1-on-1 Comparison

Side-by-Side Comparison

Onkyo TX-NR414 (USA version)

SCORE:
66

Highlights

  • 5.1 channels
  • 5.1 channel processing
  • 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • 1080p Passthrough
  • DLNA
  • Ethernet, Wi-Fi
  • USB input

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Content

Overview

Onkyo TX-NR414 was introduced in 2012. It is equipped with 5 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 5.1 maximum channel processing. It passes 1080/60p video signal.

We evaluated the a/v receiver and gave 66 overall score out of 100. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

AMPLIFIER
75
VIDEO FEATURES
46
AUDIO FEATURES
67
CONNECTIVITY
73
MULTIZONE
64
MISCELLANEOUS
56
RADIO
90
OVERALL
66

Pros and Cons

In this section we present pros and cons of Onkyo TX-NR414.

PROS
  DSD via HDMI
  New HDCP Version
  Ethernet
  Wi-Fi
  USB Input
  Many Analog Audio Line Inputs
  Composite Video Inputs
  Component Video Inputs
  Zones
  Analog Tuner
  Pandora
  Spotify
CONS
  5.1 Channel Processing
  No Dolby Atmos
  No Dolby Atmos Height Virtualization
  No DTS:X
  No IMAX Enhanced
  No Auro 3D with Auro-Matic Upmixer
  No Auto Speaker Calibration System with Mic.
  No eARC
  No HDR10
  No HDR10+
  No Dolby Vision
  No 4K or 8K Video Passthrough
  No 4K or 8K Video Upscaling
  No Chromecast Built-In
  Does not Work with Amazon Alexa
  No Bluetooth
  Few HDMI Outputs
  Few 8K Inputs
  No Phono Input
  No Analog Pre-Outs
  No Tidal

Audio Section

5 channel Amplifier

Onkyo TX-NR414 features 5 channel power amplifier. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven).

  • WRAT (Wide Range Amp Technology): Onkyo TX-NR414 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.

Speaker Configurations

Onkyo TX-NR414's 5 channel amplifier can be assigned for different speaker configurations.

  • Configurations: Available configurations are:
  • 5.1 with internal amplifier.

Sound Processing

  • Advanced Music Optimizer: Compressed music enhancement in Onkyo TX-NR414 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.

Video Section

HDMI

Onkyo TX-NR414 features 6 HDMI inputs. It has 1 output.

  • 1080/60p Passthrough: All inputs pass up to 1080p video signal.
  • HDCP 2.2 Copy Protection: All inputs and outputs are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
  • 3D Ready: Onkyo TX-NR414 is able to pass 3D video through HDMI.

Multi-zone Playback

Onkyo TX-NR414 offers multi-zone playback which allows you to play different input sources in 2 different rooms.


Zone 2

  • Audio Line Output: If you have a dedicated integrated amplifier for Zone 2 you can connect it to the a/v receiver via line outs by sending fixed signal and then control volume on the Zone 2 amplifier.

Inputs and Outputs

Audio

  • Analog Line Inputs: There are 6 line inputs for analog audio connection.
  • Digital Inputs: 2 optical inputs and 2 coaxial inputs are available for digital audio connection.
  • Headphone Output: There is a 6.3 mm (1/4") headphone output jack on the front panel.

Video

  • HDMI:
  • Inputs: 6   Outputs: 1
    8K Inputs: 0
  • Composite Video: Connect you VCR, Laserdisc player and other old video equipment with composite video cables.
  • Inputs: 5   Outputs: 1
  • Component Video: Component video connection gives you the higher quality video compared to the composite video connection. So in case your old DVD player and other equipment do not have an HDMI output but have Component video output use this connection over the composite one.
  • Inputs: 2   Outputs: 1
Image cannot be found
Image cannot be found

Specifications

Here we list all the available features and specifications of Onkyo TX-NR414.

BASICS
BrandOnkyo
ModelTX-NR414
TypeA/V Receiver
CountryUSA
Release Year2012
AMPLIFIER
Channels5.1
WRAT (Wide Range Amplifier Technology)
VLSC (Vector Linear Shaping Circuitry)
Optimum Gain Volume Circuitry
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability
BTL (Bridged Transless or Bridging)
AUDIO
Digital Processing Crossover Network
Digital Signal Processing (DSP) EngineAdvanced 32-Bit Processing DSP Chip
DACBurr-Brown
DAC Specs192 kHz/24 Bit
Maximum Channel Processing5.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic PLII
Dolby Digital EX
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM 2-ch/Multi-ch Input
Music Playback via USBFLAC, WAV, WMA, WMA Lossless, Ogg, MP3, LPCM, AAC
High Resolution Music Playback via USB and/or Network up to 192 kHz
High Resolution Audio Formats via USBFLAC, WAV, WMA Lossless, LPCM, AAC
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input
DSD via USB
DSD to PCM Converter
USB DAC
Jitter Reduction PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialog Control
Dialog Enhancement
Dialog Level Adjustment
Dialog Normalization
Dialogue Lift
Tone Control Front L/R Channels
Compressed Music Enhancer Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Virtual Speakers T-D (Theater-Dimensional)
Independent Subwoofer Outputs
CALIBRATION
Auto Speaker Calibration System with Mic.
VIDEO
Enhanced ARC
HDCP Version2.2
HDR10
HDR10+
Dynamic HDR
Dolby Vision
HLG (Hybrid Log Gamma)
BT.2020 color space
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthroughup to 1080p
Video Signal Upscaling
Analog To HDMI Upconversion
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control
CONNECTIVITY
MHL Input
DLNA 1.5
FireConnect
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay
Apple Product Connection iPod and iPhone via front USB
Remote App iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi via Front USB (optional UWF-1 sold separately)
Bluetooth
HDBaseT Compatible
HDMI Inputs6
HDMI Outputs1
8K Inputs
USB Input1 Front (for iPod/iPhone)
USB DC Out Port
Analog Audio Line Input6 (1 front)
Analog Audio Line Output
Phono Input
Optical Inputs2
Optical Outputs
Coaxial Inputs2
Composite Video Input5 (1 front)
Composite Video Output1
S-Video Input
S-Video Output
Component Video Input2
Component Video Output1
PC In
Multi-Channel Input
Analog Pre-Outs0.1
XLR Inputs
XLR Pre-outs
Front A/V InputsUSB, Composite Video, RCA Audio
Speaker A/B
Headphone Out6.3 mm (1/4")
ZONES
Zones2
Powered Zones
Zone 2 OutsRCA Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output
Remote (IR) Input/Output
MISC
On-Screen Display Basic Overlay
Detachable Power Cord
uport
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote /
On Screen Remote Programming
Bi-directional Remote Setup via GUI
Activity Based Remote
Smart Grid-Ready
RADIO
Analog Tuner FM/AM
Presets40
Digital Radio
Internet Radio vTuner
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION
Solid Aluminum Front
Speaker Terminals5
Large Speaker Terminals5
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
18mm Pitch High Grade Pre-outs
19mm-Pitch Audio Inputs
Gold plated RCA terminals
POWER
Power SupplyAC 120 V, 60 Hz
Independent Power Supply
H.C.P.S. (High Current Power Supply) Massive High Power Transformer
Toroidal Transformer
Power Consumption4.2 A
No Sound Power55 W
Standby Power0.1 W
GENERAL
ECO Mode / Hybrid Standby Function
Dimensions (W x H x D)435 mm x 173.5 mm x 328 mm
17-1/8" x 6-13/16" x 12-15/16"
Weight8.6 kg (19.0 lbs)
Warranty2 Years
SPECS
Power Output (8 Ω, 20 Hz - 20 kHz, 280 W (0.7% THD)
Power Output (6 Ω, 1 kHz, 2110 W (0.9% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)130 W (1% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)160 W
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)130 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)180 W
Dynamic Power per Channel (4 Ω, Front)160 W
Dynamic Power per Channel (8 Ω, Front)100 W
THD0.08% (20 Hz - 20 kHz, half power)
Damping Factor60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Line)200 mV/47 kΩ (Line)
Rated Lineout Level and Impedance200 mV/2.2 kΩ
Maximum Lineout Level and Impedance2 V/2.2 kΩ
S/N Ratio (Line, IHF-A)100 dB
Frequency Response (Analog In)5 Hz - 100 kHz/+1 dB, -3 dB (DSP bypass)
DSD Sampling Rates via HDMI2.8 MHz
Video Input Sensitivity/Output Level and Impedance1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
Video Frequency Response5 Hz - 100 MHz/+0 dB, -3 dB (Component)
Ethernet Standard100BASE-TX
FM Frequency87.5 MHz - 107.9 MHz
AM Frequency522/530 kHz - 1611/1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.