Denon AVC-X8500H vs Integra DRX-7.3

Here we are comparing Denon AVC-X8500H to Integra DRX-7.3 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVC-X8500H has 13 channel and the Integra DRX-7.3 has 9 channel amplifiers.

Denon AVC-X8500H	Integra DRX-7.3
Denon AVC-X8500H was introduced in 2018 and represented a flagship model of a manufacturer. It is equipped with 13 channel amplifier with 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 13.2 maximum channel processing. It supports Dolby Atmos, DTS:X Pro and Auro-3D, passes 4K/60Hz and upscales up to 4K 50/60Hz 4:4:4 video signal.	Integra DRX-7.3 was introduced in 2019 and represented a flagship model of a manufacturer. It is equipped with 9 channel amplifier with 135 W (8 Ω, 1 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Denon AVC-X8500H and Integra DRX-7.3 and gave them scores of 94 and 92 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Denon AVC-X8500H over Integra DRX-7.3.

	Denon AVC-X8500H	vs	Integra DRX-7.3
More Channels	13.2	vs	9.2
Higher Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	135 W (8 Ω, 1 kHz, 2 channel driven)
Front Wide Channel Support		vs
Bi-amp capability	5-ch (assignable)	vs
More Channel Processing	13.2	vs	11.2
Dolby Digital EX		vs
DTS:X	Pro up to 7.1.6 or 9.1.4	vs
DTS Virtual:X	via firmware update	vs
Auro 3D with Auro-Matic Upmixer	13.1-ch (Built-In)	vs
Dialog Enhancement		vs
Audyssey Dynamic EQ		vs
Audyssey Dynamic Volume		vs
Audyssey LFC		vs
Audyssey Sub EQ HT		vs
Auto Low Latency Mode Pass-through		vs
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	vs	1080p to 4K
Component Video Maximum Resolution	1080p	vs	480i/576i
isf Certified Calibration Control		vs
AirPlay	AirPlay 2	vs	AirPlay 2
More HDMI Inputs	8 (1 front)	vs	7 (1 front)
USB DC Out Port		vs
More RCA Line Inputs	7	vs	6
Multi-Channel Input	7.1	vs
More RCA Pre-Outs	15.2	vs	11.2
More Composite Video Inputs	4	vs	2
More Composite Video Outputs	1	vs
More Component Video Inputs	3	vs	2
More Component Video Outputs	1	vs
Front A/V Inputs	HDMI, USB	vs	HDMI
Zone 2 Outs	HDMI, Composite, Pre Out	vs	HDMI, RCA Pre/Line Out
Zone 3 Outs	Pre Out, Composite	vs	RCA Pre/Line Out
Napster		vs
More Speaker Terminals	15	vs	11
More Large Speaker Terminals	15	vs	11
Color-Coded Speaker Terminals		vs
Bigger Power Supply	900 W	vs	310 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	260 W (10% THD)	vs	255 W (10% THD)

This section shows those features and specifications which are the reason to choose Integra DRX-7.3 over Denon AVC-X8500H.

	Denon AVC-X8500H	vs	Integra DRX-7.3
THX™ Certification		vs	Select™ (previously known as Select2)
Higher DAC Specs	384 kHz/32 Bit	vs	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	vs	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC
HDBaseT Compatible		vs	In: 1 Out: 1 RS-232: 1 (Pasth through) IR In: 1 (Path through) IR Out: 1 (Path through) Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Newer HDCP Version	2.2	vs	2.3
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi		vs
More Optical Inputs	2	vs	3
Remote (IR) Input/Output	1 / 1	vs	3 / 2
Analog Tuner		vs	FM/AM
Pandora		vs
Higher S/N Ratio (Line, IHF-A)	102 dB	vs	107 dB
Higher S/N Ratio (Phono MM, IHF-A)	74 dB	vs	90 dB
Higher DSD Sampling Rate via USB	5.6 MHz, 2.8 MHz	vs	2.8 MHz, 5.6 MHz, 11.2 MHz
Wi-Fi Standard	IEEE 802.11 a/b/g/n	vs	IEEE 802.11 a/b/g/n/ac
Newer Bluetooth Version	3․0 + EDR	vs	4․2

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Denon AVC-X8500H	Integra DRX-7.3
High Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 1 kHz, 2 channel driven)
Channel Processing	13.2	11.2
Dolby Atmos	up to 7.1.6 or 9.1.4
Dolby Atmos Height Virtualization
DTS:X	Pro up to 7.1.6 or 9.1.4
IMAX Enhanced
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	AccuEQ Advance Plus 9-point calibration with subwoofer EQ and AccuReflex™
HDR10
Dolby Vision
eARC
New HDCP Version	2.2	2.3
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Wi-Fi
Bluetooth	SBC	SBC, AAC
Works with Amazon Alexa
Many HDMI Inputs	8 (1 front)	7 (1 front)
Many HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (1 Main, 1 Sub, 1 Zone2)
USB Input	1 Front for USB memory	1 (Rear)
Many RCA Line Inputs	7	6
Phono Input
RCA Pre-Outs	15.2	11.2
Composite Video Inputs	4	2
Component Video Inputs	3	2
Ethernet
Zones	3	3
Spotify
Tidal

WEAKNESSES	Denon AVC-X8500H	Integra DRX-7.3
No HDR10+
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Few 8K Inputs
No Digital Radio

Denon AVC-X8500H	Integra DRX-7.3
13 channel Amplifier: Denon AVC-X8500H features 13 channel power amplifier. It is rated at 150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	9 channel Hybrid Digital High-Current Amplifier: Integra DRX-7.3 features 9 channel power amplifier. It is rated at 135 W (8 Ω, 1 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

THX™ Select™ (previously known as Select2) certification

Integra DRX-7.3 is THX™ Select™ (previously known as Select2) certified. This means that it is ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Denon AVC-X8500H	Integra DRX-7.3
Channels	13.2	9.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 1 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	5-ch (assignable)

Denon AVC-X8500H's and Integra DRX-7.3's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Denon AVC-X8500H: 5.2.2, 5.2.4, 5.2.6, 7.2.2, 7.2.4, 7.2.6, 9.2.2, 9.2.4 with internal amplifier.
Integra DRX-7.3: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Denon AVC-X8500H: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 5.2.6, 7.2.2, 7.2.4, 7.2.6, 9.2.2, 9.2.4 with internal amplifier.
Integra DRX-7.3: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Denon AVC-X8500H: 5.2, 7.2, 9.2 with internal amplifier.
Integra DRX-7.3: 5.2, 7.2 with internal amplifier.
• Front Wide Channel support: With the presence of two front wide speakers you can enhance the front surround stage. The following speaker configurations are available for front wide channels:
Denon AVC-X8500H: 9.2, 9.2.2, 9.2.4.
Integra DRX-7.3: Does not support.
• Bi-Amp: Denon AVC-X8500H is able to bi-amp up to 5 and Integra DRX-7.3 is able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Denon AVC-X8500H and Integra DRX-7.3 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Both models support Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Denon AVC-X8500H and Integra DRX-7.3 support DTS:X.

• DTS:X Pro: Denon AVC-X8500H supports DTS:X Pro which is an upgraded version of DTS:X and is no longer limited with 11 channel processing.
• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Denon AVC-X8500H supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Denon AVC-X8500H supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Denon AVC-X8500H and Integra DRX-7.3 are IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Denon AVC-X8500H	Integra DRX-7.3
Dolby Atmos	up to 7.1.6 or 9.1.4
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	Pro up to 7.1.6 or 9.1.4
DTS Neural:X
DTS Virtual:X	via firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	13.1-ch (Built-In)

Denon AVC-X8500H comes with 8 HDMI inputs. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

Integra DRX-7.3 comes with 7 HDMI inputs. It has 3 outputs - 1 Main and 1 Sub and 1 Zone2.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling on Denon AVC-X8500H: It can upscale up to 4K 50/60Hz 4:4:4 from HDMI and analog sources.
  4K Upscaling on Integra DRX-7.3: It can upscale 1080p to 4K from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP Copy Protection: Denon AVC-X8500H is HDCP 2.2 and Integra DRX-7.3 is HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Denon AVC-X8500H and Integra DRX-7.3 support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Denon AVC-X8500H supports Auto Low Latency Mode (ALLM) for lag-free and smooth gaming.

VIDEO FEATURES	Denon AVC-X8500H	Integra DRX-7.3
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible		In: 1 Out: 1 RS-232: 1 (Pasth through) IR In: 1 (Path through) IR Out: 1 (Path through) Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	1080p to 4K

TERMINALS	Denon AVC-X8500H	Integra DRX-7.3
HDMI Inputs	8 (1 front)	7 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (1 Main, 1 Sub, 1 Zone2)
8K Inputs
USB Input	1 Front for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	3
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	7	6
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1
RCA Pre-Outs	15.2	11.2
XLR Pre-outs
Composite Video Inputs	4	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	3	2
Component Video Outputs	1

GENERAL	Denon AVC-X8500H	Integra DRX-7.3
Brand	Denon	Integra
Model	AVC-X8500H	DRX-7.3
Type	A/V Amplifier	A/V Receiver
Country	UK	North America
Release Year	2018	2019
Predecessor	Denon AVR-X7200WA	Integra DRX-7.1
Successor	Denon AVC-X8500HA	Integra DRX-8.4

AMPLIFIER	Denon AVC-X8500H	Integra DRX-7.3
Channels	13.2	9.2
Power Output	150 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	135 W (8 Ω, 1 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design		Hybrid Digital Low-Impedance, High-Current Amplifier
Discrete Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		All Channels
Optimum Gain Volume Circuitry
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Mono Block Power Amplifier Construction	L/R separated
Bi-amp Capability	5-ch (assignable)

AUDIO FEATURES	Denon AVC-X8500H	Integra DRX-7.3
Digital Signal Processing (DSP) Engine	Four powerful high speed 4th generation SHARC DSP processors with 32-bit floating point
DAC	AKM AK4490EQ	AKM AK4490 Stereo DAC for Front L/R 2 AKM AK4458 Multichannel DACs for Other Channels 2 AKM AK4388 Stereo DACs for Zone 2 and Zone 3
DAC Specs	384 kHz/32 Bit	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3
Maximum Channel Processing	13.2	11.2
D.D.S.C. HD Digital	32 bit
Alpha Processing	AL32 Processing Multichannel
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.6 or 9.1.4
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X	Pro up to 7.1.6 or 9.1.4
DTS Neural:X
DTS Virtual:X	via firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	13.1-ch (Built-In)
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Tone Control		All Channels
Compressed Music Enhancer		Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Pure Direct Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Denon AVC-X8500H	Integra DRX-7.3
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	AccuEQ Advance Plus 9-point calibration with subwoofer EQ and AccuReflex™
Audyssey App Support
Standing Wave Control		Standing Wave EQ
Distance Adjustment		0.1 - foot
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Denon AVC-X8500H	Integra DRX-7.3
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible		In: 1 Out: 1 RS-232: 1 (Pasth through) IR In: 1 (Path through) IR Out: 1 (Path through) Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	1080p to 4K
Analog To HDMI Upconversion	Component, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	1080p	480i/576i
isf Certified Calibration Control

CONNECTIVITY	Denon AVC-X8500H	Integra DRX-7.3
Wi-Fi
Bluetooth	SBC	SBC, AAC
Bluetooth Headphone Transmission
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
Domotz Pro Compatible
Remote Monitoring with ihiji
OvrC Compatible
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire	Integra Remote Control App
InstaPrevue Input Source Prevue

TERMINALS	Denon AVC-X8500H	Integra DRX-7.3
HDMI Inputs	8 (1 front)	7 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (1 Main, 1 Sub, 1 Zone2)
8K Inputs
USB Input	1 Front for USB memory	1 (Rear)
USB DC Out Port
Optical Inputs	2	3
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	7	6
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1
RCA Pre-Outs	15.2	11.2
XLR Pre-outs
Composite Video Inputs	4	2
Composite Video Outputs	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	3	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB	HDMI
Speaker A/B	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord		Oversized AC Cord

ZONES	Denon AVC-X8500H	Integra DRX-7.3
Number of Zones	3	3
Powered Zones	2 and 3	2 and 3
Zone 2 Outs	HDMI, Composite, Pre Out	HDMI, RCA Pre/Line Out
Zone 3 Outs	Pre Out, Composite	RCA Pre/Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	2	2 (A:100 mA, B:25 mA)
Remote (IR) Input/Output	1 / 1	3 / 2

MISCELLANEOUS	Denon AVC-X8500H	Integra DRX-7.3
On-Screen Display	Advanced Graphic User Interface	High-definition transparent overlaid GUI with Quick Menu and Home Menu
GUI Languages	9	9
Web Control
IP Control
Control4 SDDP
PreAmp Mode
Display	2 lines
Remote Controller	RC-1221
Pre-programmed / Learnable / LCD Display	/ /
RIHD (Remote Interactive Over HDMI)
Smart Grid-Ready
Denon Link HD
Setup Assistant
Quick Select plus / Quick Select	/

RADIO	Denon AVC-X8500H	Integra DRX-7.3
Analog Tuner		FM/AM
Presets		40
Digital Radio
Internet Radio	TuneIn	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Denon AVC-X8500H	Integra DRX-7.3
Front Panel	Metal	Audiophile Grade Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
Speaker Terminals	15	11
Large Speaker Terminals	15	11
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals
Rack Mount Kit Available		IRK-180-4C

POWER	Denon AVC-X8500H	Integra DRX-7.3
Power Supply	AC 230 V, 50/60 Hz	AC 120 V, 60 Hz
Independent Power Supply		2
H.C.P.S. (High Current Power Supply)		Massive Custom Transformer
Toroidal Transformer
Power Consumption	900 W	310 W
No Sound Power	ECO On/Off: 70 W/125 W
Standby Power	0.1 W	0.2 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Denon AVC-X8500H	Integra DRX-7.3
Dimensions (W x H x D)	434 mm x 195 mm x 482 mm (with antenna: 434 mm x 259 mm x 482 mm) 17-1/8" x 7-3/4" x 18-3/4" (with antenna up: 17-1/8" x 10-1/4" x 18-3/4")	435 mm x 197 mm x 446.5 mm 17-1/8" x 7-3/4" x 17-9/16"
Dimensions of Package (W x H x D)	569 mm x 328 mm x 539 mm	565 mm x 325 mm x 547 mm 22-1/4" x 12-13/16" x 21-9/16"
Weight	23.3 kg (51 lbs 6 oz)	16.5 kg (36.4 lbs)
Weight of Package		19.0 kg (41.9 lbs)

SPECIFICATIONS	Denon AVC-X8500H	Integra DRX-7.3
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	150 W (0.05% THD)
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)		135 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	190 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	260 W (10% THD)	255 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	210 W (1% THD)
Multi Channel Simultaneous Drive		760 W (8 Ω, 1 kHz, 1.0%)
Dynamic Power per Channel (4 Ω, Front)	280 W x 2-channel
Dynamic Power per Channel (8 Ω, Front)	170 W x 2-channel
THD		0.05% (1 kHz, 100 W, 8 Ω)
THD (Digital)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.005% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/82 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)	2.5 mV	3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/470 Ω
Rated Lineout Level and Impedance	1.2 V
Rated Output digital	2 V (at 0 dB playback)
Rated Headphone Jack Output Level and Impedance		43 Ω
Rated Headphone Power Output		57 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	102 dB	107 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	90 dB
S/N Ratio (digital)	102 dB
Dynamic Range (digital)	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz to 60 MHz, 0 dB/-3 dB (Component) 5 Hz to 10 MHz, 0 dB/-3 dB (Composite)
Ethernet Standard	100BASE-TX	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n	IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	3․0 + EDR	4․2
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	Ver. 2.0, 5 V, 1 A
FM Frequency		87.5 MHz - 107.9 MHz
AM Frequency		530 kHz - 1710 kHz
Warranty	3 Years	3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted