Onkyo TX-NR7100 vs Onkyo TX-NR1010

      Disclosure: We earn money from the affiliate links to products associated with content in this article.

      Overview

      Here we are comparing Onkyo TX-NR7100 to Onkyo TX-NR1010 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Onkyo TX-NR7100 has 9 channel and the Onkyo TX-NR1010 has 7 channel amplifiers with Onkyo TX-NR7100's being less powerful.


      Onkyo TX-NR7100 Onkyo TX-NR1010

      Onkyo TX-NR7100 was introduced in 2021. It is equipped with 9 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 9.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz and upscales 1080p to 4K/8K and 4K to 8K video signal.

      Onkyo TX-NR1010 was introduced in 2012. It is equipped with 7 channel amplifier with 140 W (8 Ω, 20 Hz - 20 kHz and 2 channel driven) power per channel and is capable of 9.1 maximum channel processing. It , passes 1080/60p and upscales up to 4K/30p (Marvell Qdeo) video signal.

      Highlights

      • 9.2 Channels
      • 9.1 Channel Processing
      • 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
      • HDMI 2.1
      • THX™Select™ Certified
      • Dolby Atmos, DTS:X
      • HDR10, HDR10+, Dolby Vision
      • 8K Passthrough, 8K Upscaling
      • Wi-Fi, Bluetooth, Ethernet
      • Phono Input

      Highlights

      • 7.2 Channels
      • 9.1 Channel Processing
      • 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
      • THX™Ultra2 Plus Certified
      • 4K/30Hz Upscaling
      • Bluetooth, Ethernet
      • Phono Input

      Now that we've looked at the most essential specifications and gained a basic understanding of these receivers, we can delve into more details and see the differences between them.

      Pros and Cons

      In this section we present pros and cons of Onkyo TX-NR7100 and Onkyo TX-NR1010.

      PROS

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      •   THX™ Certification
      •   9.1 Channel Processing
      •   Dolby Atmos
      •   Dolby Atmos Height Virtualization
      •   DTS:X
      •   IMAX Enhanced
      •   DSD via HDMI
      •   Auto Speaker Calibration System with Mic.
      •   HDR10
      •   HDR10+
      •   Dolby Vision
      •   HDMI Version
      •   eARC
      •   New HDCP Version
      •   Auto Low Latency Mode Pass-through
      •   VRR
      •   QFT
      •   8K Passthrough
      •   8K Upscaling
      •   Analog To HDMI Upconversion
      •   Wi-Fi
      •   Bluetooth
      •   Works with Amazon Alexa
      •   Google Assistant
      •   Chromecast Built-In
      •   7 HDMI Inputs
      •   7 8K Inputs
      •   USB Input
      •   Many RCA Line Inputs
      •   Phono Input
      •   Composite Video Inputs
      •   Component Video Inputs
      •   Ethernet
      •   3 Zones
      •   Analog Tuner
      •   Pandora
      •   Spotify
      •   Tidal
      •   High Power Output - 140 W
      •   Front Wide Channel Support
      •   THX™ Certification
      •   9.1 Channel Processing
      •   DSD via HDMI
      •   Auto Speaker Calibration System with Mic.
      •   New HDCP Version
      •   Analog To HDMI Upconversion
      •   Bluetooth
      •   9 HDMI Inputs
      •   USB Input
      •   Many RCA Line Inputs
      •   Phono Input
      •   RCA Pre-Outs
      •   Composite Video Inputs
      •   Component Video Inputs
      •   Ethernet
      •   3 Zones
      •   Analog Tuner
      •   Pandora
      •   Spotify

      CONS

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      •   No Front Wide Channel Support
      •   No Auro 3D with Auro-Matic Upmixer
      •   No RCA Pre-Outs
      •   No Digital Radio
      •   No Dolby Atmos
      •   No Dolby Atmos Height Virtualization
      •   No DTS:X
      •   No IMAX Enhanced
      •   No Auro 3D with Auro-Matic Upmixer
      •   No HDR10
      •   No HDR10+
      •   No Dolby Vision
      •   No eARC
      •   No 8K Passthrough
      •   Does not Work with Amazon Alexa
      •   0 8K Input
      •   No Digital Radio
      •   No Tidal


      And here are some specifications which fall into average criteria and are neither in PROs nor in CONs category:

      AVERAGE

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      •   9.2 Channels
      •   Power Output - 100 W
      •   3 HDMI Outputs
      •   Bluetooth 4․2
      •   7.2 Channels
      •   Wi-Fi
      •   3 HDMI Outputs

      Advantage of Onkyo TX-NR7100

      This section shows those features and specifications which are the reason to choose Onkyo TX-NR7100 over Onkyo TX-NR1010.

      Onkyo TX-NR7100 vs Onkyo TX-NR1010
      More Channels 9.2 vs 7.2
      Dolby Atmos vs
      Dolby Atmos Height Virtualization vs
      Dolby Surround Upmixer vs
      DTS:X vs
      DTS Neural:X vs
      DTS Virtual:X vs
      IMAX Enhanced vs
      Gapless Playback vs
      DTS Dialog Control vs
      Independent Subwoofer Outputs vs
      HDR10 vs
      HDR10+ vs
      BT.2020 color space vs
      Dolby Vision vs
      HLG vs
      Enhanced Audio Return Channel (eARC) vs
      Newer HDCP Version 2.3 vs 2.2
      QMS vs
      Auto Low Latency Mode Pass-through vs
      VRR vs
      QFT vs
      Video Signal Passthrough up to 8K/60p (RGB/YCbCr4:4:4) vs up to 1080p
      Video Signal Upscaling 1080p to 4K/8K and 4K to 8K vs up to 4K/30p (Marvell Qdeo)
      Wi-Fi vs via Front USB (optional UWF-1 sold separately)
      Bluetooth SBC, AAC, aptX, aptX HD vs via Front USB (optional UBT-1 adapter sold separately)
      Works with Amazon Alexa vs
      Chromecast Built-In vs
      Works with SONOS vs
      DTS Play-Fi vs
      AirPlay AirPlay 2 vs
      More 8K Inputs 7 vs
      Tidal vs
      Deezer vs
      Higher DSD Sampling Rate via USB 2.8 MHz, 5.6 MHz, 11.2 MHz vs 2.8 MHz

      Check out other receivers which are frequently compared to Onkyo TX-NR7100.

      Advantage of Onkyo TX-NR1010

      This section shows those features and specifications which are the reason to choose Onkyo TX-NR1010 over Onkyo TX-NR7100.

      Onkyo TX-NR7100 vs Onkyo TX-NR1010
      Higher Power Output 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) vs 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
      Front Wide Channel Support vs
      VLSC (Vector Linear Shaping Circuitry) Front L/R Channels vs All Channels
      THX™ Certification Select™ (previously known as Select2) vs Ultra2 Plus
      Independent Block Construction (Amp/Preprocessor) vs
      Dolby Pro Logic vs PLIIz
      Dolby Digital EX vs
      DTS Neo vs Neo:X
      Music Playback via USB FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD vs FLAC, WAV, Apple Lossless, WMA, WMA Lossless, Ogg, MP3, DSD, Dolby TruHD, LPCM, AAC
      High Resolution Audio Formats via USB FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD vs FLAC, WAV, Apple Lossless, DSD, WMA Lossless, LPCM, AAC, Dolby TrueHD
      Dialogue Lift vs Screen Centered Dialog
      Audyssey Dynamic EQ vs
      Audyssey Dynamic Volume vs
      Audyssey DSX vs
      Component Video Upscaling vs *
      Analog to Analog Video conversion vs Composite, PC
      Component Video Maximum Resolution 480i/576i vs 1080p
      isf Certified Calibration Control vs
      MHL Input vs Front HDMI
      InstaPrevue Input Source Prevue vs
      More HDMI Inputs 7 (1 front) vs 9 (1 front)
      USB Input 1 (Rear) vs 1 Front (for iPod/iPhone) and 1 Rear
      More Optical Inputs 1 vs 3 (1 front)
      More Coaxial Inputs/Outputs 1 vs 3
      More RCA Pre-Outs 0.2 vs 9.2
      More Composite Video Inputs 2 vs 5 (1 front)
      More Composite Video Outputs vs 1
      More Component Video Inputs 1 vs 2
      More Component Video Outputs vs 1
      PC In vs
      Front A/V Inputs HDMI, Mini-Jack vs HDMI/MHL, USB, Composite Video, RCA Audio, Optical
      Zone 2 Outs HDMI, RCA Line Out (shared with Zone B) vs HDMI, Composite Video, RCA Line Out
      Zone 3 Outs vs RCA Line Out
      Whole House Mode vs
      +12V Trigger Output 1 (MAIN, 100 mA) vs 2 (Zone2, Zone 3)
      Remote (IR) Input/Output 1 / 0 vs 1 / 1
      SiriusXM vs
      More Speaker Terminals 9 vs 11
      More Large Speaker Terminals 9 vs 11
      Color-Coded Speaker Terminals vs
      Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) 100 W (0.08% THD) vs 140 W (0.05% THD)
      Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 220 W (10% THD) vs 250 W
      Higher Dynamic Power per Channel, 3 Ω, Front) 250 W vs 320 W
      Higher Dynamic Power per Channel, 4 Ω, Front) 220 W vs 270 W
      Higher Dynamic Power per Channel, 8 Ω, Front) 130 W vs 160 W
      Lower THD 0.08% (20 Hz - 20 kHz, Half power) vs 0.05% (20 Hz - 20 kHz, half power)
      Higher S/N Ratio (Line, IHF-A) 106 dB vs 110 dB
      Wider AM Frequency Range 530 kHz - 1710 kHz vs 522/530 kHz - 1611/1710 kHz

      Check out other receivers which are frequently compared to Onkyo TX-NR1010.

      Common Strengths and Weaknesses

      We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

      STRENGTHS Onkyo TX-NR7100 Onkyo TX-NR1010
        THX™ Certification Select™ (previously known as Select2) Ultra2 Plus
        Channel Processing9.19.1
        DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
        Auto Speaker Calibration System with Mic. Dirac Live™ and AccuEQ Room Corrections Audyssey MultEQ XT32
        New HDCP Version2.32.2
        Analog To HDMI Upconversion Component**, Composite Component, Composite, PC
        Bluetooth SBC, AAC, aptX, aptX HD via Front USB (optional UBT-1 adapter sold separately)
        Many HDMI Inputs7 (1 front)9 (1 front)
        USB Input1 (Rear)1 Front (for iPod/iPhone) and 1 Rear
        Many RCA Line Inputs7 (1 Front)7 (1 front)
        Phono Input
        Composite Video Inputs25 (1 front)
        Component Video Inputs12
        Ethernet
        Zones33
        Analog Tuner FM/AM FM/AM
        Pandora
        Spotify
      WEAKNESSES Onkyo TX-NR7100 Onkyo TX-NR1010
        No Auro 3D with Auro-Matic Upmixer
        No Digital Radio

      Audio Section

      Amplifier

      Onkyo TX-NR7100 Onkyo TX-NR1010

      9 channel Amplifier: Onkyo TX-NR7100 features 9 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

      7 channel Amplifier: Onkyo TX-NR1010 features 7 channel power amplifier. It is rated at 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

      • Dynamic Audio Amplification: Onkyo TX-NR7100 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.
      • WRAT (Wide Range Amp Technology): Onkyo TX-NR1010 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.
      • 3-Stage Inverted Darlington Circuitry: Onkyo TX-NR1010 features 3-Stage Inverted Darlington Circuitry. Standard amplifiers employ a negative feedback (NFB) design that counters distortion by feeding back the opposite phase of the output signal into the input stage. Unfortunately, NFB is easily affected by inverse electromotive forces from the speakers, leading to an increase in circuit noise. Three-Stage Inverted Darlington Circuitry is a core Onkyo technology incorporating a low-NFB design that makes the sound more natural. Sensitive to oscillations, this circuitry requires very advanced control technology in order to be incorporated into the amplifier.

      THX certification

      Onkyo TX-NR7100 is thxtradecertification Select™ (previously known as Select2) certified. This means that it is for medium sized rooms, up to 2,000 cubic feet in size, with a 10-12 foot viewing distance from the screen.

      Onkyo TX-NR1010 is thxtradecertification Ultra2 Plus certified. This means that it brings the cinematic experience to large home theaters, 3,000 cubic feet (85 cubic meters) in size, with a viewing distance of 12 feet (4 meters) or greater from the screen.

      • THX™ Certification: THX™ Certification offers optimal performance, superior quality and seamless integration. THX works with partners from the ground up, so that certified products deliver professional quality audio-visual experiences right out of the box. They only certify the very best products with uncompromised quality, performance and consistency. They ensure that THX certified devices play well with lower performing devices and components. THX listening modes make the receiver to have one speaker set up for movies, music and games. They are tested for power output, bass management, signal-to-noise ratio and feature THX Loudness Plus, Boundary Gain Compensation, Timbre Matching and RE-EQ.
      • Power Output: Power output is tested to ensure the receiver accurately plays source material at THX Reference Level in every input and mode and at every sampling rate for all possible playback combinations selected by the listener.
      • Frequency Response: THX has strict requirements for frequency response to ensure that you hear all the details in high-resolution tracks, ensures dialog in movies, and vocals in music are clear while maintaining deep, impactful bass output that doesn’t overpower the listening experience.
      • Signal-to-Noise Ratio: THX tests the signal-to-noise ratio to ensure the unit is designed to have low noise performance with very little to no audible hiss from the speakers.
      • Bass Management: THX requires an 80Hz crossover point in the setup menu to ensure proper bass management in every THX Certified AVR. This setting confirms that the subwoofer handles low frequencies, freeing up the loudspeakers to handle mids and highs.
      • THX Loudness Plus™: THX Loudness Plus™ is a volume control technology featured in THX Certified Dominus, THX Certified Ultra and THX Certified Select AV Receivers, and preamplifiers that automatically adjusts the front-to-back speaker level relationship as you turn the volume down. With THX Loudness Plus, home theater audiences can now experience the rich details of surround sound at any volume level.
      • Boundary Gain Compensation: Sitting near a wall may result in increased acoustic levels at the lower frequencies. BGC corrects the way low frequency sound is perceived when seated near a wall. This results in a more accurate bass response.
      • Timbre Matching: Your ears hear different tonal qualities in sounds coming from different directions. Timbre Matching restores the frequency balance between your front and surround speakers ensuring seamless and smooth panning between the front to back of the room.
      • RE-EQ: Many movie soundtracks are mixed in studios for playback in large cinema auditoriums with an array of speakers. When played on home systems, they may appear abrasive and edgy. Re-EQ establishes a more accurate tonal balance when enjoying movies in your home.

      Speaker Configurations

      Onkyo TX-NR7100's and Onkyo TX-NR1010's amplifiers can be assigned for different speaker configurations.

      • Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
      • Onkyo TX-NR7100: 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
      • Onkyo TX-NR1010: Not supported.
      • DTS:X Configurations: The following speaker configurations are supported for DTS:X:
      • Onkyo TX-NR7100: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
      • Onkyo TX-NR1010: Not supported.
      • Configurations without height channels: There are also other speaker configurations available which do not include height channels:
      • Onkyo TX-NR7100: 5.2, 7.2 with internal amplifier.
      • Onkyo TX-NR1010: 5.2, 7.2 with internal amplifier and 9.2 with addition of external 2 channel amplifier.
      • Front Wide Channel support: With the presence of two front wide speakers you can enhance the front surround stage. The following speaker configurations are available for front wide channels:
      • Onkyo TX-NR7100: Does not support.
      • Onkyo TX-NR1010: 9.2.
      • 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

      • Dolby Atmos

        Onkyo TX-NR7100 supports Dolby Atmos. It is a cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

        • Dolby Surround Upmixer: Onkyo TX-NR7100 supports Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
        • Dolby Atmos Height Virtualization: Onkyo TX-NR7100 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

        DTS:X

        Onkyo TX-NR7100 supports DTS:X. A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

        • DTS Neural:X: Onkyo TX-NR7100 supports DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
        • DTS Virtual:X: Onkyo TX-NR7100 supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
        • DTS Dialog Control: Onkyo TX-NR7100 supports DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

        Audyssey DSX

        Onkyo TX-NR1010 supports Audyssey DSX which allows you to augment a standard five-channel home theater with either two Front Wide or two Front High speakers. The Wide channels create an expansive soundstage and bring out convincing directional effects. Alternatively, Height channels can add a vertical dimension to movie and game soundtracks.


        Enhanced Audio Return Channel (eARC)

        Onkyo TX-NR7100 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.


        Sound Processing

        • Audyssey: Onkyo TX-NR1010 comes with Audyssey Dynamic EQ and Dynamic Volume.
        • Dynamic EQ: selects the best possible frequency response and surround volume levels moment-by-moment. This ensures that the bass response, tonal balance and surround impression remain constant despite changes in volume. This is the first technology that carefully combines information from incoming source levels with actual output sound levels in the room, a pre-requisite for delivering a dynamic volume solution.
        • Dynamic Volume: Your Listening experience can be greatly diminished when there are significant shifts in volume between television programs, commercials and within the program material itself. When this happens you must constantly adjust the volume to maintain your desired listening level. Audyssey Dynamic Volume monitors the volume of program material moment-by-moment and automatically adjusts it, maintaining the desired listening level for all content while optimizing the dynamic range to preserve impact.
        • Compressed Music Enhancer: Onkyo TX-NR7100 and Onkyo TX-NR1010 feature Compressed Music Enhancer which enhances the quality of the music files with lossy compression.
        • Advanced Music Optimizer: Compressed music enhancement in Onkyo TX-NR7100 and Onkyo TX-NR1010 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.

        Room Calibration

        Onkyo TX-NR7100 comes with Dirac Live™ and AccuEQ and Onkyo TX-NR1010 comes with Audyssey MultEQ XT32 room correction system.

        • Audyssey Room Calibration: Audyssey is an acoustic measurement technology which automatically restores the acoustic distortion caused by the acoustic behaviour of a room with only a push on a button. Audyssey equalization provides an clear, accurate, natural sound with voices and dialog that become focused and intelligible, restoring the musical balance. Musical instruments and sound effects become precisely localized and the surround soundstage is made seamless and enveloping.
        • AccuEQ: First, AccuEQ detects the presence of speakers and evaluates the impedance of each. Next, it pinpoints their distance relative to the main listening position using the mic and sets suitable sound-pressure levels. Then it selects the optimal crossover frequency so that deeper bass rolls smoothly off to the subwoofer. Finally, AccuEQ performs frequency response equalization based on room-acoustic and speaker data collected via microphone. The sound-field is now tailored around the listening position, resulting in a more immersive and realistic in-film experience.
        • Dirac Live: The interaction between your sound system and the physical layout of your room has a huge impact on sound quality. Dirac Live™ Room Correction applies state-of-the-art, patented algorithms to analyze and digitally reduce room impact and enhance speaker performance. Dirac Live delivers a larger sweet spot, accurate staging, clarity, voice intelligibility, and a deeper, tighter bass not otherwise possible. Fully tunable to your preference.

      Video Section

      HDMI

      Onkyo TX-NR7100 comes with 7 HDMI 2.1 inputs with 8K support. It has 2 outputs - 1 Main and 1 Sub/Zone2.

      Onkyo TX-NR1010 comes with 9 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.

      • 8K/60Hz and 4K/120Hz Passthrough on Onkyo TX-NR7100: All inputs pass up to 8K/60p (RGB/YCbCr4:4:4) video signal.
        1080/60p Passthrough on Onkyo TX-NR1010: All inputs pass up to 1080p video signal.
      • 8K Upscaling on Onkyo TX-NR7100: It can upscale 1080p to 4K/8K and 4K to 8K from HDMI and analog sources.
        4K Upscaling on Onkyo TX-NR1010: It can upscale up to 4K/30p (Marvell Qdeo) from HDMI and analog sources.
      • Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
      • BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on Onkyo TX-NR7100 only).
      • HDCP Copy Protection: Onkyo TX-NR7100 is HDCP 2.3.0 and Onkyo TX-NR1010 is HDCP 2.2.0 compliant which is a requirement for 4K/HDR copy-protected content transmission.
      • Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on Onkyo TX-NR7100 only).
      • 3D Ready: Both receivers are able to pass 3D video through HDMI.

      HDR (High Dynamic Range)

      Onkyo TX-NR7100 supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma.

      Onkyo TX-NR1010 does not support HDR.

      High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

      • HDR10: HDR10 uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports 10-bit color which corresponds to 1024 shades of the primary RGB colors. It is technically limited to a maximum of 10,000 nits peak brightness, however common HDR10 contents are mastered with peak brightness from 1,000 to 4,000 nits.
      • HDR10+: HDR10+ is an HDR video technology that adds dynamic metadata to HDR10 source files. The dynamic metadata are used to adjust brightness levels on a scene-by-scene or even frame-by-frame basis. HDR10+ supports maximum of 10,000 nits peak brightness and 10-bit or more (up to 16-bit) color bit depth. It uses Samsung's dynamic metadata defined in SMPTE ST 2094-40.
      • Dolby Vision: Dolby Vision is a set of technologies developed by Dolby Laboratories for high dynamic range (HDR) video. It covers content creation, distribution, and playback. Like HDR10+, it includes dynamic metadata that are used to adjust and optimize each frame of the HDR video to the consumer display's capabilities in a way specified by the content creator. Dolby Vision allows for a maximum resolution of 8K up to 12-bit color depth, maximum peak brightness of 10,000 nits and a color gamut up to Rec. 2020. It uses Dolby's proprietary dynamic metadata defined in SMPTE ST 2094-10.
      • Hybrid Log-Gamma (HLG): The Hybrid Log-Gamma (HLG) is a transfer function developed mainly for HDR live video feed and over-the-air broadcasts. It is an HDR format that uses BT.2020 color primaries and a bitdepth of 10-bit. It is backward compatible with the transfer function of SDR and is designed to be better-suited for television broadcasting, where the metadata required for other HDR formats is not backward compatible with non-HDR displays. HLG defines a non-linear optical-electro transfer function, in which the lower half of the signal values use a gamma curve and the upper half of the signal values use a logarithmic curve.

      IMAX Enhanced

      Onkyo TX-NR7100 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

      • What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.
      • IMAX Enhanced Content: IMAX Enhanced studio partners have announced IMAX Enhanced versions of movies that exclusively feature IMAX's signature picture, sound and scale.
      • Picture: Stunning, ultra-vivid 4K HDR picture that utilizes the newest, proprietary Digital Media Remastering technology (DMR) developed by IMAX. DMR accurately reduces noise and grain under the filmmaker’s guidance to best optimize the content for a much higher-quality, higher-brightness display. Without this technology, high-dynamic range content can actually look worse than what was originally seen and intended by the filmmaker.
      • Sound: IMAX and DTS have partnered with award-winning Hollywood sound mixers leveraging DTS:X codec technology integrated in home audio equipment and select televisions to deliver an IMAX signature sound experience with deeper bass and more dynamic range.
      • Scale: Select IMAX Enhanced titles that were shot with IMAX-certified cameras or specially formatted for IMAX theatres feature its exclusive expanded aspect ratio, enabling viewers to see the full scale and scope of the picture on 4K HDR TVs.
      • Streaming Services: IMAX Enhanced is now available on the world’s biggest streaming services, including Disney+, BRAVIA CORE, Tencent, iQiyi and more.

      Gaming Features

      Onkyo TX-NR7100 supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

      • Auto Low Latency Mode (ALLM): Auto Low Latency Mode enables the ideal latency setting to automatically be set allowing for smooth, lag-free and uninterrupted viewing and interactivity. When the receiver detects a gaming signal it will enter ALLM. The signal will also be sent to the TV causing it to automatically switch to a low-latency, low-lag mode for gaming. Some functions will not be available on the receiver and TV during ALLM.
      • Variable Refresh Rate (VRR): VRR enables a gaming source such as a console or computer to deliver video frames as fast as it can, which in many cases is slower than the normal static refresh rate. It allows the TV to adapt to certain frame rate which reduces or eliminates lag, judder and frame tearing for more fluid and better detailed gameplay.
      • Quick Frame Transport (QFT): QFT reduces latency for smoother no-lag gaming, and real-time interactive virtual reality. It transports each frame at a higher rate to decrease display latency, which is the amount of time between a frame being ready for transport in the GPU and that frame being completely displayed.

      Inputs and Outputs

      Audio

      • Phono Input: There is an MM phono input on Onkyo TX-NR7100 and Onkyo TX-NR1010 with built-in phono stage for connecting the moving magnet cartridge output of the turntable directly to the receiver.
      • Analog Pre-Outs: Onkyo TX-NR1010 has 9.2 preamplifier outputs which allows you to connect the receiver to the external power amplifier. You may want to use a high quality external amplifier for certain channels, usually for front L/R and center, and use the receiver to power the rest. Also, Onkyo TX-NR1010 has 9 channel processing but has only 9 channel amplifier, so it needs external amplifier connected to the analog pre-outs in order to reach its maximum speaker configuration.
      • Analog Line Inputs: There are 7 pair of line inputs on both receivers for connecting sources with analog outputs.
      • Digital Inputs: 1 optical input and 1 coaxial input are available on Onkyo TX-NR7100 and 3 optical inputs and 3 coaxial inputs are available on Onkyo TX-NR1010 for digital audio connections.
      • Headphone Output: There is a 6.3 mm (1/4") headphone output jack on the front panel of each receiver.

      Video

      • HDMI:
      • Onkyo TX-NR7100
        Inputs:
        7 (1 front)   Outputs: 2 (1 Main, 1 Sub/Zone2)
        8K Inputs: 7.
      • Onkyo TX-NR1010
        Inputs:
        9 (1 front)   Outputs: 2 (1 Main, 1 Sub/Zone2)
        8K Inputs: 0.
      • Composite Video: Connect you VCR, Laserdisc player and other old video equipment with composite video cables.
      • Onkyo TX-NR7100
        Inputs:
        2   Outputs: 0.
      • Onkyo TX-NR1010
        Inputs:
        5   Outputs: 1.
      • Component Video: Component video connection gives you the higher quality video compared to the composite video connection. So in case your old DVD player and other equipment do not have an HDMI output but have Component video output use this connection over the composite one.
      • Onkyo TX-NR7100 supports up to 480i/576i resolution on Component video connectors.
      • Onkyo TX-NR1010 supports up to 1080p resolution on Component video connectors.
      • Onkyo TX-NR7100
        Inputs:
        1   Outputs: 0.
      • Onkyo TX-NR1010
        Inputs:
        2   Outputs: 1.

      Front A/V Inputs

      • Onkyo TX-NR7100: HDMI, Mini-Jack
      • Onkyo TX-NR1010: HDMI/MHL, USB, Composite Video, RCA Audio, Optical

      Onkyo TX-NR7100

      Image cannot be found Image cannot be found

      Onkyo TX-NR1010

      Image cannot be found Image cannot be found
      >

      Evaluations

      We evaluate Onkyo TX-NR7100 and Onkyo TX-NR1010 and give them scores of 92 and 82 out of 100 recpectively. We also give separate scores for 7 different categories according to the available features and specifications some of which are listed below. These evaluations are relative and may change each time a new receiver is added to the database.


      Onkyo TX-NR7100

      Onkyo TX-NR1010

      OVERALL
      92
      OVERALL
      82

      Amplifier

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      91
      •   9.2 Channels
      •   Power Output - 100 W
      •   THX™ Certification
      EXCELLENT
      94
      •   7.2 Channels
      •   High Power Output - 140 W
      •   THX™ Certification

      Audio Features

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      91
      •   9.2 Channels
      •   No Front Wide Channel Support
      •   9.1 Channel Processing
      •   Dolby Atmos
      •   Dolby Atmos Height Virtualization
      •   DTS:X
      •   IMAX Enhanced
      •   No Auro 3D with Auro-Matic Upmixer
      •   DSD via HDMI
      GOOD
      80
      •   7.2 Channels
      •   Front Wide Channel Support
      •   9.1 Channel Processing
      •   No Dolby Atmos
      •   No Dolby Atmos Height Virtualization
      •   No DTS:X
      •   No IMAX Enhanced
      •   No Auro 3D with Auro-Matic Upmixer
      •   DSD via HDMI

      Video Features

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      100
      •   HDR10
      •   HDR10+
      •   Dolby Vision
      •   HDMI Version
      •   Auto Low Latency Mode Pass-through
      •   VRR
      •   QFT
      •   8K Passthrough
      •   8K Upscaling
      •   Analog To HDMI Upconversion
      AVERAGE
      60
      •   No HDR10
      •   No HDR10+
      •   No Dolby Vision
      •   No 8K Passthrough
      •   Analog To HDMI Upconversion

      Connectivity

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      88
      •   eARC
      •   New HDCP Version
      •   Wi-Fi
      •   Bluetooth
      •   Works with Amazon Alexa
      •   Google Assistant
      •   Chromecast Built-In
      •   7 HDMI Inputs
      •   3 HDMI Outputs
      •   7 8K Inputs
      •   USB Input
      •   Many RCA Line Inputs
      •   Phono Input
      •   No RCA Pre-Outs
      •   Composite Video Inputs
      •   Component Video Inputs
      •   Ethernet
      •   Bluetooth 4․2
      EXCELLENT
      86
      •   No eARC
      •   New HDCP Version
      •   Wi-Fi
      •   Bluetooth
      •   Does not Work with Amazon Alexa
      •   9 HDMI Inputs
      •   3 HDMI Outputs
      •   0 8K Input
      •   USB Input
      •   Many RCA Line Inputs
      •   Phono Input
      •   RCA Pre-Outs
      •   Composite Video Inputs
      •   Component Video Inputs
      •   Ethernet

      Zones

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      90
      •   3 Zones
      EXCELLENT
      91
      •   3 Zones

      Radio

      Onkyo TX-NR7100

      Onkyo TX-NR1010

      EXCELLENT
      92
      •   Analog Tuner
      •   Pandora
      •   Spotify
      •   Tidal
      EXCELLENT
      90
      •   Analog Tuner
      •   Pandora
      •   Spotify
      •   No Tidal


      For a full specification list please go to the specifications page:

      Amazon Affiliate Disclosure

      ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.