Here we are comparing Denon AVR-X6300H to Marantz SR7010 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X6300H has 11 channel and the Marantz SR7010 has 9 channel amplifiers with Denon AVR-X6300H's being more powerful.

Let us have a look at some highlights of the models.

We have evaluated both receivers. Denon AVR-X6300H gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

This section shows those features and specifications which are the reason to choose Denon AVR-X6300H over Marantz SR7010.

Denon AVR-X6300H has more channels, more power per channel, bigger power supply, higher signal to noise ratio, higher DSD sampling rate via USB and higher bluetooth standard. It supports HEOS, Amazon Alexa, Tidal, Deezer and Napster. It has DTS Dialog Control.

	Denon AVR-X6300H	Marantz SR7010
More Channels	11.2	9.2
DTS Dialog Control	✔	✖
Dialog Enhancement	✔	✖
Audyssey App Support	✔	✖
Auto Low Latency Mode Pass-through	✔	✖
HEOS	✔	✖
Works with Amazon Alexa	✔	✖
AirPlay	✔ AirPlay 2	✔ AirPlay
More Analog Audio Line Inputs	7 (1 front)	6 (1 front)
More Composite Video Inputs	5 (1 front)	4 (1 front)
Remote (IR) Input/Output	1 / 1	N/A
More GUI Languages	9	3
Analog Tuner	✔ FM/AM with RDS	✔ FM/AM
Tidal	✔	✖
Deezer	✔	✖
Napster	✔	✖
Transparent High-Grade Speaker Terminals	✔	✖
Bigger Power Supply	750 W	710 W
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	140 W (0.05% THD)	125 W (0.05% THD)
Higher Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	175 W (0.7% THD)	165 W (0.7% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	250 W (10% THD)	235 W (10% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	205 W (1% THD)	200 W (1% THD)
Higher S/N Ratio (Line, IHF-A)	102 dB	100 dB
Higher DSD Sampling Rate via USB	5.6 MHz, 2.8 MHz	2.8 MHz
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz
Newer Bluetooth Version	3.0 + EDR	2.1 + EDR

This section shows those features and specifications which are the reason to choose Marantz SR7010 over Denon AVR-X6300H.

Marantz SR7010 has more advanced room correction system and more analog pre-outs. It supports front wide channels and Audyssey DSX. It has analog multi-channel input.

	Denon AVR-X6300H	Marantz SR7010
Front Wide Channel Support	✖	✔
Audyssey DSX	✖	✔
More Advanced Auto Speaker Calibration System	✔ Audyssey MultEQ XT32	✔ Audyssey MultEQ XT32 + PRO
More Component Video Inputs	2	3
Multi-Channel Input	✖	✔ 7.1
More Analog Pre-Outs	11.2	13.2
FL Display	✔ 2 lines	✔ 2 lines + port hole
Pre-programmed / Learnable / LCD Display	✔ / No / No	✔ / ✔ / ✔
Digital Radio	✖	✔ HD Radio
Higher FM S/N Ratio	Mono/Stereo: 70 dB/67 dB	Mono/Stereo/HD: 78 dB/68 dB/85 dB
Lower FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%	Mono/Stereo/HD: 0.1%/0.2%/0.02%
Wider AM Frequency Range	522 kHz - 1611 kHz	530 kHz - 1710 kHz

Denon AVR-X6300H and Marantz SR7010 share common strengths such as Dolby Atmos support, DTS:X support, Auro3D support, HDR10, Dolby Vision, DLNA 1.5 support, ethernet connection, wi-fi, bluetooth, phono input, analog pre-outs, internet radio, Pandora, Spotify and SiriusXM.

STRENGTHS	Denon AVR-X6300H	Marantz SR7010
Many Channel Processing	11.2	11.2
Dolby Atmos	✔ up to 7.1.4	✔ up to 7.1.4 or 9.1.2 with external amp
DTS:X	✔ up to 7.1.4	✔ up to 7.1.4 or 9.1.2 with external amp
DTS Neural:X	✔	✔
Auro 3D with Auro-Matic Upmixer	✔	✔
DSD via HDMI	✔ 2-ch/Multi-ch Input	✔ 2-ch/Multi-ch Input
DSD via USB	✔ 2-ch Input	✔ 2-ch Input
Audyssey Dynamic EQ	✔	✔
Audyssey Dynamic Volume	✔	✔
Audyssey LFC	✔	✔
Audyssey Sub EQ HT	✔	✔
HDR10	✔	✔
Dolby Vision	✔	✔ (via firmware update)
4K or 8K Video Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
4K or 8K Signal Upscaling	✔ up to 4K 50/60Hz 4:4:4	✔ up to 4K 50/60Hz 4:4:4
DLNA 1.5	✔	✔
Ethernet	✔	✔
Wi-Fi	✔	✔
Bluetooth	✔ SBC, AAC	✔
New HDCP Version	2.2	2.2
Many HDMI Inputs	8 (1 front)	8 (1 front)
Many HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (2 for MAIN, 1 for ZONE2)
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Front) for USB memory
Many Analog Audio Line Inputs	7 (1 front)	6 (1 front)
Phono Input	✔	✔
Composite Video Inputs	5 (1 front)	4 (1 front)
Component Video Inputs	2	3
Analog Pre-Outs	11.2	13.2
Zones	3	3
Analog Tuner	✔ FM/AM with RDS	✔ FM/AM
Internet Radio	✔ vTuner	✔
Pandora	✔	✔
Spotify	✔	✔
SiriusXM Internet Radio	✔	✔

Denon AVR-X6300H and Marantz SR7010 share common weaknesses such as no MHL input, no ChromeCast, no DTS Play-Fi and no SONOS.

WEAKNESSES	Denon AVR-X6300H	Marantz SR7010
No Dolby Atmos Height Virtualization	✖	✖
No DTS Virtual:X	✖	✖
No IMAX Enhanced	✖	✖
No HDR10+	✖	✖
No Dynamic HDR	✖	✖
No VRR	✖	✖
No QFT	✖	✖
No MHL Input	✖	✖
No FireConnect	✖	✖
No FlareConnect	✖	✖
No Chromecast Built-In	✖	✖
No DTS Play-Fi	✖	✖
Does Not Work with SONOS	✖	✖
No eARC	✖	✖
Old Bluetooth Version	3.0 + EDR	2.1 + EDR

Amplifier

Denon AVR-X6300H has 11 channel and Marantz SR7010 has 9 channel amplifiers. Denon AVR-X6300H delivers 140 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Marantz SR7010 delivers 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load.

Video Features

Both receivers support 4K passthrough up to 60p. They both do 4K upscaling up to 60p. The receivers support HDR10, Dolby Vision.

HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.

Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.

Dolby Atmos and Dolby Surround upmixer

Denon AVR-X6300H and Marantz SR7010 support Dolby Atmos with its Dolby Surround upmixer. The Denon AVR-X6300H can be configured upto 7.1.4 channels using internal amplifiers and the Marantz SR7010 can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 9.1.2 or 7.1.4 channels by adding 2 channel external amplifier.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X and Neural:X upmixer

Denon AVR-X6300H and Marantz SR7010 support DTS:X with its Neural:X upmixer. The Denon AVR-X6300H can be configured upto 7.1.4 channels using internal amplifiers. The Marantz SR7010 can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 9.1.2 or 7.1.4 channels by adding 2 channel external amplifier.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.

Auro-3D with its Auro-Matic upmixer

Denon AVR-X6300H and Marantz SR7010 support Auro-3D and its Auro-Matic upmixer via charged firmware upgrade. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

Current Feedback Topology

Marantz SR7010 features Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.

HDAM

Marantz SR7010 features exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.

D.D.S.C.

Denon AVR-X6300H has D.D.S.C (Dynamic Discrete Surround Circuit). A single IC chip is generally used in processing A/D, DSP, and D/A conversions that are vital to sound quality. The D.D.S.C. uses separate components to process the important sections of the A/D, DSP, and D/A conversions and therefore significantly improves signal processing capability and performance. In addition, the approach of developing and incorporating high-quality dedicated elements in the sections that configure the circuitry makes it easier to develop a high-grade, advanced surround circuit compared with the method where all processing is concentrated within a single chip. Denon’s proprietary digital audio technology that had for many years been developed for pure Hi-Fi components is now also alive in each block of the D.D.S.C.

MDAX2

Compressed music enhancement in Marantz SR7010 is done by Marantz’ MDAX2 technology. The use of compressed audio files like MP3, Windows Media™ Audio or AAC is getting more and more popular. The audio quality of these compressed files however is less than the original lossless files that are on a CD, especially lacking the higher frequencies and affecting the lower frequencies which make the audio image less wide and deep. The Marantz Digital Audio Expander 2, also called M-DAX2, recalculates the outputted frequency range. This enables you to get a more detailed and clearer sound.

Connectivity

Denon AVR-X6300H

Denon AVR-X6300H can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

Marantz SR7010

Marantz SR7010 can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver supports AirPlay. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 7.1 multi-channel analog inputs and 13.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Denon AVR-X6300H and here - Marantz SR7010.

BASICS	Denon AVR-X6300H	Marantz SR7010
Brand	Denon	Marantz
Model	AVR-X6300H	SR7010
Type	A/V Receiver	A/V Receiver
Country	UK	USA
Release Year	2016	2015

AMPLIFIER	Denon AVR-X6300H	Marantz SR7010
Channels	11.2	9.2
Front Wide Channel Support	✖	✔
Discrete Amplification	✔	✔
THX™ Certification	✖	✖
Continuous 6 Ω Rated	✔	✔
Certified 4 Ω Performance	✔	✔
Bi-amp Capability	✔ assignable	✔ assignable

AUDIO	Denon AVR-X6300H	Marantz SR7010
Maximum Channel Processing	11.2	11.2
Air Studios Monitor Certification	✖	✖
Dolby Atmos	✔ up to 7.1.4	✔ up to 7.1.4 or 9.1.2 with external amp
Dolby Atmos Height Virtualization	✖	✖
Dolby TrueHD	✔	✔
Dolby Digital Plus	✔	✔
Dolby Surround Upmixer	✔	✔
Dolby Pro Logic	✖	✖
Dolby Digital EX	✔	✔
Surround EX	✖	✖
DTS:X	✔ up to 7.1.4	✔ up to 7.1.4 or 9.1.2 with external amp
DTS Neural:X	✔	✔
DTS Virtual:X	✖	✖
DTS Neo	✖	✖
DTS-HD Master Audio	✔	✔
DTS-HD High Resolution Audio	✔	✔
DTS 96/24	✔	✔
DTS Express	✔	✔
DTS-ES	✔ Discrete 6.1, Matrix 6.1	✔ Discrete 6.1, Matrix 6.1
IMAX Enhanced	✖	✖
Auro 3D with Auro-Matic Upmixer	✔	✔
PCM	✔ 2-ch/Multi-ch Input	✔ 2-ch/Multi-ch Input
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Music Playback via USB and/or Network	✔ up to 192 kHz	✔ up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, AIFF, DSD	Apple Lossless, WAV, FLAC, AIFF, DSD
Multi-Channel Music File Playback via USB	✖	✖
Gapless Playback	✔	✔
DSD via HDMI	✔ 2-ch/Multi-ch Input	✔ 2-ch/Multi-ch Input
DSD via USB	✔ 2-ch Input	✔ 2-ch Input
DSD to PCM Converter	✖	✖
USB DAC	✖	✖
Jitter Reduction	✔	✔
DTS Dialogue Control	✔	✖
Dialog Enhancement	✔	✖
Dialog Level Adjustment	✔	✔
Dialog Normalization	✔	✔
Dialogue Lift	✖	✖
Compressed Music Enhancer	✔	✔ MDAX2
High-resolution Music Enhancer	✖	✖
Audyssey Dynamic EQ	✔	✔
Audyssey Dynamic Volume	✔	✔
Audyssey LFC	✔	✔
Audyssey Sub EQ HT	✔	✔
Audyssey DSX	✖	✔
Direct Mode	✔	✔
Pure Direct Mode	✔	✔
Independent Dual Subwoofer Output	✔	✔

CALIBRATION	Denon AVR-X6300H	Marantz SR7010
Auto Speaker Calibration System with Mic.	✔ Audyssey MultEQ XT32	✔ Audyssey MultEQ XT32 + PRO
Audyssey App Support	✔	✖
Optimized Bass Redirection	✔	✔
Bass Sync	✖	✖

VIDEO	Denon AVR-X6300H	Marantz SR7010
HDR10	✔	✔
HDR10+	✖	✖
Dynamic HDR	✖	✖
BT.2020 color space	✔	✔
Dolby Vision	✔	✔ (via firmware update)
Hybrid Log Gamma (HLG)	✔	✔ (via firmware update)
Quick Media Switching (QMS)	✖	✖
Auto Low Latency Mode (ALLM)	✔	✖
Variable Refresh Rate (VRR)	✖	✖
Quick Frame Transport (QFT)	✖	✖
3-D Ready	✔	✔
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	✔ up to 4K 50/60Hz 4:4:4	✔ up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion	✔ Component, Composite	✔ Component, Composite
Component Video Upscaling	✖	✖
Analog to Analog Video conversion	✖	✖
Component Video Maximum Resolution	1080p	1080p
isf Certified Calibration Control	✔	✔

CONNECTIVITY	Denon AVR-X6300H	Marantz SR7010
MHL Input	✖	✖
DLNA 1.5	✔	✔
FireConnect	✖	✖
FlareConnect	✖	✖
HEOS	✔	✖
Chromecast Built-In	✖	✖
DTS Play-Fi	✖	✖
Works with Amazon Alexa	✔	✖
Works with SONOS	✖	✖
AirPlay	✔ AirPlay 2	✔ AirPlay
Apple Product Connection	✔ iPod, iPhone and iPad	✔ iPod, iPhone and iPad
Remote App	✔ Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire	✔ Marantz Remote App for iOS and Android devices
InstaPrevue Input Source Prevue	✖	✖
Ethernet	✔	✔
Ethernet Switch	✖	✖
Wi-Fi	✔	✔
Bluetooth	✔ SBC, AAC	✔
HDBaseT Compatible	✖	✖
Enhanced Audio Return Channel (eARC)	✖	✖
HDCP Version	2.2	2.2
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (2 for MAIN, 1 for ZONE2)
USB Input	1 (Front) for iPod/iPhone and USB memory	1 (Front) for USB memory
USB DC Out Port	✖	✖
Analog Audio Line Inputs	7 (1 front)	6 (1 front)
Analog Audio Line Outputs	✖	✖
Phono Input	✔	✔
Optical Inputs	2	2
Optical Outputs	✖	✖
Coaxial Inputs/Outputs	2 / No	2 / No
Composite Video Inputs	5 (1 front)	4 (1 front)
Composite Video Outputs	1	1
S-Video Inputs	✖	✖
S-Video Outputs	✖	✖
Component Video Inputs	2	3
Component Video Outputs	1	1
PC In	✖	✖
Multi-Channel Input	✖	✔ 7.1
Analog Pre-Outs	11.2	13.2
XLR Inputs	✖	✖
XLR Pre-outs	✖	✖
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	HDMI, USB, Composite, L/R Audio
Speaker A/B	✔ assignable	✔ assignable
Headphone Out	✔ 6.3 mm	✔ 6.3 mm

ZONES	Denon AVR-X6300H	Marantz SR7010
Zones	3	3
Powered Zones	✔ 2 and 3	✔ 2 and 3
Zone 2 Outs	HDMI, Component, Composite, Pre Out	HDMI, Component, Composite, Pre Out
Zone 3 Outs	Pre Out	Pre Out
RS-232 Interface	✔	✔
+12V Trigger Output	2	2

MISC	Denon AVR-X6300H	Marantz SR7010
On-Screen Display	✔ Advanced Graphic User Interface	✔ Advanced Graphic User Interface
GUI Languages	9	3
FL Display	✔ 2 lines	✔ 2 lines + port hole
Remote Controller	RC-1211	RC026SR
Pre-programmed / Learnable / LCD Display	✔ / No / No	✔ / ✔ / ✔
Detachable Power Cord	✔	✔
Setup Assistant	✔	✔

RADIO	Denon AVR-X6300H	Marantz SR7010
Analog Tuner	✔ FM/AM with RDS	✔ FM/AM
Digital Radio	✖	✔ HD Radio
Internet Radio	✔ vTuner	✔
Pandora	✔	✔
Spotify	✔	✔
Tidal	✔	✖
Deezer	✔	✖
Napster	✔	✖
SiriusXM Internet Radio	✔	✔

CONSTRUCTION	Denon AVR-X6300H	Marantz SR7010
Front Panel	Metal	Aluminum
Speaker Terminals	11	11
Large Speaker Terminals	11	11
Color-Coded Speaker Terminals	✔	✔
Transparent High-Grade Speaker Terminals	✔	✖
High Grade Audio Components	✔	✔
Gold plated RCA terminals	✔	✔

POWER	Denon AVR-X6300H	Marantz SR7010
Power Supply	AC 230 V, 50/60 Hz	AC 120 V, 60 Hz
Power Consumption	750 W	710 W
No Sound Power	ECO On/Off: 65 W/110 W	ECO On/Off: 65 W/110 W
Standby Power	0.1 W	0.2 W

GENERAL	Denon AVR-X6300H	Marantz SR7010
ECO Mode / Hybrid Standby Function	✔	✔
Auto Power off	✔	✔
Dimensions (W x H x D)	434 mm x 167 mm x 393 mm (with antenna: 434 mm x 235 mm x 393 mm)	440 mm x 185 mm x 411 mm (with antenna: 440 mm x 247 mm x 411 mm) 17-3/8" x 7-3/8" x 16-1/4" (with antenna up: 17-3/8" x 9-3/4" x 16-1/4")
Weight	14.5 kg (31 lbs 15 oz)	13.8 kg (30 lbs 7 oz)
Warranty	3 Years	3 Years

SPECS	Denon AVR-X6300H	Marantz SR7010
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	140 W (0.05% THD)	125 W (0.05% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	175 W (0.7% THD)	165 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	250 W (10% THD)	235 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	205 W (1% THD)	200 W (1% THD)
THD digital	0.008% (1 kHz, at 0 dB)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.005% (20 Hz-20 kHz, Direct mode)	0.005% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)	2.5 mV	2.5 mV
Rated Output digital	2 V (at 0 dB playback)	2 V (at 0 dB playback)
S/N Ratio (Line, IHF-A)	102 dB	100 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	74 dB
S/N Ratio (digital)	102 dB	102 dB
Dynamic Range (digital)	100 dB	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz (HDMI)
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	2.8 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz to 60 MHz, 0 dB/-3 dB (Component)	5 Hz to 60 MHz, 0 dB/-3 dB (Component) 5 Hz to 10 MHz, 0 dB/-3 dB (Composite)
Ethernet Standard	100BASE-TX	100BASE-TX
Wi-Fi Standard	IEEE 802.11 b/g/n	IEEE 802.11 b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	2.4 GHz
Bluetooth Version	3.0 + EDR	2.1 + EDR
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	USB2.0 5V, 1 A
FM Frequency	87.5 MHz - 108.0 MHz	87.5 MHz - 107.9 MHz
FM Effective Sensitivity	1.2 µV (12.8 dBf)	1.5 µV (14.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB	Mono/Stereo/HD: 78 dB/68 dB/85 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%	Mono/Stereo/HD: 0.1%/0.2%/0.02%
AM Frequency	522 kHz - 1611 kHz	530 kHz - 1710 kHz
AM Effective Sensitivity	18 µV	20 µV

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted