynamic HDR | ✖ | ✖ |
BT.2020 color space | ✔ | ✔ |
Dolby Vision | ✔ | ✖ |
Hybrid Log Gamma (HLG) | ✔ | ✖ |
Quick Media Switching (QMS) | ✖ | ✖ |
Auto Low Latency Mode (ALLM) | ✔ | ✖ |
Variable Refresh Rate (VRR) | ✖ | ✖ |
Quick Frame Transport (QFT) | ✖ | ✖ |
3-D Ready | ✔ | ✔ |
Video Signal Passthrough | up to 4K 50/60Hz 4:4:4 | up to 4K/60p (YCbCr4:4:4) |
Video Signal Upscaling | ✔ up to 4K 50/60Hz 4:4:4 | ✖ |
Analog To HDMI Upconversion | ✔ Component, Composite | ✖ |
isf Certified Calibration Control | ✔ | ✖ |
CONNECTIVITY | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
MHL Input | ✖ | ✖ |
DLNA 1.5 | ✔ | ✖ |
FireConnect | ✖ | ✖ |
FlareConnect | ✖ | ✖ |
Chromecast Built-In | ✖ | ✖ |
DTS Play-Fi | ✖ | ✖ |
Works with Amazon Alexa | ✔ | ✖ |
Works with SONOS | ✖ | ✖ |
AirPlay | ✔ AirPlay 2 | ✖ |
Apple Product Connection | ✔ iPod, iPhone and iPad | ✔ iPod, iPhone |
InstaPrevue Input Source Prevue | ✖ | ✖ |
Ethernet | ✔ | ✖ |
Ethernet Switch | ✖ | ✖ |
Wi-Fi | ✔ | ✖ |
Bluetooth | ✔ SBC, AAC | ✔ SBC, AAC |
HDBaseT Compatible | ✖ | ✖ |
Enhanced Audio Return Channel (eARC) | ✖ | ✖ |
HDCP Version | 2.2 | 2.2 (4 in / 1 out) |
HDMI Inputs | 8 (1 front) | 4 |
HDMI Outputs | 3 (2 for MAIN, 1 for ZONE2) | 1 |
USB Input | 1 (Front) for iPod/iPhone and USB memory | 1 (Front) |
USB DC Out Port | ✖ | ✖ |
Analog Audio Line Inputs | 7 (1 front) | 4 |
Analog Audio Line Outputs | ✖ | ✖ |
Phono Input | ✔ | ✖ |
Optical Inputs | 2 | 1 |
Optical Outputs | ✖ | ✖ |
Coaxial Inputs/Outputs | 2 / No | 1 / No |
Composite Video Inputs | 5 (1 front) | 2 |
Composite Video Outputs | 1 | 1 |
S-Video Inputs | ✖ | ✖ |
S-Video Outputs | ✖ | ✖ |
Component Video Inputs | 2 | ✖ |
Component Video Outputs | 1 | ✖ |
PC In | ✖ | ✖ |
Multi-Channel Input | ✖ | ✖ |
Analog Pre-Outs | 11.2 | 0.2 |
XLR Inputs | ✖ | ✖ |
XLR Pre-outs | ✖ | ✖ |
Front A/V Inputs | HDMI, USB, Composite, L/R Audio | USB |
Speaker A/B | ✔ assignable | ✔ |
Headphone Out | ✔ 6.3 mm | ✔ 6.3 mm |
ZONES | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Zones | 3 | 1 |
RS-232 Interface | ✔ | ✖ |
+12V Trigger Output | 2 | 0 |
Remote (IR) Input/Output | 1 / 1 | 0 / 0 |
MISC | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
On-Screen Display | ✔ Advanced Graphic User Interface | ✔ Graphical User Interface (Only through HDMI) |
GUI Languages | 3 | 4 |
Detachable Power Cord | ✔ | ✖ |
RADIO | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Analog Tuner | ✔ FM/AM | ✔ FM only with RDS |
Digital Radio | ✔ HD Radio | ✖ |
Pandora | ✔ | ✖ |
Spotify | ✔ | ✖ |
Tidal | ✔ | ✖ |
Deezer | ✔ | ✖ |
Napster | ✔ | ✖ |
SiriusXM Internet Radio | ✔ | ✖ |
CONSTRUCTION | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Speaker Terminals | 11 | 7 |
Large Speaker Terminals | 11 | 7 |
Color-Coded Speaker Terminals | ✔ | ✖ |
Gold plated RCA terminals | ✔ | ✖ |
POWER | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Power Supply | AC 120 V, 60 Hz | AC 230 V, 50 Hz |
Power Consumption | 750 W | 240 W |
Standby Power | 0.1 W | 0.3 W |
GENERAL | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Dimensions (W x H x D) | 434 mm x 167 mm x 393 mm (with antenna: 434 mm x 235 mm x 393 mm) | 430 mm x 156 mm x 329.4 mm 17" x 6-1/4" x 13" |
Weight | 14.5 kg (31 lbs 15 oz) | 7.8 kg (17 lbs. 4 oz.) |
Warranty | 3 Years | 2 Years |
SPECS | Denon AVR-X6300H | Sony STR-DH770 |
---|---|---|
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC) | 175 W (0.7% THD) | 105 W (1% THD) |
Input Sensitivity and Impedance (Line) | 200 mV/47 kΩ | 500 mV/50 kΩ |
S/N Ratio (Line, IHF-A) | 102 dB | 105 dB (500 mV) |
S/N Ratio (digital) | 102 dB | 100 dB (20 kHz LPF) |
Frequency Response (Analog In) | +1/-3 dB (10 Hz to 100 kHz, Direct mode) | 10 Hz - 100 kHz/+0.5 dB, -2 dB |
DSD Sampling Rates via HDMI | 2.8 MHz | 2.8 MHz |
Video Input Sensitivity/Output Level and Impedance | 1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite) | 1 Vp-p/75 Ω (Composite) |
Bluetooth Version | 3.0 + EDR | 4.2 |
Bluetooth Frequency | 2.4 GHz | 2.4 GHz |
USB Terminal | USB2.0 5V, 1 A | Type A, Ver. 2.0, 5 V, 1 A |
FM Frequency | 87.5 MHz - 107.9 MHz | 87.5 MHz - 108.0 MHz |
* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted