Denon AVR-X4300H vs Onkyo TX-RZ920

Here we are comparing Denon AVR-X4300H to Onkyo TX-RZ920 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 9 channel amplifiers.

Denon AVR-X4300H	Onkyo TX-RZ920
Denon AVR-X4300H was introduced in 2016. It is equipped with 9 channel amplifier with 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 4K/60Hz and upscales up to 4K 50/60Hz 4:4:4 video signal.	Onkyo TX-RZ920 was introduced in 2017. It is equipped with 9 channel amplifier with 135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Denon AVR-X4300H and Onkyo TX-RZ920 and gave them scores of 92 and 91 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Denon AVR-X4300H over Onkyo TX-RZ920.

	Denon AVR-X4300H	vs	Onkyo TX-RZ920
Dolby Digital EX		vs
Auro 3D with Auro-Matic Upmixer		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Audyssey LFC		vs
Audyssey Sub EQ HT		vs
Auto Low Latency Mode Pass-through		vs
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	vs	1080p to 4K
Component Video Maximum Resolution	1080p	vs	480i/576i
isf Certified Calibration Control		vs
Works with Amazon Alexa		vs
More HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	vs	2 (1 Main, 1 Sub/Zone2)
More Composite Video Inputs	4 (1 front)	vs	2
More Composite Video Outputs	1	vs
More Component Video Outputs	1	vs
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	vs	HDMI
Speaker A/B	assignable	vs
More Powered Zones	2 and 3	vs	2 and 3
Zone 2 Outs	HDMI, Component, Composite, Pre Out	vs	HDMI, RCA Pre/Line Out
Remote (IR) Input/Output	1 / 1	vs	1 / 0
Pandora		vs
Napster		vs
SiriusXM		vs
Color-Coded Speaker Terminals		vs
Transparent High-Grade Speaker Terminals		vs
Bigger Power Supply	670 W	vs	310 W

This section shows those features and specifications which are the reason to choose Onkyo TX-RZ920 over Denon AVR-X4300H.

	Denon AVR-X4300H	vs	Onkyo TX-RZ920
Higher Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification		vs	Select™ (previously known as Select2)
Higher DAC Specs	192 kHz/24 Bit	vs	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Enhanced Audio Return Channel (eARC)		vs	via future firmware update
Chromecast Built-In		vs
Works with SONOS		vs	requires firmware update & Sonos Connect
DTS Play-Fi		vs
Higher Dynamic Power per Channel, 4 Ω, Front)	190 W x 2-channel	vs	270 W
Higher Dynamic Power per Channel, 8 Ω, Front)	130 W x 2-channel	vs	160 W
Higher S/N Ratio (Line, IHF-A)	102 dB	vs	107 dB
Higher S/N Ratio (Phono MM, IHF-A)	74 dB	vs	90 dB
Higher DSD Sampling Rate via USB	5.6 MHz, 2.8 MHz	vs	2.8 MHz, 5.6 MHz, 11.2 MHz
Wi-Fi Standard	IEEE 802.11 b/g/n	vs	IEEE 802.11 a/b/g/n
Newer Bluetooth Version	3․0 + EDR	vs	4․1 + LE
Wider AM Frequency Range	522 kHz - 1611 kHz	vs	522/530 kHz - 1611/1710 kHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Denon AVR-X4300H	Onkyo TX-RZ920
High Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Channel Processing	11.2	11.1
Dolby Atmos	up to 7.1.4 with external amp
DTS:X	up to 7.1.4 with external amp
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	AccuEQ with AccuReflex™
HDR10
Dolby Vision
New HDCP Version	2.2	2.2
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Wi-Fi
Bluetooth	SBC, AAC	SBC, AAC
Many HDMI Inputs	8 (1 front)	8 (1 front)
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
Many RCA Line Inputs	6 (1 front)	6
Phono Input
RCA Pre-Outs	11.2	11.2
Composite Video Inputs	4 (1 front)	2
Component Video Inputs	2	2
Ethernet
Zones	3	3
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Spotify
Tidal

WEAKNESSES	Denon AVR-X4300H	Onkyo TX-RZ920
No Front Wide Channel Support
No Dolby Atmos Height Virtualization
No IMAX Enhanced
No HDR10+
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Few 8K Inputs
No Digital Radio

Denon AVR-X4300H	Onkyo TX-RZ920
9 channel Amplifier: Denon AVR-X4300H features 9 channel power amplifier. It is rated at 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	9 channel Amplifier: Onkyo TX-RZ920 features 9 channel power amplifier. It is rated at 135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Dynamic Audio Amplification: Onkyo TX-RZ920 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.

THX™ Select™ (previously known as Select2) certification

Onkyo TX-RZ920 is THX™ Select™ (previously known as Select2) certified. This means that it is for medium sized rooms, up to 2,000 cubic feet in size, with a 10-12 foot viewing distance from the screen.

AMPLIFIER	Denon AVR-X4300H	Onkyo TX-RZ920
Channels	9.2	9.2
Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable

Denon AVR-X4300H's and Onkyo TX-RZ920's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Denon AVR-X4300H: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Onkyo TX-RZ920: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Denon AVR-X4300H: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Onkyo TX-RZ920: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Denon AVR-X4300H: 5.2, 7.2 with internal amplifier.
Onkyo TX-RZ920: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Denon AVR-X4300H and Onkyo TX-RZ920 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Denon AVR-X4300H and Onkyo TX-RZ920 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Denon AVR-X4300H supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

AUDIO DECODING	Denon AVR-X4300H	Onkyo TX-RZ920
Dolby Atmos	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Denon AVR-X4300H comes with 8 HDMI inputs. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

Onkyo TX-RZ920 comes with 8 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling on Denon AVR-X4300H: It can upscale up to 4K 50/60Hz 4:4:4 from HDMI and analog sources.
  4K Upscaling on Onkyo TX-RZ920: It can upscale 1080p to 4K from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Onkyo TX-RZ920 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Denon AVR-X4300H supports Auto Low Latency Mode (ALLM) for lag-free and smooth gaming.

VIDEO FEATURES	Denon AVR-X4300H	Onkyo TX-RZ920
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)		via future firmware update
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	1080p to 4K

TERMINALS	Denon AVR-X4300H	Onkyo TX-RZ920
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	6 (1 front)	6
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	11.2
XLR Pre-outs
Composite Video Inputs	4 (1 front)	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1

GENERAL	Denon AVR-X4300H	Onkyo TX-RZ920
Brand	Denon	Onkyo
Model	AVR-X4300H	TX-RZ920
Type	A/V Receiver	A/V Receiver
Country	UK	China
Release Year	2016	2017
Predecessor	Denon AVR-X4200W	Onkyo TX-RZ900
Successor	Denon AVR-X4400H

AMPLIFIER	Denon AVR-X4300H	Onkyo TX-RZ920
Channels	9.2	9.2
Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Discrete Amplification
Dynamic Audio Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		All Channels
Optimum Gain Volume Circuitry
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Mono Block Power Amplifier Construction
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability	assignable
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Denon AVR-X4300H	Onkyo TX-RZ920
Digital Signal Processing (DSP) Engine	4 powerful high speed 4th generation SHARC DSP processors	32-bit Digital Signal Processing Engines
DAC		AKM AK4490 for Front L/R AKM AK4458 for Other Channels AKM AK4388 (x2) for Zone 2 and Zone 3
DAC Specs	192 kHz/24 Bit	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3
Maximum Channel Processing	11.2	11.1
D.D.S.C. HD Digital
Alpha Processing	AL24 Processing Plus
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		All Channels
Compressed Music Enhancer		Advanced Music Optimizer (bluetooth included)
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Denon AVR-X4300H	Onkyo TX-RZ920
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	AccuEQ with AccuReflex™
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Denon AVR-X4300H	Onkyo TX-RZ920
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)		via future firmware update
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	1080p to 4K
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	1080p	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Denon AVR-X4300H	Onkyo TX-RZ920
Wi-Fi
Bluetooth	SBC, AAC	SBC, AAC
Bluetooth Headphone Transmission
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS		requires firmware update & Sonos Connect
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
AirPlay	AirPlay 2	AirPlay 2 after firmware update
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Denon AVR-X4300H	Onkyo TX-RZ920
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	6 (1 front)	6
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	11.2
XLR Pre-outs
Composite Video Inputs	4 (1 front)	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	2	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	HDMI
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
uport

ZONES	Denon AVR-X4300H	Onkyo TX-RZ920
Number of Zones	3	3
Powered Zones	2 and 3	2 and 3
Zone 2 Outs	HDMI, Component, Composite, Pre Out	HDMI, RCA Pre/Line Out
Zone 3 Outs	Pre Out	RCA Pre/Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	2	2 (A: 100 mA, B:25 mA)
Remote (IR) Input/Output	1 / 1	1 / 0

MISCELLANEOUS	Denon AVR-X4300H	Onkyo TX-RZ920
On-Screen Display	Advanced Graphic User Interface	Graphical User Interface with Overlaid On-Screen Display (OSD) via HDMI with Quick Setup Function
GUI Languages	9
Control4 SDDP
Display	2 lines
Remote Controller	RC-1211
Pre-programmed / Learnable / LCD Display	/ /
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote		/
Smart Grid-Ready
Denon Link HD
Setup Assistant
Quick Select plus / Quick Select	/

RADIO	Denon AVR-X4300H	Onkyo TX-RZ920
Analog Tuner	FM/AM with RDS	FM/AM with RDS
Presets		40
Digital Radio
Internet Radio	vTuner	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Denon AVR-X4300H	Onkyo TX-RZ920
Front Panel	Metal
Solid Aluminum Front
Speaker Terminals	11	11
Large Speaker Terminals	11	11
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals

POWER	Denon AVR-X4300H	Onkyo TX-RZ920
Power Supply	AC 230 V, 50/60 Hz	AC 220-230 V, 50/60 Hz
H.C.P.S. (High Current Power Supply)		Customized High-Output Transformer
Toroidal Transformer
Power Consumption	670 W	310 W
No Sound Power	ECO On/Off: 55 W/85 W
Standby Power	0.1 W	0.1 W
Capacitor Bank		15,000 µF
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Denon AVR-X4300H	Onkyo TX-RZ920
Dimensions (W x H x D)	434 mm x 167 mm x 389 mm (with antenna: 434 mm x 236 mm x 389 mm)	435 mm x 201 mm x 453 mm 17-1/8" x 7-15/16" x 17-13/16"
Weight	13.5 kg (29 lbs 12 oz)	16.6 kg (36.6 lbs)

SPECIFICATIONS	Denon AVR-X4300H	Onkyo TX-RZ920
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	125 W (0.05% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	165 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	235 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	200 W (1% THD)
Maximum Power Output (4 Ω, 1 kHz, 1 channel Driven)		310 W (10% THD)
Dynamic Power per Channel (3 Ω, Front)		320 W
Dynamic Power per Channel (4 Ω, Front)	190 W x 2-channel	270 W
Dynamic Power per Channel (8 Ω, Front)	130 W x 2-channel	160 W
THD		0.04% (1 kHz, 100 W, 8 Ω)
THD (Digital)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.005% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/82 kΩ
Input Sensitivity and Impedance (Phono MM)	2.5 mV	3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/330 Ω
Rated Output digital	2 V (at 0 dB playback)
Rated Headphone Jack Output Level and Impedance		43 Ω
Rated Headphone Power Output		55 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	102 dB	107 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	90 dB
S/N Ratio (digital)	102 dB
Dynamic Range (digital)	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz to 60 MHz, 0 dB/-3 dB (Component)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 b/g/n	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	3․0 + EDR	4․1 + LE
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	Ver. 2.0, 5 V, 1 A
FM Frequency	87.5 MHz - 108.0 MHz	87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 2.8 µV (20.2 dBf)
FM Effective Sensitivity	1.2 µV (12.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%
AM Frequency	522 kHz - 1611 kHz	522/530 kHz - 1611/1710 kHz
AM Effective Sensitivity	18 µV
Warranty	3 Years	3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted