| AMPLIFIER |
Onkyo TX-SR313 |
Yamaha RX-V385 |
| Channels | 5.1 | 5.1 |
| Power Output | 65 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) | 70 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) |
| Front Wide Channel Support | | |
| WRAT (Wide Range Amplifier Technology) | | |
| VLSC (Vector Linear Shaping Circuitry) | | |
| Optimum Gain Volume Circuitry | | |
| THX™ Certification | | |
| Continuous 6 Ω Rated | | |
| Certified 4 Ω Performance | | |
| Discrete Output Stage Circuitry | | |
| 3-Stage Inverted Darlington Circuitry | | |
| PUSH-PULL Design | | |
| Independent Block Construction (Amp/Preprocessor) | | |
| Bi-amp Capability | | |
| BTL (Bridged Transless or Bridging) | | |
| AUDIO FEATURES |
Onkyo TX-SR313 |
Yamaha RX-V385 |
| Digital Processing Crossover Network | | |
| Digital Signal Processing (DSP) Engine | Advanced 32-Bit Processing DSP Chip | |
| Surround:AI™ | | |
| DAC | Burr-Brown | Burr-Brown DAC x 3 |
| DAC Specs | 192 kHz/24 Bit | 384 kHz/32 Bit |
| Maximum Channel Processing | 5.1 | 5.1 |
| Air Studios Monitor Certification | | |
| Dolby Atmos | | |
| Dolby Atmos Height Virtualization | | |
| Dolby Atmos Music | | |
| Dolby TrueHD | | |
| Dolby Digital Plus | | |
| Dolby Surround Upmixer | | |
| Dolby Pro Logic | PLII | PLII |
| Dolby Digital EX | | |
| Surround EX | | |
| DTS:X | | |
| DTS Neural:X | | |
| DTS Virtual:X | | |
| DTS Neo | Neo:6 | Neo:6 |
| DTS-HD Master Audio | | |
| DTS-HD High Resolution Audio | | |
| DTS 96/24 | | |
| DTS Express | | |
| DTS-ES | | |
| IMAX Enhanced | | |
| Auro 3D with Auro-Matic Upmixer | | |
| PCM | 2-ch/Multi-ch Input | 2-ch/Multi-ch Input |
| Music Playback via USB | FLAC, WMA, MP3, AAC | MP3, WMA, MPEG-4 AAC, WAV |
| High Resolution Music Playback via USB and/or Network | | |
| High Resolution Audio Formats via USB | | |
| Gapless Playback | | |
| DSD via HDMI | 2-ch/Multi-ch Input | 2-ch/Multi-ch Input |
| DSD via USB | | |
| DSD to PCM Converter | | |
| USB DAC | | |
| Jitter Reduction | PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for All Audio Signals | |
| DTS Dialogue Control | | |
| Dialog Enhancement | | |
| Dialog Level Adjustment | | |
| Dialog normalization | | |
| Dialogue Lift | | |
| Tone Control | Front L/R Channels | |
| Compressed Music Enhancer | Advanced Music Optimizer | including enhancer for Bluetooth® |
| High-resolution Music Enhancer | | |
| Adaptive DRC (Dynamic Range Control) | | |
| Initial Volume & Maximum Volume Setting | | |
| THX Processing Mode | | |
| Audyssey Dynamic EQ | | |
| Audyssey Dynamic Volume | | |
| Audyssey LFC | | |
| Audyssey Sub EQ HT | | |
| Audyssey DSX | | |
| Phase-Matching Bass Boost | | |
| Direct Mode | | |
| Pure Audio Mode | | |
| Pure Direct Analog Path Mode | | |
| Straight Decoding Mode | | |
| CINEMA DSP | | |
| DSP Programs | | 17 |
| SILENT CINEMA / Virtual CINEMA DSP | | Virtual CINEMA FRONT |
| Virtual Speakers | T-D (Theater-Dimensional) | |
| Independent Subwoofer Outputs | | |
| SPECIFICATIONS |
Onkyo TX-SR313 |
Yamaha RX-V385 |
| Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) | 65 W (0.7% THD) | |
| Power Output (6 Ω, 20 Hz - 20 kHz, 2 channel driven) | | 70 W (0.09% THD) |
| Power Output (6 Ω, 1 kHz, 2 channel driven, FTC) | 90 W (0.9% THD) | |
| Power Output (6 Ω, 1 kHz, 1 channel driven, FTC) | | 100 W (0.9% THD) |
| Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC) | 120 W | 135 W (10% THD) |
| Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC) | 100 W (1% THD) | |
| Dynamic Power per Channel (2 Ω, Front) | | 150 W |
| Dynamic Power per Channel (3 Ω, Front) | 160 W | |
| Dynamic Power per Channel (4 Ω, Front) | 125 W | 130 W |
| Dynamic Power per Channel (6 Ω, Front) | | 110 W |
| Dynamic Power per Channel (8 Ω, Front) | 80 W | |
| THD | 0.08% (20 Hz - 20 kHz, half power) | |
| Damping Factor | 60 (Front, 1 kHz, 8 Ω) | 100 (Front, 20 Hz - 20 kHz, 8 Ω) |
| Input Sensitivity and Impedance (Line) | 200 mV/47 kΩ (Line) | 200 mV/47 kΩ |
| Maximum Input Sensitivity (Line) | | 2.3 V (1 kHz, 0.5% THD) |
| Rated Preout Level and Impedance | | 1.0 V/1.2 kΩ (Subwoofer) |
| Rated Lineout Level and Impedance | 200 mV/2.2 kΩ (REC OUT) | |
| Maximum Lineout Level and Impedance | 2 V/2.2 kΩ (REC OUT) | |
| Rated Headphone Jack Output Level and Impedance | | 100 mV/470 Ω (1 kHz, 50 mV, 8 Ω) |
| S/N Ratio (Line, IHF-A) | 100 dB | 110 dB |
| Frequency Response (Analog In) | 5 Hz - 100 kHz/+1 dB, -3 dB (DSP bypass) | +0/-3 dB (AV 2 etc. to Front, 10 Hz to 100 kHz) |
| Residual noise (IHF-A Network) | | 150 µV (Speaker Out) |
| Channel Separation at 1 kHz/10 kHz (LINE) | | 70 dB/50 dB |
| DSD Sampling Rates via HDMI | 2.8 MHz | 2.8 MHz |
| Video Input Sensitivity/Output Level and Impedance | 1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite) | 1 Vp-p/75 Ω (Composite) |
| Video Maximum Input | | 1.5 Vp-p |
| Video Frequency Response | 5 Hz - 100 MHz/+0 dB, -3 dB (Component) | |
| Video S/N Ratio | | 50 dB |
| Ethernet Standard | | |
| Bluetooth Version | | 2․1 + EDR |
| Bluetooth Frequency | | 2.4 GHz |
| USB Terminal | | USB2.0 5 V, 1 A |
| FM Frequency | 87.5 MHz - 107.9 MHz | 87.50 MHz - 108.00 MHz |
| FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) | | Mono: 3 µV (20.8 dBf) |
| FM S/N Ratio | | Mono/Stereo: 65 dB/64 dB |
| FM Harmonic Distortion (IHF, 1 kHz) | | Mono/Stereo: 0.5%/0.6% |
| AM Frequency | 522/530 kHz - 1611/1710 kHz | 531 kHz - 1611 kHz |
| Warranty | 2 Years | 2 Years |
