Arcam AVR5 vs Yamaha RX-V583

Here we are comparing Arcam AVR5 to Yamaha RX-V583 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 7 channel amplifiers.

Arcam AVR5	Yamaha RX-V583
Arcam AVR5 was introduced in 2021. It is equipped with 7 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.1 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 4K/60Hz video signal.	Yamaha RX-V583 was introduced in 2017. It is equipped with 7 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales up to 4K 60p 4:4:4 video signal.

We evaluated Arcam AVR5 and Yamaha RX-V583 and gave them scores of 87 and 80 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Arcam AVR5 over Yamaha RX-V583.

	Arcam AVR5	vs	Yamaha RX-V583
Certified 4 Ω Performance		vs
More Channel Processing	11.1	vs	7.1
Dolby Atmos Height Virtualization		vs
DTS Virtual:X		vs
IMAX Enhanced		vs
Auro 3D with Auro-Matic Upmixer	11.1-ch (Built-In)	vs
Network Audio Formats	MP3, WMA, AAC, WAV, FLAC, AIFF, ALAC, MQA	vs	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Dialog Normalization		vs
Chromecast Built-In		vs
AirPlay	AirPlay 2	vs	AirPlay
More HDMI Inputs	7	vs	4
More HDMI Outputs	2 (simultaneous)	vs	1
More 8K Inputs	7	vs
More Optical Inputs	2	vs	1
More Optical Outputs	1	vs
More Coaxial Inputs/Outputs	4	vs	2
More RCA Line Inputs	7 (1 front)	vs	4 (1 front)
More RCA Line Outputs	1	vs
More RCA Pre-Outs	11.2	vs	0.2
Detachable Power Cord		vs
RS-232C Interface		vs
+12V Trigger Output	2	vs
Remote (IR) Input/Output	2 / 0	vs	0 / 0
PreAmp Mode		vs
More Presets	50	vs	40
Digital Radio	DAB/DAB+	vs
Universal Power Supply	AC 110-120 V or 220-240 V, 50/60 Hz via switch	vs	AC 230 V, 50 Hz
Bigger Power Supply	1500 W	vs	260 W
Rated Headphone Jack Output Level and Impedance	5 Vrms/100 Ω	vs	100 mV/470 Ω (1 kHz, 50 mV, 8 Ω)
Wi-Fi Standard	IEEE 802.11 ac	vs	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	vs	2.4 GHz
Newer Bluetooth Version	5․0	vs	2․1 + EDR
Longer Warranty	5 Years	vs	2 Years

This section shows those features and specifications which are the reason to choose Yamaha RX-V583 over Arcam AVR5.

	Arcam AVR5	vs	Yamaha RX-V583
DTS Neo		vs	Neo:6
Music Playback via USB		vs	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
DSD via USB		vs	2-ch Input
Dialogue Lift		vs
Newer HDCP Version	2.2	vs	2.3
More Composite Video Inputs		vs	3
More Composite Video Outputs		vs	1
Front A/V Inputs	AUX (3.5 mm Audio)	vs	USB, mini-jack Audio
Analog Tuner	FM with RDS	vs	FM/AM with RDS
Deezer		vs
Napster		vs

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Arcam AVR5	Yamaha RX-V583
Dolby Atmos	up to 7.1.4 with external amp
DTS:X	up to 7.1.4 with external amp
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Dirac Live™	YPAO sound optimization
HDR10
Dolby Vision
eARC		via firmware update
New HDCP Version	2.2	2.3
Wi-Fi		with Wireless Direct
Bluetooth	aptX HD	SBC, AAC
USB Input	for factory service	USB memory, Portable Audio Player
Ethernet
Analog Tuner	FM with RDS	FM/AM with RDS
Pandora
Spotify
Tidal

WEAKNESSES	Arcam AVR5	Yamaha RX-V583
Low Power Output	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
No Front Wide Channel Support
No HDR10+
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p 4:4:4
Does not Work with Amazon Alexa
No Phono Input
No Zones	1	1

Arcam AVR5	Yamaha RX-V583
7 channel Class A/B Amplifier: Arcam AVR5 features 7 channel power amplifier with Class A/B design. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Yamaha RX-V583 features 7 channel power amplifier. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven).

AMPLIFIER	Arcam AVR5	Yamaha RX-V583
Channels	7.2	7.2
Power Output	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability

Arcam AVR5's and Yamaha RX-V583's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Arcam AVR5: 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Yamaha RX-V583: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Arcam AVR5: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Yamaha RX-V583: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Arcam AVR5: 5.2, 7.2 with internal amplifier.
Yamaha RX-V583: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Arcam AVR5 and Yamaha RX-V583 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Arcam AVR5 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Arcam AVR5 and Yamaha RX-V583 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Arcam AVR5 supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Arcam AVR5 supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Arcam AVR5 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Arcam AVR5	Yamaha RX-V583
Dolby Atmos	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	11.1-ch (Built-In)

Arcam AVR5 comes with 7 HDMI 2.1 inputs with 8K support. It has 2 outputs which work parallelly and output the same signal.

Yamaha RX-V583 comes with 4 HDMI inputs. It has 1 output.

• 4K/60Hz Passthrough on Arcam AVR5: All inputs pass up to 4K 50/60Hz 4:4:4 video signal.
  4K/60Hz Passthrough on Yamaha RX-V583: All inputs pass up to 4K/60p 4:4:4 video signal.
• 4K Upscaling on Yamaha RX-V583: It can upscale up to 4K 60p 4:4:4 from HDMI sources.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP Copy Protection: Arcam AVR5 is HDCP 2.2 and Yamaha RX-V583 is HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Arcam AVR5 and Yamaha RX-V583 support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

VIDEO FEATURES	Arcam AVR5	Yamaha RX-V583
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
Enhanced Audio Return Channel (eARC)		via firmware update
HDCP Version	2.2	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p 4:4:4

TERMINALS	Arcam AVR5	Yamaha RX-V583
HDMI Inputs	7	4
HDMI Outputs	2 (simultaneous)	1
8K Inputs	7
USB Input	for factory service	USB memory, Portable Audio Player
USB DC Out Port
Optical Inputs	2	1
Optical Outputs	1
Coaxial Inputs	4	2
RCA Line Inputs	7 (1 front)	4 (1 front)
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs		3
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs
Component Video Outputs

GENERAL	Arcam AVR5	Yamaha RX-V583
Brand	Arcam	Yamaha
Series	HDA
Model	AVR5	RX-V583
Type	A/V Receiver	A/V Receiver
Country	All	UK and Europe
Release Year	2021	2017
Successor		Yamaha RX-V585

AMPLIFIER	Arcam AVR5	Yamaha RX-V583
Channels	7.2	7.2
Power Output	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Class A/B
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability

AUDIO FEATURES	Arcam AVR5	Yamaha RX-V583
Surround:AI™
DAC	ESS 9026PRO	Burr-Brown
DAC Specs	192 kHz/24 Bit	192 kHz/24 Bit
Maximum Channel Processing	11.1	7.1
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo		Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	11.1-ch (Built-In)
MQA Decoding
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, AAC, WAV, FLAC, AIFF, ALAC, MQA	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
Music Playback via USB		MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB		Apple Lossless, WAV, FLAC, AIFF, DSD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB		2-ch Input
DSD to PCM Converter
USB DAC
DTS Dialogue Control
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Compressed Music Enhancer		including enhancer for Bluetooth®
High-resolution Music Enhancer
Adaptive DRC (Dynamic Range Control)
Initial Volume & Maximum Volume Setting
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode	Stereo Direct, CD Direct
Straight Decoding Mode
CINEMA DSP		3D
DSP Programs		17
SILENT CINEMA / Virtual CINEMA DSP		Virtual CINEMA FRONT
Virtual Speakers		including surround back
Independent Subwoofer Outputs

CALIBRATION	Arcam AVR5	Yamaha RX-V583
Auto Speaker Calibration System with Mic.	Dirac Live™	YPAO sound optimization
YPAO Volume

VIDEO FEATURES	Arcam AVR5	Yamaha RX-V583
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.0b
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)		via firmware update
HDCP Version	2.2	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
DSC (Display Stream Compression)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K/60p 4:4:4
Video Signal Upscaling		up to 4K 60p 4:4:4
Analog To HDMI Upconversion
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control

CONNECTIVITY	Arcam AVR5	Yamaha RX-V583
Wi-Fi		with Wireless Direct
Bluetooth	aptX HD	SBC, AAC
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
DTS Play-Fi
MHL Input
DLNA 1.5
MusicCast
AirPlay	AirPlay 2	AirPlay
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Arcam control app	(iPhone® / iPad® / Android™ phone / tablet)
InstaPrevue Input Source Prevue

TERMINALS	Arcam AVR5	Yamaha RX-V583
HDMI Inputs	7	4
HDMI Outputs	2 (simultaneous)	1
8K Inputs	7
USB Input	for factory service	USB memory, Portable Audio Player
USB DC Out Port
Optical Inputs	2	1
Optical Outputs	1
Coaxial Inputs	4	2
RCA Line Inputs	7 (1 front)	4 (1 front)
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs		3
Composite Video Outputs		1
S-Video Inputs
S-Video Outputs
Component Video Inputs
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	AUX (3.5 mm Audio)	USB, mini-jack Audio
Speaker A/B
Headphone Out	3.5 mm (1/8")	6.3 mm (1/4")
Detachable Power Cord
dockport

ZONES	Arcam AVR5	Yamaha RX-V583
Number of Zones	1	1
Zone B Video Output
RS-232C Interface
+12V Trigger Output	2
Remote (IR) Input/Output	2 / 0	0 / 0
Party Mode

MISCELLANEOUS	Arcam AVR5	Yamaha RX-V583
On-Screen Display		color OSD
SCENE		SCENE (4 sets)
Web Control
IP Control
PreAmp Mode
Display	Large front-panel LCD display

RADIO	Arcam AVR5	Yamaha RX-V583
Analog Tuner	FM with RDS	FM/AM with RDS
Presets	50	40
Digital Radio	DAB/DAB+
Internet Radio	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Arcam AVR5	Yamaha RX-V583
A.R.T. Wedge
Speaker Terminals	7	7
Large Speaker Terminals	7	7
Color-Coded Speaker Terminals
Gold plated RCA terminals

POWER	Arcam AVR5	Yamaha RX-V583
Power Supply	AC 110-120 V or 220-240 V, 50/60 Hz via switch	AC 230 V, 50 Hz
Toroidal Transformer
Power Consumption	1500 W	260 W
Standby Power	0.5 W	0.1 W
ECO Mode / Hybrid Standby Function
Auto Power Standby

PHYSICAL	Arcam AVR5	Yamaha RX-V583
Dimensions (W x H x D)	433 mm x 171 mm x 425 mm 17.06" x 6.69" x 18.56"	435 mm x 161 mm x 327 mm (with antenna: 435 mm x 225.5 mm x 327 mm) 17-1/8" x 6-3/8" x 12-7/8" (with antenna up: 17-1/8" x 8-7/8" x 12-7/8")
Weight	16.5 kg (36.4 lbs)	8.1 kg (17.9 lbs)
Weight of Package	19.8 kg

SPECIFICATIONS	Arcam AVR5	Yamaha RX-V583
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	80 W (0.02% THD)
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)	85 W (0.2% THD)
Power Output (6 Ω, 20 Hz - 20 kHz, 2 channel driven)		80 W (0.09% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)		115 W (0.9% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)		135 W (10% THD)
Power Output (4 Ω, 20 Hz - 20 kHz, 2 channel Driven)	100 W (0.2% THD)
Power Output (4 Ω, 1 kHz, 2 channel Driven)	120 W (0.2% THD)
Multi Channel Simultaneous Drive	60 W (7 channels driven, 1kHz, 8 Ω, 0.2% THD) 85 W (7 channels driven, 1kHz, 4 Ω, 0.2% THD)
Dynamic Power per Channel (2 Ω, Front)		190 W
Dynamic Power per Channel (4 Ω, Front)		170 W
Dynamic Power per Channel (6 Ω, Front)		140 W
Damping Factor		100 (Front, 20 Hz - 20 kHz, 8 Ω)
Input Sensitivity and Impedance (Line)	1V, 2V, 4V (user adjustable)/47 kΩ	200 mV/47 kΩ
Maximum Input Sensitivity (Line)	4.5 Vrms	2.3 V (1 kHz, 0.5% THD)
Rated Preout Level and Impedance	0.8 Vrms/560 Ω	1.0 V/1.2 kΩ (Subwoofer)
Rated Headphone Jack Output Level and Impedance	5 Vrms/100 Ω	100 mV/470 Ω (1 kHz, 50 mV, 8 Ω)
S/N Ratio (Line, IHF-A)	93 dB (normal) 110 dB (stereo direct)	110 dB
Frequency Response (Analog In)	±0.2 dB (20 Hz to 20 kHz)	+0/-3 dB (AV 2 etc. to Front, 10 Hz to 100 kHz)
Residual noise (IHF-A Network)	0.15 mV	150 µV (Speaker Out)
Channel Separation at 1 kHz/10 kHz (LINE)		70 dB/50 dB
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB		5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance		1 Vp-p/75 Ω (Composite)
Video Maximum Input		1.5 Vp-p
Video S/N Ratio		50 dB
Ethernet Standard		10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 ac	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz
Bluetooth Version	5․0	2․1 + EDR
Bluetooth Frequency		2.4 GHz
USB Terminal		USB2.0 5 V, 1 A
FM Frequency		87.50 MHz - 108.00 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 3 µV (20.8 dBf)
FM S/N Ratio		Mono/Stereo: 65 dB/64 dB
FM Harmonic Distortion (IHF, 1 kHz)		Mono/Stereo: 0.5%/0.6%
AM Frequency		531 kHz - 1611 kHz
Warranty	5 Years	2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted