Denon AVR-X5200W vs Onkyo TX-NR575E

Here we are comparing Denon AVR-X5200W to Onkyo TX-NR575E to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X5200W has 9 channel and the Onkyo TX-NR575E has 7 channel amplifiers.

Denon AVR-X5200W	Onkyo TX-NR575E
Denon AVR-X5200W was introduced in 2014. It is equipped with 9 channel amplifier with 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and Auro-3D, passes 4K/60Hz and upscales up to 4K 50/60Hz 4:4:4 video signal.	Onkyo TX-NR575E was introduced in 2017. It is equipped with 7 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz video signal.

We evaluated Denon AVR-X5200W and Onkyo TX-NR575E and gave them scores of 88 and 84 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Denon AVR-X5200W over Onkyo TX-NR575E.

	Denon AVR-X5200W	vs	Onkyo TX-NR575E
More Channels	9.2	vs	7.2
Higher Power Output	140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support		vs
More Channel Processing	11.2	vs	7.1
Dolby Digital EX		vs
DTS Neo	Neo:X	vs
Auro 3D with Auro-Matic Upmixer		vs
Dialog Enhancement		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Audyssey LFC		vs
Audyssey Sub EQ HT		vs
Audyssey DSX		vs
Auto Low Latency Mode Pass-through		vs
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	vs
Component Video Maximum Resolution	1080p	vs	480i/576i
isf Certified Calibration Control		vs
More HDMI Inputs	8 (1 front)	vs	6
More HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	vs	1
More Coaxial Inputs/Outputs	2	vs	1
More RCA Pre-Outs	13.2	vs	0.2
More Composite Video Inputs	5 (1 front)	vs	2
More Composite Video Outputs	1	vs
More Component Video Outputs	1	vs
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	vs	Mini-Jack
Speaker A/B	assignable	vs
Detachable Power Cord		vs
More Zones	3	vs	2
More Powered Zones	2 and 3	vs	2
Zone 2 Outs	HDMI, Component, Composite, Pre Out	vs	RCA Line Out
RS-232C Interface		vs
+12V Trigger Output	2	vs	0
Remote (IR) Input/Output	1 / 1	vs	0 / 0
Digital Radio	HD Radio	vs
Pandora		vs
SiriusXM		vs
More Speaker Terminals	11	vs	9
More Large Speaker Terminals	11	vs	9
Color-Coded Speaker Terminals		vs
Transparent High-Grade Speaker Terminals		vs
Gold plated RCA terminals		vs
Bigger Power Supply	730 W	vs	480 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	205 W (1% THD)	vs	135 W (1% THD)
Higher Dynamic Power per Channel, 4 Ω, Front)	250 W x 2-channel	vs	125 W
Higher Dynamic Power per Channel, 8 Ω, Front)	160 W x 2-channel	vs	85 W
Longer Warranty	3 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Onkyo TX-NR575E over Denon AVR-X5200W.

	Denon AVR-X5200W	vs	Onkyo TX-NR575E
Higher DAC Specs	192 kHz/24 Bit	vs	384 kHz/32 Bit
DTS:X		vs
DTS Neural:X		vs
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
DTS Dialog Control		vs
HDR10		vs
BT.2020 color space		vs
Dolby Vision		vs
Chromecast Built-In		vs
DTS Play-Fi		vs
More GUI Languages	3	vs	9
Analog Tuner	FM/AM	vs	FM/AM with RDS
Tidal		vs
Deezer		vs
Higher S/N Ratio (Line, IHF-A)	102 dB	vs	106 dB
Higher S/N Ratio (Phono MM, IHF-A)	74 dB	vs	80 dB
Higher DSD Sampling Rate via USB	2.8 MHz	vs	2.8 MHz, 5.6 MHz
Wi-Fi Standard	IEEE 802.11 b/g/n	vs	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	2.4 GHz	vs	5 GHz, 2.4 GHz
Newer Bluetooth Version	2․1 + EDR	vs	4․1 + LE
Wider AM Frequency Range	530 kHz - 1710 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Denon AVR-X5200W	Onkyo TX-NR575E
Dolby Atmos	up to 7.1.4 or 9.1.2 with external amp
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32 + PRO	AccuEQ with AccuReflex™
New HDCP Version	2.2	2.2 (5 inputs / 1 output)
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Wi-Fi
Bluetooth		SBC, AAC
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
Many RCA Line Inputs	7 (1 front)	7 (1 Front)
Phono Input
Composite Video Inputs	5 (1 front)	2
Component Video Inputs	2	2
Ethernet
Analog Tuner	FM/AM	FM/AM with RDS
Spotify

WEAKNESSES	Denon AVR-X5200W	Onkyo TX-NR575E
No Dolby Atmos Height Virtualization
No IMAX Enhanced
No HDR10+
No eARC
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Does not Work with Amazon Alexa
Few 8K Inputs

Denon AVR-X5200W	Onkyo TX-NR575E
9 channel Monolithic Amplifier: Denon AVR-X5200W features 9 channel power amplifier with Monolithic design. It is rated at 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Linear Class A/B Amplifier: Onkyo TX-NR575E features 7 channel power amplifier with Linear Class A/B design. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Dynamic Audio Amplification: Onkyo TX-NR575E features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.

AMPLIFIER	Denon AVR-X5200W	Onkyo TX-NR575E
Channels	9.2	7.2
Power Output	140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Monolithic	Linear Class A/B
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable

Denon AVR-X5200W's and Onkyo TX-NR575E's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Denon AVR-X5200W: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4, 9.2.2 with addition of external 2 channel amplifier.
Onkyo TX-NR575E: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Denon AVR-X5200W: Not supported.
Onkyo TX-NR575E: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Denon AVR-X5200W: 5.2, 7.2, 9.2 with internal amplifier.
Onkyo TX-NR575E: 5.2, 7.2 with internal amplifier.
• Front Wide Channel support: With the presence of two front wide speakers you can enhance the front surround stage. The following speaker configurations are available for front wide channels:
Denon AVR-X5200W: 9.2, 9.2.2.
Onkyo TX-NR575E: Does not support.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Denon AVR-X5200W and Onkyo TX-NR575E support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Onkyo TX-NR575E supports DTS:X.

• DTS Neural:X: Onkyo TX-NR575E features DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Onkyo TX-NR575E has DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Denon AVR-X5200W supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

Audyssey DSX

Denon AVR-X5200W supports Audyssey DSX which allows you to augment a standard five-channel home theater with either two Front Wide or two Front High speakers. The Wide channels create an expansive soundstage and bring out convincing directional effects. Alternatively, Height channels can add a vertical dimension to movie and game soundtracks.

AUDIO DECODING	Denon AVR-X5200W	Onkyo TX-NR575E
Dolby Atmos	up to 7.1.4 or 9.1.2 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo	Neo:X
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Denon AVR-X5200W comes with 8 HDMI inputs. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

Onkyo TX-NR575E comes with 6 HDMI inputs. It has 1 output.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling on Denon AVR-X5200W: It can upscale up to 4K 50/60Hz 4:4:4 from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on Onkyo TX-NR575E only).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Denon AVR-X5200W does not support HDR.

Onkyo TX-NR575E supports HDR10 and Dolby Vision. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Gaming Features

Denon AVR-X5200W supports Auto Low Latency Mode (ALLM) for lag-free and smooth gaming.

VIDEO FEATURES	Denon AVR-X5200W	Onkyo TX-NR575E
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2 (5 inputs / 1 output)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4

TERMINALS	Denon AVR-X5200W	Onkyo TX-NR575E
HDMI Inputs	8 (1 front)	6
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	1
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	7 (1 front)	7 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	13.2	0.2
XLR Pre-outs
Composite Video Inputs	5 (1 front)	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1

GENERAL	Denon AVR-X5200W	Onkyo TX-NR575E
Brand	Denon	Onkyo
Model	AVR-X5200W	TX-NR575E
Type	A/V Receiver	A/V Receiver
Country	USA	Europe
Release Year	2014	2017
Predecessor		Onkyo TX-NR555
Successor		Onkyo TX-NR585

AMPLIFIER	Denon AVR-X5200W	Onkyo TX-NR575E
Channels	9.2	7.2
Power Output	140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Monolithic	Linear Class A/B
Discrete Amplification
Dynamic Audio Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		Front L/R channels
Optimum Gain Volume Circuitry
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Mono Block Power Amplifier Construction
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability	assignable
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Denon AVR-X5200W	Onkyo TX-NR575E
Digital Signal Processing (DSP) Engine	4 powerful high speed 4th generation SHARC DSP processors	32-bit Digital Signal Processing Engines
DAC		AKM AK4458
DAC Specs	192 kHz/24 Bit	384 kHz/32 Bit
Maximum Channel Processing	11.2	7.1
D.D.S.C. HD Digital
Alpha Processing	AL24 Processing Plus
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.4 or 9.1.2 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo	Neo:X
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		Front L/R Channels
Compressed Music Enhancer		Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Denon AVR-X5200W	Onkyo TX-NR575E
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32 + PRO	AccuEQ with AccuReflex™
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Denon AVR-X5200W	Onkyo TX-NR575E
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2 (5 inputs / 1 output)
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	1080p	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Denon AVR-X5200W	Onkyo TX-NR575E
Wi-Fi
Bluetooth		SBC, AAC
Bluetooth Headphone Transmission
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
AirPlay	AirPlay	AirPlay
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Denon Remote App for iOS and Android devices	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Denon AVR-X5200W	Onkyo TX-NR575E
HDMI Inputs	8 (1 front)	6
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	1
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	7 (1 front)	7 (1 Front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	13.2	0.2
XLR Pre-outs
Composite Video Inputs	5 (1 front)	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	Mini-Jack
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
uport

ZONES	Denon AVR-X5200W	Onkyo TX-NR575E
Number of Zones	3	2
Powered Zones	2 and 3	2
Zone 2 Outs	HDMI, Component, Composite, Pre Out	RCA Line Out
Zone 3 Outs	Pre Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	2	0
Remote (IR) Input/Output	1 / 1	0 / 0

MISCELLANEOUS	Denon AVR-X5200W	Onkyo TX-NR575E
On-Screen Display	Advanced Graphic User Interface	Graphical Overlaid On-Screen Display (OSD) via HDMI with Quick Set-Up
GUI Languages	3	9
Control4 SDDP
Display	2 lines
Remote Controller	RC-1193
Pre-programmed / Learnable / LCD Display	/ /
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote		/
On Screen Remote Programming
Bi-directional Remote Setup via GUI
Smart Grid-Ready
Denon Link HD
Setup Assistant
Quick Select plus / Quick Select	/

RADIO	Denon AVR-X5200W	Onkyo TX-NR575E
Analog Tuner	FM/AM	FM/AM with RDS
Presets		40
Digital Radio	HD Radio
Internet Radio	vTuner	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Denon AVR-X5200W	Onkyo TX-NR575E
Front Panel	Metal
Solid Aluminum Front
Speaker Terminals	11	9
Large Speaker Terminals	11	9
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals

POWER	Denon AVR-X5200W	Onkyo TX-NR575E
Power Supply	AC 120 V, 60 Hz	AC 220-240 V, 50/60 Hz
Independent Power Supply
H.C.P.S. (High Current Power Supply)
Toroidal Transformer
Power Consumption	730 W	480 W
No Sound Power	ECO On/Off: 65 W/110 W	45 W
Standby Power	0.1 W	0.15 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Denon AVR-X5200W	Onkyo TX-NR575E
Dimensions (W x H x D)	434 mm x 167 mm x 393 mm (with antenna: 434 mm x 235 mm x 393 mm) 17-3/32" x 6-37/64" x 15-15/32" (with antenna up: 17-3/32" x 9-1/4" x 15-15/32")	435 mm x 173.5 mm x 378 mm 17-1/8" x 6-13/16" x 14-7/8"
Weight	14.1 kg (31 lbs 1 oz)	9.4 kg (20.7 lbs)

SPECIFICATIONS	Denon AVR-X5200W	Onkyo TX-NR575E
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	140 W (0.05% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	175 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	250 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	205 W (1% THD)	135 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)		160 W
Dynamic Power per Channel (4 Ω, Front)	250 W x 2-channel	125 W
Dynamic Power per Channel (8 Ω, Front)	160 W x 2-channel	85 W
THD		0.08% (20 Hz - 20 kHz, Half power)
THD (Digital)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.005% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ (1 kHz, 100 W/8 Ω)
Input Sensitivity and Impedance (Phono MM)	2.5 mV	3.5 mV/47 kΩ
Rated Output digital	2 V (at 0 dB playback)
Rated Headphone Jack Output Level and Impedance		330 Ω
Rated Headphone Power Output		80 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	102 dB	106 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	80 dB
S/N Ratio (digital)	102 dB
Dynamic Range (digital)	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	2.8 MHz	2.8 MHz, 5.6 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz to 60 MHz, 0 dB/-3 dB (Component) 5 Hz to 10 MHz, 0 dB/-3 dB (Composite)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 b/g/n	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	2․1 + EDR	4․1 + LE
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 108.0 MHz
FM Effective Sensitivity	1.5 µV (14.8 dBf)
FM S/N Ratio	Mono/Stereo/HD: 78 dB/68 dB/85 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo/HD: 0.1%/0.2%/0.02%
AM Frequency	530 kHz - 1710 kHz	522/530 kHz - 1611/1710 kHz
AM Effective Sensitivity	20 µV
AM S/N Ratio	85 dB
Warranty	3 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted