Integra DRX-4.2 vs Marantz SR7012 Detailed Comparison
image not found
SCORE:
91
SCORE:
92

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Integra DRX-4.2 to Marantz SR7012 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 9 channel amplifiers with Integra DRX-4.2's being less powerful.

Let us have a look at some highlights of the models.

Integra DRX-4.2 Highlights

Marantz SR7012 Highlights

  • 9.2 channels
  • 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • THX Select™ certified
  • Dolby Atmos, DTS:X capable
  • HDR10, Dolby Vision, 4K Passthrough
  • Airplay, Chromecast, DTS Play-Fi
  • Ethernet
  • USB and Phono inputs
  • 9.2 channels
  • 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • Dolby Atmos, DTS:X, Auro 3D capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay 2, DLNA, HEOS
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs

We have evaluated both receivers. Marantz SR7012 gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Integra DRX-4.2

Marantz SR7012

AMPLIFIER
91
VIDEO FEATURES
95
AUDIO FEATURES
89
CONNECTIVITY
84
MULTIZONE
93
MISCELLANEOUS
89
RADIO
92
OVERALL
91
AMPLIFIER
90
VIDEO FEATURES
95
AUDIO FEATURES
92
CONNECTIVITY
92
MULTIZONE
93
MISCELLANEOUS
88
RADIO
96
OVERALL
92

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Integra DRX-4.2

This section shows those features and specifications which are the reason to choose Integra DRX-4.2 over Marantz SR7012.

Integra DRX-4.2 has bigger power supply, higher signal to noise ratio and higher DSD sampling rate via USB. It supports SONOS.

Integra DRX-4.2 Marantz SR7012
THX™ Certification Select™ (previously known as Select2)
Music Playback via USB FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD
High Resolution Audio Formats via USB FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD Apple Lossless, WAV, FLAC, DSD
FlareConnect
Remote Monitoring with ihiji
Chromecast Built-In
DTS Play-Fi
Works with SONOS
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
+12V Trigger Output 3 (A:100 mA, B:25 mA, C:25 mA) 2
More GUI Languages 9 3
Bigger Power Supply 750 W 710 W
Higher S/N Ratio (Line, IHF-A) 106 dB 100 dB
Higher S/N Ratio (Phono MM, IHF-A) 80 dB 74 dB
Higher DSD Sampling Rate via USB 2.8 MHz, 5.6 MHz, 11.2 MHz 5.6 MHz, 2.8 MHz

Advantage of Marantz SR7012

This section shows those features and specifications which are the reason to choose Integra DRX-4.2 over Marantz SR7012.

Integra DRX-4.2 has bigger power supply, higher signal to noise ratio and higher DSD sampling rate via USB. It supports SONOS.

Integra DRX-4.2 Marantz SR7012
Dolby Digital EX
DTS Virtual:X
Auro 3D with Auro-Matic Upmixer Built-In
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Independent Dual Subwoofer Output
isf Certified Calibration Control
Works with Amazon Alexa
AirPlay Airplay AirPlay 2
Wi-Fi
Bluetooth SBC
Enhanced Audio Return Channel (eARC)
More HDMI Inputs 7 (1 front) 8 (1 front)
More HDMI Outputs 2 (1 Main, 1 Sub/Zone2) 3 (2 for MAIN, 1 for ZONE2)
More Coaxial Inputs/Outputs 1 / 2 /
More Composite Video Inputs 2 4 (1 front)
More Composite Video Outputs 1
More Component Video Inputs 2 3
More Component Video Outputs 1
Multi-Channel Input 7.1
Front A/V Inputs HDMI HDMI, USB, Composite, L/R Audio
Zone 2 Outs HDMI, RCA Pre/Line Out HDMI, Component, Composite, Pre Out
Napster
SiriusXM Internet Radio
Color-Coded Speaker Terminals
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) 100 W (0.08% THD) 125 W (0.05% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 225 W (10% THD) 235 W (10% THD)
Wider AM Frequency Range 530 kHz - 1710 kHz 520 kHz - 1710 kHz

Common Strengths and Weaknesses

Here we list common strengths and weaknesses of both receivers.

STRENGTHS
Certified 4 Ω Performance 👍
Bi-amp Capability 👍
Many Channel Processing 👍
Dolby Atmos 👍
Dolby TrueHD 👍
Dolby Digital Plus 👍
Dolby Surround Upmixer 👍
DTS:X 👍
DTS Neural:X 👍
DTS-HD Master Audio 👍
DTS-HD High Resolution Audio 👍
DTS 96/24 👍
DTS Express 👍
DTS-ES 👍
High Resolution Music Playback via USB and/or Network 👍
Gapless Playback 👍
DSD via HDMI 👍
DSD via USB 👍
DTS Dialog Control 👍
Dialog Normalization 👍
Compressed Music Enhancer 👍
Auto Speaker Calibration System with Mic. 👍
HDR10 👍
BT.2020 color space 👍
Dolby Vision 👍
HLG 👍
3-D Ready 👍
4K or 8K Video Passthrough 👍
Analog To HDMI Upconversion 👍
Ethernet 👍
New HDCP Version 👍
Many HDMI Inputs 👍
USB Input 👍
Many Analog Audio Line Inputs 👍
Phono Input 👍
Composite Video Inputs 👍
Component Video Inputs 👍
Analog Pre-Outs 👍
Zones 👍
Detachable Power Cord 👍
Analog Tuner 👍
Pandora 👍
Spotify 👍
Tidal 👍
Deezer 👍
WEAKNESSES
No Front Wide Channel Support 👎
No Dolby Atmos Height Virtualization 👎
No IMAX Enhanced 👎
No High-resolution Music Enhancer 👎
No HDR10+ 👎

Selected Features

Amplifier

Integra DRX-4.2 and Marantz SR7012 have 9 channel amplifiers. Integra DRX-4.2 delivers 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Marantz SR7012 delivers 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load. Since 2016 all receiver manufacturers have dropped front wide channel support and these models are no exceptions.


Video Features

Both receivers support 4K passthrough up to 60p. Marantz SR7012 can do 4K upscaling up to 60p. The receivers support HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Integra DRX-4.2 and Marantz SR7012 support Dolby Atmos with its Dolby Surround upmixer. They can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Integra DRX-4.2 and Marantz SR7012 support DTS:X with its Neural:X upmixer. Both of them can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Auro-3D with its Auro-Matic upmixer

Marantz SR7012 supports Auro-3D and its Auro-Matic upmixer out of the box or after free firmware update. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.


Current Feedback Topology

Marantz SR7012 features Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.


HDAM

Marantz SR7012 features exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.


THX™ Certification

Integra DRX-4.2 is THX™ certified which offers optimal performance, superior quality and seamless integration. THX works with partners from the ground up, so that certified products deliver professional quality audio-visual experiences right out of the box. They only certify the very best products with uncompromised quality, performance and consistency. They ensure that THX certified devices play well with lower performing devices and components. THX listening modes make the receiver to have one speaker set up for movies, music and games. They are tested for power output, bass management, signal-to-noise ratio and feature RE-EQ, timbre matching, boundary gain compensation and THX Loudness Plus.


MDAX2

Compressed music enhancement in Marantz SR7012 is done by Marantz’ MDAX2 technology. The use of compressed audio files like MP3, Windows Media™ Audio or AAC is getting more and more popular. The audio quality of these compressed files however is less than the original lossless files that are on a CD, especially lacking the higher frequencies and affecting the lower frequencies which make the audio image less wide and deep. The Marantz Digital Audio Expander 2, also called M-DAX2, recalculates the outputted frequency range. This enables you to get a more detailed and clearer sound.


Advanced Music Optimizer

Compressed music enhancement in Integra DRX-4.2 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.


Connectivity


Integra DRX-4.2

Integra DRX-4.2 can be connected to internet using ethernet cable. The Receiver works with SONOS and supports[y] Airplay. It has 7 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 (shared with Zone 3 Line/Pre Out) channel analog pre-outs for external amplification.

Front panel has HDMI input.

Image cannot be found Image cannot be found

Marantz SR7012

Marantz SR7012 can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports[y] AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 7.1 multi-channel analog inputs and 11.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Integra DRX-4.2 and here - Marantz SR7012.

BASICS Integra DRX-4.2 Marantz SR7012
BrandIntegraMarantz
ModelDRX-4.2SR7012
TypeA/V ReceiverA/V Receiver
CountryNorth AmericaUSA
Release Year20182017
AMPLIFIER Integra DRX-4.2 Marantz SR7012
Channels9.29.2
Front Wide Channel Support
THX™ Certification Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability Front L/R Channels assignable
AUDIO Integra DRX-4.2 Marantz SR7012
DACAKM AK4458AKM AK4458
Maximum Channel Processing11.111.2
Air Studios Monitor Certification
Dolby Atmos up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer Built-In
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBFLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHDMP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD
High Resolution Music Playback via USB and/or Network up to 192 kHz up to 192 kHz
High Resolution Audio Formats via USBFLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHDApple Lossless, WAV, FLAC, DSD
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD via USB 2-ch Input 2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
DTS Dialog Control
Dialog Enhancement
Dialog Normalization
Dialogue Lift
Compressed Music Enhancer Advanced Music Optimizer MDAX2
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Independent Dual Subwoofer Output
CALIBRATION Integra DRX-4.2 Marantz SR7012
Auto Speaker Calibration System with Mic. AccuEQ Advance with AccuReflex™ Audyssey MultEQ XT32
VIDEO Integra DRX-4.2 Marantz SR7012
HDR10
HDR10+
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode Pass-through
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion Component**, Composite Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control
CONNECTIVITY Integra DRX-4.2 Marantz SR7012
FlareConnect
Remote Monitoring with ihiji
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay Airplay AirPlay 2
Apple Product Connection iPod, iPhone and iPad iPod, iPhone and iPad
Remote App Integra Control Pro Marantz 2016 AVR Remote App for iOS and Android devices
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi
Bluetooth SBC
HDBaseT Compatible
In: 1
Out: 1
RS-232: 1 (Pasth through)
IR In: 1 (Path through)
IR Out: 1 (Path through)
Maximum Video Resolution: 4K 60 Hz (YCbCr 4:4:4)
Enhanced ARC
HDCP Version2.22.2
HDMI Input7 (1 front)8 (1 front)
HDMI Output2 (1 Main, 1 Sub/Zone2)3 (2 for MAIN, 1 for ZONE2)
USB Input1 (Rear)1 (Front) for USB memory
USB DC Out Port
Analog Audio Line Input66 (1 front)
Analog Audio Line Output
Phono Input
Optical In22
Optical Out
Coaxial In/Out1 / 2 /
Composite Video Input24 (1 front)
Composite Video Output 1
S-Video Input
S-Video Output
Component Video Input23
Component Video Output 1
PC In
Multi-Channel Input 7.1
Analog Pre-Outs11.2 (shared with Zone 3 Line/Pre Out)11.2
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMIHDMI, USB, Composite, L/R Audio
Headphone Out 6.3 mm 6.3 mm
ZONES Integra DRX-4.2 Marantz SR7012
Zones33
Powered Zones 2 and 3 2 and 3
Zone 2HDMI, RCA Pre/Line OutHDMI, Component, Composite, Pre Out
Zone 3 OutsRCA Pre/Line OutPre Out
RS-232
+12V Trigger Output3 (A:100 mA, B:25 mA, C:25 mA)2
MISC Integra DRX-4.2 Marantz SR7012
On-Screen Display Advanced Graphic User Interface
GUI Languages93
IP Control for CI
Detachable Power Cord Oversized AC Cord
RADIO Integra DRX-4.2 Marantz SR7012
Analog Tuner FM/AM FM/AM
Digital Radio
Internet Radio TuneIn TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION Integra DRX-4.2 Marantz SR7012
Front PanelAnti-Resonant Aluminum Front PanelMetal
Speaker Terminals1111
Large Speaker Terminals1111
Color-Coded Speaker Terminals
Gold plated RCA terminals
POWER Integra DRX-4.2 Marantz SR7012
Power SupplyAC 120 V, 60 HzAC 120 V, 60 Hz
Toroidal Transformer (EI)
Power Consumption750 W710 W
Standby Power0.15 W0.2 W
GENERAL Integra DRX-4.2 Marantz SR7012
ECO Mode / Hybrid Standby Function
Dimensions (W x H x D)435 mm x 174 mm x 376.5 mm
17-1/8" x 6-7/8" x 14-13/16"
440 mm x 185 mm x 411 mm (with antenna: 440 mm x 247 mm x 411 mm)
17-3/8" x 7-3/8" x 16-1/4" (with antenna: 17-3/8" x 9-3/4" x 16-1/4"
Weight11.2 kg (24.7 lbs)14.2 kg (31 lbs 5 oz)
Warranty3 Years3 Years
SPECS Integra DRX-4.2 Marantz SR7012
Power Output (8 Ω, 20 Hz - 20 kHz, 2100 W (0.08% THD)125 W (0.05% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)225 W (10% THD)235 W (10% THD)
Input Sensitivity and Impedance (Line)200 mV/47 kΩ (Line)200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)3.5 mV/47 kΩ2.5 mV
S/N Ratio (Line, IHF-A)106 dB100 dB
S/N Ratio (Phono MM, IHF-A)80 dB74 dB
Frequency Response (Analog In)5 Hz - 100 kHz/+1 dB, -3 dB (Direct)+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
DSD Sampling Rates via USB2.8 MHz, 5.6 MHz, 11.2 MHz5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
Ethernet Standard10BASE-T/100BASE-TX100BASE-TX
USB TerminalVer. 2.0, 5 V, 1 AUSB2.0 5V, 1 A
FM Frequency87.5 MHz - 107.9 MHz87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)Mono: 1.56 µV (15.0 dBf)Mono: 2.8 µV (20.2 dBf)
AM Frequency530 kHz - 1710 kHz520 kHz - 1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.