Denon AVR-X4400H vs Pioneer VSX-1131 Detailed Comparison
image not found
SCORE:
93
SCORE:
84

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Denon AVR-X4400H to Pioneer VSX-1131 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X4400H has 9 channel and the Pioneer VSX-1131 has 7 channel amplifiers with Denon AVR-X4400H's being more powerful.

Let us have a look at some highlights of the models.

Denon AVR-X4400H Highlights

Pioneer VSX-1131 Highlights

  • 9.2 channels
  • 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • Dolby Atmos, DTS:X, Auro 3D capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay 2, DLNA, HEOS
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs
  • 7.2 channels
  • 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • Dolby Atmos, DTS:X capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay, Chromecast
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs

We have evaluated both receivers. Denon AVR-X4400H gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Denon AVR-X4400H

Pioneer VSX-1131

AMPLIFIER
92
VIDEO FEATURES
96
AUDIO FEATURES
93
CONNECTIVITY
91
MULTIZONE
93
MISCELLANEOUS
88
RADIO
92
OVERALL
93
AMPLIFIER
82
VIDEO FEATURES
92
AUDIO FEATURES
87
CONNECTIVITY
83
MULTIZONE
77
MISCELLANEOUS
63
RADIO
88
OVERALL
84

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Denon AVR-X4400H

This section shows those features and specifications which are the reason to choose Denon AVR-X4400H over Pioneer VSX-1131.

Denon AVR-X4400H has more channels, more power per channel, more channel processing, more zones and bigger power supply. It supports Auro3D, Amazon Alexa, Tidal, Deezer and Napster. It has analog pre-outs. In video department only Denon AVR-X4400H supports Hybrid Log Gamma.

Denon AVR-X4400H Pioneer VSX-1131
More Channels 9.2 7.2
Certified 4 Ω Performance
More Channel Processing 11.2 7.1
Dolby Digital EX
DTS Virtual:X via firmware update
Auro 3D with Auro-Matic Upmixer Built-In
Jitter Reduction
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Independent Dual Subwoofer Output
HLG
Auto Low Latency Mode Pass-through
Video Signal Upscaling up to 4K 50/60Hz 4:4:4 up to 4K
isf Certified Calibration Control
DLNA 1.5
Works with Amazon Alexa
AirPlay AirPlay 2 AirPlay
Enhanced Audio Return Channel (eARC)
More HDMI Inputs 8 (1 front) 7 (1 front)
More HDMI Outputs 3 (2 for MAIN, 1 for ZONE2) 2 (simultaneous)
More Analog Audio Line Inputs 6 (1 front) 5 (1 front)
More Coaxial Inputs/Outputs 2 / 1 /
More Composite Video Inputs 4 (1 front) 2
More Composite Video Outputs 1
More Component Video Inputs 2 1
More Component Video Outputs 1
More Analog Pre-Outs 11.2 0.2
Front A/V Inputs HDMI, USB, Composite, L/R Audio HDMI, USB, Mini-Jack
More Zones 3 2
More Powered Zones 2 and 3 2
Zone 2 Outs HDMI, Component, Composite, Pre Out Line Out
RS-232 Interface
+12V Trigger Output 2
Remote (IR) Input/Output 1 / 1 0 / 0
Detachable Power Cord
Tidal
Deezer
Napster
More Speaker Terminals 11 9
More Large Speaker Terminals 11 9
Color-Coded Speaker Terminals
Gold plated RCA terminals
Bigger Power Supply 710 W 570 W
Longer Warranty 3 Years 1 Year Parts & Labor
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) 125 W (0.05% THD) 100 W (0.08% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 235 W (10% THD) 175 W (10% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC) 200 W (1% THD) 160 W (1% THD)
Higher Dynamic Power per Channel, 8 Ω, Front) 130 W x 2-channel 120 W

Advantage of Pioneer VSX-1131

This section shows those features and specifications which are the reason to choose Denon AVR-X4400H over Pioneer VSX-1131.

Denon AVR-X4400H has more channels, more power per channel, more channel processing, more zones and bigger power supply. It supports Auro3D, Amazon Alexa, Tidal, Deezer and Napster. It has analog pre-outs. In video department only Denon AVR-X4400H supports Hybrid Log Gamma.

Denon AVR-X4400H Pioneer VSX-1131
Music Playback via USB MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD MP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Audio Formats via USB Apple Lossless, WAV, FLAC, DSD Apple Lossless, WAV, FLAC, AIFF, DSD
Multi-Channel Music File Playback via USB up to 192 kHz/24 bit
FireConnect
Chromecast Built-In
Pandora
Higher Dynamic Power per Channel, 4 Ω, Front) 190 W x 2-channel 210 W
Higher S/N Ratio (Line, IHF-A) 102 dB 106 dB
Higher S/N Ratio (Phono MM, IHF-A) 74 dB 80 dB
Newer Bluetooth Version 3.0 + EDR 4.1 + LE
Wider AM Frequency Range 522 kHz - 1611 kHz 522/530 kHz - 1611/1710 kHz

Common Strengths and Weaknesses

Here we list common strengths and weaknesses of both receivers.

STRENGTHS
Bi-amp Capability 👍
Dolby Atmos 👍
Dolby TrueHD 👍
Dolby Digital Plus 👍
Dolby Surround Upmixer 👍
DTS:X 👍
DTS Neural:X 👍
DTS-HD Master Audio 👍
DTS-HD High Resolution Audio 👍
DTS 96/24 👍
DTS Express 👍
DTS-ES 👍
High Resolution Music Playback via USB and/or Network 👍
Gapless Playback 👍
DSD via HDMI 👍
DSD via USB 👍
Compressed Music Enhancer 👍
Auto Speaker Calibration System with Mic. 👍
HDR10 👍
BT.2020 color space 👍
Dolby Vision 👍
3-D Ready 👍
4K or 8K Video Passthrough 👍
4K or 8K Signal Upscaling 👍
Analog To HDMI Upconversion 👍
Ethernet 👍
Wi-Fi 👍
Bluetooth 👍
New HDCP Version 👍
Many HDMI Inputs 👍
USB Input 👍
Phono Input 👍
Composite Video Inputs 👍
Component Video Inputs 👍
Zones 👍
Analog Tuner 👍
Spotify 👍
WEAKNESSES
No Front Wide Channel Support 👎
No Dolby Atmos Height Virtualization 👎
No IMAX Enhanced 👎
No High-resolution Music Enhancer 👎
No HDR10+ 👎
Does Not Work with SONOS 👎
No Multi-Channel Input 👎
No SiriusXM Internet Radio 👎

Selected Features

Amplifier

Denon AVR-X4400H has 9 channel and Pioneer VSX-1131 has 7 channel amplifiers. Denon AVR-X4400H delivers 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Pioneer VSX-1131 delivers 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load. Since 2016 all receiver manufacturers have dropped front wide channel support and these models are no exceptions.


Video Features

Both receivers support 4K passthrough up to 60p. Denon AVR-X4400H can do 4K upscaling up to 60p and Pioneer VSX-1131 can do 4K upscaling up to 30p. The receivers support HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Denon AVR-X4400H and Pioneer VSX-1131 support Dolby Atmos with its Dolby Surround upmixer. The Denon AVR-X4400H can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier and the Pioneer VSX-1131 can be configured upto 5.1.2 channels using internal amplifiers.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Denon AVR-X4400H and Pioneer VSX-1131 support DTS:X with its Neural:X upmixer. The Denon AVR-X4400H can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier. The Pioneer VSX-1131 can be configured upto 5.1.2 channels using internal amplifiers.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Auro-3D with its Auro-Matic upmixer

Denon AVR-X4400H supports Auro-3D and its Auro-Matic upmixer out of the box or after free firmware update. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.


D.D.S.C.

Denon AVR-X4400H has D.D.S.C (Dynamic Discrete Surround Circuit). A single IC chip is generally used in processing A/D, DSP, and D/A conversions that are vital to sound quality. The D.D.S.C. uses separate components to process the important sections of the A/D, DSP, and D/A conversions and therefore significantly improves signal processing capability and performance. In addition, the approach of developing and incorporating high-quality dedicated elements in the sections that configure the circuitry makes it easier to develop a high-grade, advanced surround circuit compared with the method where all processing is concentrated within a single chip. Denon’s proprietary digital audio technology that had for many years been developed for pure Hi-Fi components is now also alive in each block of the D.D.S.C.


Advanced AL32 Processing

Denon AVR-X4400H has Advanced AL32 Processing which uses a unique data interpolation algorithm to achieve high-bit, high-sampling output performance. The volume of information has been dramatically improved without any loss in the original data. The clean playback sound free of interference makes it possible to enjoy delicate details, accurate localization, and rich expression in the lower range. Advanced AL32 Processing has three functions: 1. High-bit up-conversion (Adaptive Line Pattern Harmonized Algorithm), 2. Advanced ALPHA Processing and 3. Adaptive digital filter (Automatic Low-Pass filter Harmonic Adjustment).


Advanced Sound Retriever

Compressed music enhancement in Pioneer VSX-1131 is done by Pioneer’s Advanced Sound Retriever. Hear the detail, warmth and clarity, the way the artist intended it, from all of your highly compressed MP3 and WMA files stored on USB, Smartphone and portable media players. By restoring data that tend to get lost in the digital compression process, Pioneers Advanced Sound Retriever Technology enhances audio reproduction all the way upto 20 Khz frequencies.


Connectivity


Denon AVR-X4400H

Denon AVR-X4400H can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports[y] AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

Image cannot be found Image cannot be found

Pioneer VSX-1131

Pioneer VSX-1131 can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver supports[y] AirPlay. It has 7 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver.

Front panel has HDMI, USB and Mini-Jack inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Denon AVR-X4400H and here - Pioneer VSX-1131.

BASICS Denon AVR-X4400H Pioneer VSX-1131
BrandDenonPioneer
ModelAVR-X4400HVSX-1131
TypeA/V ReceiverA/V Receiver
CountryUKAsia
Release Year20172017
AMPLIFIER Denon AVR-X4400H Pioneer VSX-1131
Channels9.27.2
Front Wide Channel Support
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability assignable
AUDIO Denon AVR-X4400H Pioneer VSX-1131
Digital Signal Processing (DSP) Engine4 powerful high speed 4th generation SHARC DSP processorsCirrus Logic (Quad Core) x 1
DACAKM AK4458VNAKM AK4458
Maximum Channel Processing11.27.1
Air Studios Monitor Certification
Dolby Atmos up to 7.1.4
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
Surround EX
DTS:X up to 7.1.4
DTS Neural:X
DTS Virtual:X via firmware update
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES Discrete 6.1, Matrix 6.1 Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer Built-In
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBMP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSDMP3, WMA, AAC, Apple Lossless, WAV, FLAC, AIFF, DSD
High Resolution Music Playback via USB and/or Network up to 192 kHz 64, 88.2, 96, 176.4, 192 kHz/24 bit
High Resolution Audio Formats via USBApple Lossless, WAV, FLAC, DSDApple Lossless, WAV, FLAC, AIFF, DSD
Multi-Channel Music File Playback via USB up to 192 kHz/24 bit
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD via USB 2-ch Input 2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction
Dialog Enhancement
Dialogue Lift
Compressed Music Enhancer Advanced Sound Retriever
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Direct Mode
Independent Dual Subwoofer Output
CALIBRATION Denon AVR-X4400H Pioneer VSX-1131
Auto Speaker Calibration System with Mic. Audyssey MultEQ XT32 MCACC
VIDEO Denon AVR-X4400H Pioneer VSX-1131
HDR10
HDR10+
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode Pass-through
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 4K/60p (4:4:4 24-bit)
4K/60p (4:2:0 36-bit)
4K/24p (4:4:4 36-bit)
Video Signal Upscaling up to 4K 50/60Hz 4:4:4 up to 4K
Analog To HDMI Upconversion Component**, Composite Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control
CONNECTIVITY Denon AVR-X4400H Pioneer VSX-1131
MHL Input
DLNA 1.5
FireConnect
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay AirPlay 2 AirPlay
Apple Product Connection iPod, iPhone and iPad iPod, iPhone and iPad (Airplay only)
Remote App Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire iControlAV5 (for iOS and Android)
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi
Bluetooth SBC
HDBaseT Compatible
Enhanced ARC
HDCP Version2.22.2
HDMI Input8 (1 front)7 (1 front)
HDMI Output3 (2 for MAIN, 1 for ZONE2)2 (simultaneous)
USB Input1 (Front) for iPod/iPhone and USB memory1 Front
USB DC Out Port
Analog Audio Line Input6 (1 front)5 (1 front)
Analog Audio Line Output
Phono Input
Optical In22
Optical Out
Coaxial In/Out2 / 1 /
Composite Video Input4 (1 front)2
Composite Video Output1
S-Video Input
S-Video Output
Component Video Input21
Component Video Output1
PC In
Multi-Channel Input
Analog Pre-Outs11.20.2
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMI, USB, Composite, L/R AudioHDMI, USB, Mini-Jack
Speaker A/B assignable
Headphone Out 6.3 mm 6.3 mm
ZONES Denon AVR-X4400H Pioneer VSX-1131
Zones32
Powered Zones 2 and 3 2
Zone 2HDMI, Component, Composite, Pre OutLine Out
RS-232
+12V Trigger Output2
Remote (IR) Input/Output1 / 10 / 0
MISC Denon AVR-X4400H Pioneer VSX-1131
On-Screen Display Advanced Graphic User InterfaceIcon-based Graphical User Interface (GUI)
Remote ControllerRC-1219
Detachable Power Cord
RADIO Denon AVR-X4400H Pioneer VSX-1131
Analog Tuner FM/AM with RDS FM/AM with RDS
Digital Radio
Internet Radio TuneIn TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION Denon AVR-X4400H Pioneer VSX-1131
Front PanelMetalBrushed
Speaker Terminals119
Large Speaker Terminals119
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
Gold plated RCA terminals
POWER Denon AVR-X4400H Pioneer VSX-1131
Power SupplyAC 230 V, 50/60 HzAC 220-240 V, 50/60 Hz
Power Consumption710 W570 W
No Sound PowerECO On/Off: 65 W/110 W65 W
Standby Power0.1 W0.15 W
GENERAL Denon AVR-X4400H Pioneer VSX-1131
Auto Power off
Dimensions (W x H x D)434 mm x 167 mm x 389 mm (with antenna: 434 mm x 236 mm x 389 mm)
17 1/8" x 6 5/8" x 15 3/8" (with antenna: 17 1/8" x 9 3/8" x 15 3/8")
435 mm x 173 mm x 370.5 mm
17-1/8" x 6-13/16" x 14-9/16"
Weight13.7 kg (30 lbs 3 oz)10.0 kg (22 lbs)
Warranty3 Years1 Year Parts & Labor
SPECS Denon AVR-X4400H Pioneer VSX-1131
Power Output (8 Ω, 20 Hz - 20 kHz, 2125 W (0.05% THD)100 W (0.08% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)235 W (10% THD)175 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)200 W (1% THD)160 W (1% THD)
Dynamic Power per Channel (4 Ω, Front)190 W x 2-channel210 W
Dynamic Power per Channel (8 Ω, Front)130 W x 2-channel120 W
Input Sensitivity and Impedance (Line)200 mV/47 kΩ200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)2.5 mV3.5 mV/47 kΩ
S/N Ratio (Line, IHF-A)102 dB106 dB
S/N Ratio (Phono MM, IHF-A)74 dB80 dB
Frequency Response (Analog In)+1/-3 dB (10 Hz to 100 kHz, Direct mode)10 Hz - 100 kHz/+1 dB, -3 dB (Pure Direct)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
DSD Sampling Rates via USB5.6 MHz, 2.8 MHz5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
Ethernet Standard100BASE-TX10BASE-T/100BASE-TX
Wi-Fi StandardIEEE 802.11 a/b/g/nIEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency5 GHz, 2.4 GHzDual band 2.4 GHz, 5 GHz
Bluetooth Version3.0 + EDR4.1 + LE
Bluetooth Frequency2.4 GHz2.4 GHz
USB TerminalUSB2.0 5V, 1 AUSB2.0 (Type A) 5 V, 1 A
FM Frequency87.5 MHz - 108.0 MHz87.5 MHz - 108.0 MHz
AM Frequency522 kHz - 1611 kHz522/530 kHz - 1611/1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.