Denon AVR-X3800H vs Integra DRX-3.4

Here we are comparing Denon AVR-X3800H to Integra DRX-3.4 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X3800H has 9 channel and the Integra DRX-3.4 has 9 channel amplifiers with Denon AVR-X3800H's being more powerful.

Denon AVR-X3800H	Integra DRX-3.4
Denon AVR-X3800H was introduced in 2022. It is equipped with 9 channel amplifier with 105 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.4 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 8K/60Hz and 4K/120Hz and upscales up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.	Integra DRX-3.4 was introduced in 2021. It is equipped with 9 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 9.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz and upscales from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz video signal.

We evaluated Denon AVR-X3800H and Integra DRX-3.4 and gave both of them the score of 92 out of 100. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Denon AVR-X3800H over Integra DRX-3.4.

	Denon AVR-X3800H	vs	Integra DRX-3.4
More Channels	9.4	vs	9.2
Higher Power Output	105 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Higher DAC Specs	384 kHz/32 Bit	vs	192 kHz/24 Bit
More Channel Processing	11.4	vs	9.1
Dolby Atmos Music		vs
Dolby Digital EX		vs
DTS Virtual:X		vs
Auro 3D with Auro-Matic Upmixer	Built-In	vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Audyssey LFC		vs
Audyssey Sub EQ HT		vs
Independent Subwoofer Outputs		vs
Dynamic HDR		vs
isf Certified Calibration Control		vs
More HDMI Outputs	3 (2 x 8K for MAIN, 1 x 4K for ZONE2)	vs	2 (1 Main, 1 Sub/Zone2)
More Optical Inputs	2	vs	1
More Coaxial Inputs/Outputs	2	vs	1
More RCA Pre-Outs	11.4	vs	9.2 (barter to Zone 3 Pre/Line Out)
Napster		vs
SiriusXM		vs
More Speaker Terminals	11	vs	9
More Large Speaker Terminals	11	vs	9
Color-Coded Speaker Terminals		vs
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	105 W (0.08% THD)	vs	100 W (0.08% THD)
Wider AM Frequency Range	520 kHz - 1710 kHz	vs	530 kHz - 1710 kHz

This section shows those features and specifications which are the reason to choose Integra DRX-3.4 over Denon AVR-X3800H.

	Denon AVR-X3800H	vs	Integra DRX-3.4
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC
Jitter Reduction		vs	PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
QMS		vs
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi		vs	via Integra Music Control App
More HDMI Inputs	6	vs	7 (1 front)
More 8K Inputs	6	vs	7
More RCA Line Inputs	5	vs	7 (1 front)
More Composite Video Inputs		vs	3 (1 front)
More Component Video Inputs		vs	1
Front A/V Inputs	USB	vs	HDMI, Composite, L/R Audio
More Zones	2	vs	3
More Powered Zones	2	vs	2 and 3
+12V Trigger Output	1	vs	3 (A:100 mA, B:25 mA, C:25 mA)
Remote (IR) Input/Output	1 / 1	vs	2 / 1
More GUI Languages	3	vs	9
Gold plated RCA terminals		vs
Bigger Power Supply	660 W	vs	750 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	215 W (10% THD)	vs	225 W (10% THD)
Higher S/N Ratio (Line, IHF-A)	100 dB	vs	106 dB
Higher S/N Ratio (Phono MM, IHF-A)	74 dB	vs	80 dB
Higher DSD Sampling Rate via USB	5.6 MHz, 2.8 MHz	vs	2.8 MHz, 5.6 MHz, 11.2 MHz

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Denon AVR-X3800H	Integra DRX-3.4
Channel Processing	11.4	9.1
Dolby Atmos	up to 7.1.4
Dolby Atmos Height Virtualization
DTS:X	up to 7.1.4
IMAX Enhanced
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32 and Dirac Live (upgrade)	Dirac Live™ and AccuEQ Advance Room Corrections
HDR10
HDR10+
Dolby Vision
HDMI Version	2.1	2.1
eARC
New HDCP Version	2.3	2.3
Auto Low Latency Mode Pass-through
VRR
QFT
8K Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit
8K Upscaling	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz
Wi-Fi
Bluetooth	SBC	SBC, AAC, aptX, aptX HD
Works with Amazon Alexa
Google Assistant
Many 8K Inputs	6	7
USB Input	1 Front for USB memory	1 (Rear)
Phono Input
RCA Pre-Outs	11.4	9.2 (barter to Zone 3 Pre/Line Out)
Ethernet
Analog Tuner	FM/AM	FM/AM
Pandora
Spotify
Tidal

WEAKNESSES	Denon AVR-X3800H	Integra DRX-3.4
No Front Wide Channel Support
No Digital Radio

Denon AVR-X3800H	Integra DRX-3.4
9 channel Amplifier: Denon AVR-X3800H features 9 channel power amplifier. It is rated at 105 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	9 channel Amplifier: Integra DRX-3.4 features 9 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

AMPLIFIER	Denon AVR-X3800H	Integra DRX-3.4
Channels	9.4	9.2
Power Output	105 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable	Front L/R Channels

Denon AVR-X3800H's and Integra DRX-3.4's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Denon AVR-X3800H: 5.4.2, 5.4.4, 7.4.2 with internal amplifier and 7.4.4 with addition of external 2 channel amplifier.
Integra DRX-3.4: 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Denon AVR-X3800H: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.4.2, 5.4.4, 7.4.2 with internal amplifier and 7.4.4 with addition of external 2 channel amplifier.
Integra DRX-3.4: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Denon AVR-X3800H: 5.4, 7.4 with internal amplifier.
Integra DRX-3.4: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Denon AVR-X3800H and Integra DRX-3.4 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Both models support Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Denon AVR-X3800H and Integra DRX-3.4 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Denon AVR-X3800H supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Denon AVR-X3800H supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Denon AVR-X3800H and Integra DRX-3.4 are IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Denon AVR-X3800H	Integra DRX-3.4
Dolby Atmos	up to 7.1.4
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	up to 7.1.4
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	Built-In

Denon AVR-X3800H comes with 6 HDMI 2.1 inputs with 8K support. It has 3 outputs - 2 x 8K for MAIN and 1 x 4K for ZONE2.

Integra DRX-3.4 comes with 7 HDMI 2.1 inputs with 8K support. It has 2 outputs - 1 Main and 1 Sub/Zone2.

• 8K/60Hz and 4K/120Hz Passthrough on Denon AVR-X3800H: All inputs pass up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.
  8K/60Hz and 4K/120Hz Passthrough on Integra DRX-3.4: All inputs pass up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit video signal.
• 8K Upscaling: Both receivers can upscale up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 from HDMI sources. Integra DRX-3.4 can also upscale from analog sources.
• Analog To HDMI Upconversion: Integra DRX-3.4 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.3 Copy Protection: Both receivers are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on Integra DRX-3.4 only).
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Denon AVR-X3800H supports HDR10, HDR10+, Dolby Vision, Dynamic HDR and Hybrid Log-Gamma.

Integra DRX-3.4 supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Denon AVR-X3800H and Integra DRX-3.4 support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Both receivers support Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Denon AVR-X3800H	Integra DRX-3.4
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit
Video Signal Upscaling	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz

TERMINALS	Denon AVR-X3800H	Integra DRX-3.4
HDMI Inputs	6	7 (1 front)
HDMI Outputs	3 (2 x 8K for MAIN, 1 x 4K for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	6	7
USB Input	1 Front for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	5	7 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.4	9.2 (barter to Zone 3 Pre/Line Out)
XLR Pre-outs
Composite Video Inputs		3 (1 front)
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs		1
Component Video Outputs

GENERAL	Denon AVR-X3800H	Integra DRX-3.4
Brand	Denon	Integra
Model	AVR-X3800H	DRX-3.4
Type	A/V Receiver	A/V Receiver
Country	USA	North America
Release Year	2022	2021
Predecessor	Denon AVR-X3700H	Integra DRX-3.3

AMPLIFIER	Denon AVR-X3800H	Integra DRX-3.4
Channels	9.4	9.2
Power Output	105 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Discrete Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		Front L/R
Optimum Gain Volume Circuitry
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Mono Block Power Amplifier Construction
Bi-amp Capability	assignable	Front L/R Channels

AUDIO FEATURES	Denon AVR-X3800H	Integra DRX-3.4
Digital Signal Processing (DSP) Engine		32-Bit DSP Chip for Advanced Processing
DAC	AKM
DAC Specs	384 kHz/32 Bit	192 kHz/24 Bit
Maximum Channel Processing	11.4	9.1
D.D.S.C. HD Digital
Alpha Processing
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.4
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X	up to 7.1.4
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	Built-In
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, LPCM
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		All Channels
Compressed Music Enhancer		Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Denon AVR-X3800H	Integra DRX-3.4
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32 and Dirac Live (upgrade)	Dirac Live™ and AccuEQ Advance Room Corrections
Audyssey App Support
Standing Wave Control		Standing Wave EQ
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Denon AVR-X3800H	Integra DRX-3.4
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K 48/50/60Hz RGB/YCbCr 4:4:4 12-bit and 4K 100/120Hz RGB/YCbCr 4:4:4 12-bit
Video Signal Upscaling	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	from 1080p and 4K up to 8K 50/60Hz and 4K 50/60Hz
Analog To HDMI Upconversion		Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution		480i/576i
isf Certified Calibration Control

CONNECTIVITY	Denon AVR-X3800H	Integra DRX-3.4
Wi-Fi
Bluetooth	SBC	SBC, AAC, aptX, aptX HD
Bluetooth Headphone Transmission
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
HEOS
DTS Play-Fi		via Integra Music Control App
MHL Input
DLNA 1.5
Domotz Pro Compatible
OvrC Compatible
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App		Integra Remote Control App
InstaPrevue Input Source Prevue

TERMINALS	Denon AVR-X3800H	Integra DRX-3.4
HDMI Inputs	6	7 (1 front)
HDMI Outputs	3 (2 x 8K for MAIN, 1 x 4K for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	6	7
USB Input	1 Front for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	5	7 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.4	9.2 (barter to Zone 3 Pre/Line Out)
XLR Pre-outs
Composite Video Inputs		3 (1 front)
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs		1
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	USB	HDMI, Composite, L/R Audio
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord

ZONES	Denon AVR-X3800H	Integra DRX-3.4
Number of Zones	2	3
Powered Zones	2	2 and 3
Zone 2 Outs	HDMI, Pre Out	HDMI, RCA Pre/Line Out (shared with Zone B Line out)
Zone 3 Outs		RCA Pre/Line Out
RS-232C Interface
+12V Trigger Output	1	3 (A:100 mA, B:25 mA, C:25 mA)
Remote (IR) Input/Output	1 / 1	2 / 1

MISCELLANEOUS	Denon AVR-X3800H	Integra DRX-3.4
On-Screen Display	Advanced Graphic User Interface	High-definition GUI over HDMI
GUI Languages	3	9
Web Control
IP Control
Control4 SDDP
PreAmp Mode
Display	1 line
Remote Controller	RC-1253
Pre-programmed / Learnable / LCD Display	/ /
Denon Link HD
Setup Assistant
Quick Select plus / Quick Select	/

RADIO	Denon AVR-X3800H	Integra DRX-3.4
Analog Tuner	FM/AM	FM/AM
Presets		40
Digital Radio
Internet Radio	TuneIn	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Denon AVR-X3800H	Integra DRX-3.4
Front Panel	not Metal	Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
Speaker Terminals	11	9
Large Speaker Terminals	11	9
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals
Rack Mount Kit Available		IRK-155-3D

POWER	Denon AVR-X3800H	Integra DRX-3.4
Power Supply	AC 120 V, 60 Hz	AC 120 V, 60 Hz
H.C.P.S. (High Current Power Supply)		Massive High Power Transformer
Toroidal Transformer
Power Consumption	660 W	750 W
No Sound Power	ECO On/Off: 60 W/100 W
Standby Power	0.1 W	0.1 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Denon AVR-X3800H	Integra DRX-3.4
Dimensions (W x H x D)	434 mm x 167 mm x 389 mm (with antenna: 434 mm x 236 mm x 389 mm) 17 1/8" x 6 5/8" x 15 3/8" (with antenna: 17 1/8" x 9 3/8" x 15 3/8")	435 mm x 174 mm x 376.5 mm 17-1/8" x 6-7/8" x 14-13/16"
Dimensions of Package (W x H x D)	519 mm x 242 mm x 478 mm 21.2" x 10.1" x 19.0"	560 mm x 305 mm x 467 mm 22-1/16" x 12" x 18-3/8"
Weight	12.5 kg (27.6 lbs)	11 kg (24.3 lbs)
Weight of Package	15.1 kg (33.3 lbs)	13.5 kg (29.8 lbs)

SPECIFICATIONS	Denon AVR-X3800H	Integra DRX-3.4
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	105 W (0.08% THD)	100 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	135 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	215 W (10% THD)	225 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	180 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)		250 W
Dynamic Power per Channel (4 Ω, Front)		220 W
Dynamic Power per Channel (8 Ω, Front)		130 W
THD		0.08% (20 Hz - 20 kHz, half power)
THD (Digital)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.008% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)		3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/470 Ω
Rated Lineout Level and Impedance	1.2 V
Rated Output digital	2 V (at 0 dB playback)
Rated Headphone Jack Output Level and Impedance		8 Ω - 600 Ω
Rated Headphone Power Output		85 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	100 dB	106 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	80 dB
S/N Ratio (digital)	102 dB
Dynamic Range (digital)	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	10 Hz - 100 kHz/+1 dB, -3 dB (Direct)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance		1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n/ac	IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	4․2	4․2
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	Ver. 2.0, 5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 2.8 µV (20.2 dBf)	Mono: 1.0 µV (11.2 dBf)
FM Effective Sensitivity	1.2 µV (12.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%
AM Frequency	520 kHz - 1710 kHz	530 kHz - 1710 kHz
AM Effective Sensitivity	18 µV
Warranty	3 Years	3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted