Pioneer Elite SC-LX801

Pioneer Elite SC-LX801 was introduced in 2017. It is equipped with 9 channel amplifier with 140 W (8 Ω, 1 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales up to 4K/60p (YCbCr 4:4:4) video signal.

We evaluated the a/v receiver and gave 91 overall score out of 100. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluation section.

In this section we present pros and cons of Pioneer Elite SC-LX801.

In 2017 Pioneer released 14 new receivers. Here is the lineup:

You can view their side-by-side comparison here: Pioneer SC-LX502 vs VSX-LX302 vs VSX-LX102 vs VSX-932 vs VSX-832 vs VSX-532.

Pioneer Elite SC-LX801 has replaced SC-97. Here we present differences between these two models.

UPGRADES	Pioneer Elite SC-LX801	vs	Pioneer SC-97
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD, Dolby TrueHD	vs	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, AAC, DSD, Dolby TrueHD	vs	Apple Lossless, WAV, FLAC, AIFF, DSD
Reflex Optimizer		vs
BT.2020 color space		vs
Dolby Vision		vs
Analog To HDMI Upconversion	Component**, Composite	vs	Component****, Composite
Chromecast Built-In		vs
Works with SONOS		vs
DTS Play-Fi		vs
More Optical Inputs	3	vs	2
More RCA Line Inputs	6	vs	3
More Component Video Outputs	1	vs
Zone 2 Outs	HDMI, RCA Pre/Line Out	vs	RCA Pre/Line Out
PreAmp Mode		vs
Tidal		vs
Deezer		vs
Higher Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	200 W (1.0% THD)	vs	190 W (1.0% THD)
Higher Power Output (4 Ω, 1 kHz, 2 channel Driven)	255 W (1.0% THD)	vs	240 W (1.0% THD)
Higher S/N Ratio (Line, IHF-A)	108 dB	vs	103 dB
Higher DSD Sampling Rate via USB	11.2 MHz, 5.6 MHz, 2.8 MHz	vs	5.6 MHz, 2.8 MHz
Newer Bluetooth Version	4․1 + LE	vs	2․1 + EDR
Wider AM Frequency Range	530 kHz - 1710 kHz	vs	530 kHz - 1700 kHz
Longer Warranty	3 Years Parts & Labor	vs	2 Years Parts & Labor

DOWNGRADES	Pioneer Elite SC-LX801	vs	Pioneer SC-97
Front Wide Channel Support		vs
Bi-amp capability		vs	Front, Center, Surround, SP-B
Dolby Digital EX		vs
DTS Neo		vs	Neo:X (before firmware update)
DSD to PCM Converter		vs
Sound Retriever AIR		vs
Digital Noise Reduction		vs
High-resolution Music Enhancer		vs	Hi-bit32 Audio Processing
Optimum Surround		vs
Headphone Surround		vs
Virtual Speakers		vs	(Surround Back/Height/Wide)
Higher MCACC Memory	3	vs	6
Stream Smoother		vs
Pure Cinema		vs
Video Parameter Adjustments		vs	YNR, CNR, BNR, MNR, Detail, Brightness, Contrast, Hue, Chroma, Black Level
MHL Input		vs	1 Rear (Version 2.0)
DLNA 1.5		vs
Less HDMI Outputs	2 (1 MAIN, 1 SUB/ZONE 2)	vs	3 (2 for MAIN, 1 for MAIN/HDZONE)
Less Optical Outputs		vs	1
Less RCA Line Outputs		vs	1
Less RCA Pre-Outs	11.2	vs	13.2
Less Composite Video Outputs		vs	2
Less Zones	3	vs	4
Less Powered Zones	2 and 3	vs	2, 3 and HDZone
On-Screen Display	Icon-based Graphical User Interface (GUI)	vs	Graphical User Interface (GUI) with Album Artwork (HDMI only)
AVNavigator		vs	Built-in
Less Presets	40	vs	63
Smaller Power Supply	320 W	vs	370 W
Lower Multi Channel Simultaneous Drive (8 Ω, 1 kHz, 1.0%)	770 W (8 Ω, 1 kHz, 1.0%)	vs	810 W (8 Ω, 1 kHz, 1.0%)

For more detailed comparison between the models please visit Pioneer Elite SC-LX801 vs SC-97.

Pioneer Elite SC-LX801's 9 channel amplifier can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
5.2.2, 5.2.4, 7.2.2 with internal amplifier.
7.2.4 with addition of external 2 channel amplifier.
• DTS:X Configurations: The speaker configurations for DTS:X are the same as for Dolby Atmos:
5.2.2, 5.2.4, 7.2.2 with internal amplifier.
7.2.4 with addition of external 2 channel amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Pioneer Elite SC-LX801 allows you to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Pioneer Elite SC-LX801 supports Dolby Atmos with Surround Upmixer.

• Surround Upmixer: If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Pioneer Elite SC-LX801 supports DTS:X with Neural:X.

• Neural:X is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.

DECODING
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Pioneer Elite SC-LX801 features 8 HDMI inputs. It has 2 outputs: 1 MAIN and 1 SUB/ZONE 2.

• 4K/60Hz Passthrough: All inputs pass up to 4K/60p (YCbCr 4:4:4) video signal.
• 4K Upscaling: Pioneer Elite SC-LX801 can upscale up to 4K/60p (YCbCr 4:4:4) from HDMI sources.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35%.
• HDCP 2.2 Copy Protection: All inputs and outputs are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Pioneer Elite SC-LX801 is able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Pioneer Elite SC-LX801 supports HDR (high dynamic range) video formats such as HDR10 and Dolby Vision via HDMI ports. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

VIDEO FEATURES
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (YCbCr 4:4:4)
Video Signal Upscaling	up to 4K/60p (YCbCr 4:4:4)

Pioneer Elite SC-LX801 comes with MCACC Pro room correction system and includes the calibration microphone.

• MCACC: Pioneer’s exclusive Multi-Channel Acoustic Calibration System (MCACC) delivers an easy-to-use, automatic sound adjustment system to precision-tune your Pioneer and Pioneer Elite receivers with minimal effort. Every MCACC system comes with a microphone to measure and analyze reverb characteristics. The equalizer optimally adjusts sound parameters to fit the size and shape of your home environment while maintaining the integrity of high-resolution playback without any degradation to the quality of your music.

Pioneer Elite SC-LX801 offers multi-zone playback which allows you to play different input sources in 3 different rooms.

Zone 2

• Powered Zone 2: You can use the unit's 2 amplifier channels by connecting Zone 2 speakers directly to the speaker terminals. The remaining 7 channels will be left for main zone amplification.
• HDMI Output: Pioneer Elite SC-LX801 offers HDMI output for Zone 2. This means that it can send two different HDMI signals to two displays.
• Audio Pre/Line Output: If you have a dedicated amplifier for Zone 2 you can connect it to the a/v receiver via pre/line outs and use "pre out" option to control volume from the a/v receiver or use "line out" option - send fixed signal and then control volume on the Zone 2 amplifier.

Zone 3

• Powered Zone 3: You can use the unit's 2 amplifier channels by connecting Zone 3 speakers directly to the speaker terminals. The remaining 7 channels will be left for main zone amplification.
• Audio Pre/Line Output: If you have a dedicated amplifier for Zone 2 you can connect it to the a/v receiver via pre/line outs and use "pre out" option to control volume from the a/v receiver or use "line out" option - send fixed signal and then control volume on the Zone 3 amplifier.

Audio

• Phono Input: There is an MM phono input with built-in phono stage for connecting the moving magnet cartridge output of the turntable directly to the a/v receiver.
• Analog Pre-Outs: Pioneer Elite SC-LX801 has 11.2 preamplifier outputs which allow you to connect the a/v receiver to the external power amplifier. You may want to use a high quality external amplifier for certain channels, usually for front L/R and center, and use the a/v receiver to power the rest. Also, Pioneer Elite SC-LX801 has 11 channel processing but has only 9 channel amplifier, so it needs the external amplifier connected to the analog pre-outs in order to reach the maximum speaker configuration.
• Analog Line Inputs: There are 6 line inputs for analog audio connection.
• Digital Inputs: 3 optical inputs and 2 coaxial inputs are available for digital audio connection.
• Headphone Output: There is a 6.3 mm (1/4") headphone output jack on the front panel.

Video

• HDMI:
Inputs: 8 (1 front)   Outputs: 2 (1 MAIN, 1 SUB/ZONE 2)
8K Inputs: 0
• Composite Video: Connect you VCR, Laserdisc player and other old video equipment with composite video cables.
Inputs: 2   Outputs: 0
• Component Video: Component video connection gives you the higher quality video compared to the composite video connection. So in case your old DVD player and other equipment do not have an HDMI output but have Component video output use this connection over the composite one. Pioneer Elite SC-LX801 supports up to 1080i resolution on Component video connectors.
Inputs: 2   Outputs: 1

Front A/V Inputs

• HDMI, USB

GENERAL
Brand	Pioneer
Series	Elite
Model	SC-LX801
Type	A/V Receiver
Country	North America
Release Year	2017
Predecessor	Pioneer SC-97

AMPLIFIER
Channels	9.2
Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Class D3 (Direct Energy HD)
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability

AUDIO FEATURES
Digital Signal Processing (DSP) Engine	Cirrus Logic (Quad Core) x 1
DAC	ESS SABRE32 Ultra (ES9016S)
DAC Specs	192 kHz/32 Bit
Maximum Channel Processing	11.2
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	64, 88.2, 96, 176.4, 192 kHz/24 bit
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, AAC, DSD, Dolby TrueHD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input
DSD via USB	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction	PQLS & PQFA
Dialog Enhancement
Dialog normalization
Dialogue Lift	via Dialog Enhancement
Sound Retriever	Advanced
Sound Retriever AIR
Digital noise Reduction
Tone Control	All Channels
Compressed Music Enhancer	Advanced Sound Retriever
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Direct Mode
Auto Surround
Optimum Surround
Advanced Surround	11 + 1
Wide Surround
Front Stage Surround Advance
Headphone Surround
Virtual Speakers
Virtual Depth
Independent Subwoofer Outputs

CALIBRATION
Auto Speaker Calibration System with Mic.	MCACC Pro
Manual MCACC
MCACC Memory	3
Reflex Optimizer
Phase Control
Auto Phase Control Plus
Full Band Phase Control
Standing Wave Control
EQ Bands	9-Band
Symmetric EQ
X-Curve
Distance Adjustment	0.5 feet
Precision Distance
Polarity Check
Auto Subwoofer Crossover

VIDEO FEATURES
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (YCbCr 4:4:4)
Video Signal Upscaling	up to 4K/60p (YCbCr 4:4:4)
Analog To HDMI Upconversion	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	1080i
Stream Smoother
Pure Cinema
Video Parameter Adjustments
Super Resolution
isf Certified Calibration Control

CONNECTIVITY
Wi-Fi
Bluetooth	SBC, AAC
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS
DTS Play-Fi
MHL Input
DLNA 1.5
AirPlay	AirPlay
Apple Product Connection	Made for iPhone, iPod and iPad (Airplay only)
Remote App	iControlAV5 (for iOS and Android)
InstaPrevue Input Source Prevue

TERMINALS
HDMI Inputs	8 (1 front)
HDMI Outputs	2 (1 MAIN, 1 SUB/ZONE 2)
8K Inputs
USB Input	1 Front
USB DC Out Port
Optical Inputs	3
Optical Outputs
Coaxial Inputs	2
RCA Line Inputs	6
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2
XLR Pre-outs
Composite Video Inputs	2
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	2
Component Video Outputs	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB
Speaker A/B
Headphone Out	6.3 mm (1/4")
Detachable Power Cord
adapterport

ZONES
Number of Zones	3
Powered Zones	2 and 3
Zone 2 Outs	HDMI, RCA Pre/Line Out
Zone 3 Outs	RCA Pre/Line Out
RS-232C Interface
+12V Trigger Output	2 (A: 100 mA, B: 25 mA)
Remote (IR) Input/Output	2 / 1

MISCELLANEOUS
On-Screen Display	Icon-based Graphical User Interface (GUI)
GUI Languages	7
AV Navigator
IP Control
PreAmp Mode
Versatile Speaker Configuration	Surround Back/Height 1/Height 2/Speaker B/Bi-Amp/Zone 2/Zone 3
FL Dimmer
Function Rename

RADIO
Analog Tuner	FM/AM
Presets	40
Digital Radio
Internet Radio	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION
Front Panel	Brushed
Solid Aluminum Front
Construction	Advanced Direct Construction
Speaker Terminals	11
Large Speaker Terminals	11
Color-Coded Speaker Terminals
3D Space Frame Construction
Gold plated RCA terminals

POWER
Power Supply	AC 120 V, 60 Hz
Low Leakage Flux Power Transformer
Transformer Stabilizer
Power Consumption	320 W
No Sound Power	90 W
Standby Power	0.15 W
Auto Power Standby
Auto Power off

PHYSICAL
Dimensions (W x H x D)	435 mm x 185 mm x 441 mm 17-1/8" x 7-5/16" x 17-1/3"
Weight	17.9 kg (39.5 lbs)

SPECIFICATIONS
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)	140 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	200 W (1.0% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)	200 W (1% THD)
Power Output (4 Ω, 1 kHz, 2 channel Driven)	255 W (1.0% THD)
Rated Power Output (4 Ω, 1 kHz, 1 channel Driven)	280 W (1% THD)
Maximum Power Output (4 Ω, 1 kHz, 1 channel Driven)	340 W (10% THD)
Multi Channel Simultaneous Drive	770 W (8 Ω, 1 kHz, 1.0%)
THD	0.04% (1 kHz, 100 W)
Input Sensitivity and Impedance (Line)	200 mV/82 kΩ
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ
Rated Preout Level and Impedance	1 V/470 kΩ
Rated Headphone Jack Output Level and Impedance	43 Ω
Rated Headphone Power Output	57 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz, 0.5%)
S/N Ratio (Line, IHF-A)	108 dB
S/N Ratio (Phono MM, IHF-A)	90 dB
DSD Sampling Rates via HDMI	2.8 MHz
DSD Sampling Rates via USB	11.2 MHz, 5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/PR) 1 Vp-p/75 Ω (Composite)
Ethernet Standard	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz
Bluetooth Version	4․1 + LE
Bluetooth Frequency	2.4 GHz
HDMI Output Type	5 V, 55 mA
USB Terminal	USB2.0 (Type A) 5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz
AM Frequency	530 kHz - 1710 kHz
Warranty	3 Years Parts & Labor

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted