Denon AVR-X4400H vs Onkyo TX-NR414 Detailed Comparison
image not found
SCORE:
93
SCORE:
66

Disclosure: We earn money from the affiliate links to products associated with content in this article.

Overview

Here we are comparing Denon AVR-X4400H to Onkyo TX-NR414 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Denon AVR-X4400H has 9 channel and the Onkyo TX-NR414 has 5 channel amplifiers with Denon AVR-X4400H's being more powerful.

Let us have a look at some highlights of the models.

Denon AVR-X4400H Highlights

Onkyo TX-NR414 Highlights

  • 9.2 channels
  • 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • Dolby Atmos, DTS:X, Auro 3D capable
  • HDR10, Dolby Vision, 4K Upscaling, 4K Passthrough
  • AirPlay 2, DLNA, HEOS
  • Ethernet, Wi-Fi, Bluetooth
  • USB and Phono inputs
  • 5.1 channels
  • 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
  • 1080p Passthrough
  • DLNA
  • Ethernet, Wi-Fi
  • USB input

We have evaluated both receivers. Denon AVR-X4400H gets higher overall score in our ranking system which is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

Denon AVR-X4400H

Onkyo TX-NR414

AMPLIFIER
92
VIDEO FEATURES
96
AUDIO FEATURES
93
CONNECTIVITY
91
MULTIZONE
93
MISCELLANEOUS
88
RADIO
92
OVERALL
93
AMPLIFIER
76
VIDEO FEATURES
45
AUDIO FEATURES
68
CONNECTIVITY
74
MULTIZONE
64
MISCELLANEOUS
61
RADIO
85
OVERALL
66

Amplifier score is based on power ratings, minimum impedance load, power supply, transformer type, total harmonic distortion, damping factor, signal to noise ratio and other small details. Audio score depends on the number of channels, front wide channel support, maximum channel processing, support of audio formats, DAC specifications, room calibration algorithm... Video score is based on HDR, Dolby Vision and 4K passthrough, upscaling, analog to HDMI upconversion. Connectivity score is defined from all wired and wireless inputs and outputs, internet and bluetooth connections, HEOS, SONOS and others. Multizone score depends on the number of zones with their outputs. Radio score is evaluated form digital radio support and analog tuner with its frequency range, signal to noise ratio, harmonic distortion...

Advantage of Denon AVR-X4400H

This section shows those features and specifications which are the reason to choose Denon AVR-X4400H over Onkyo TX-NR414.

Denon AVR-X4400H has more channels, more power per channel, more channel processing, room correction system, more zones, bigger power supply and higher signal to noise ratio. It supports Dolby Atmos, DTS:X, Auro3D, DSD streaming via USB, gapless playback, Amazon Alexa, Tidal, Deezer and Napster. It has bi-amp capability, DTS Dialog Control, phono input and analog pre-outs. In video department only Denon AVR-X4400H supports HDR10, Dolby Vision and Hybrid Log Gamma.

Denon AVR-X4400H Onkyo TX-NR414
More Channels 9.2 5.1
Certified 4 Ω Performance
Bi-amp capability assignable
More Channel Processing 11.2 5.1
Dolby Atmos up to 7.1.4
Dolby Surround Upmixer
Dolby Digital EX
DTS:X up to 7.1.4
DTS Neural:X
DTS Virtual:X via firmware update
DTS-ES Discrete 6.1, Matrix 6.1
Auro 3D with Auro-Matic Upmixer Built-In
Gapless Playback
DSD via USB 2-ch Input
DTS Dialog Control
Dialog Level Adjustment
Dialog Normalization
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Independent Dual Subwoofer Output
More Advanced Auto Speaker Calibration System Audyssey MultEQ XT32
HDR10
BT.2020 color space
Dolby Vision
HLG
Auto Low Latency Mode Pass-through
Video Signal Passthrough up to 4K 50/60Hz 4:4:4 up to 1080p
Video Signal Upscaling up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion Component**, Composite
isf Certified Calibration Control
Works with Amazon Alexa
AirPlay AirPlay 2
Wi-Fi via Front USB (optional UWF-1 sold separately)
Bluetooth SBC
Enhanced Audio Return Channel (eARC)
More HDMI Inputs 8 (1 front) 6
More HDMI Outputs 3 (2 for MAIN, 1 for ZONE2) 1
Phono Input
More Analog Pre-Outs 11.2 0.1
Front A/V Inputs HDMI, USB, Composite, L/R Audio USB, Composite Video, RCA Audio
Speaker A/B assignable
More Zones 3 2
More Powered Zones 2 and 3
Zone 2 Outs HDMI, Component, Composite, Pre Out RCA Line Out
RS-232 Interface
+12V Trigger Output 2
Remote (IR) Input/Output 1 / 1
Analog Tuner FM/AM with RDS FM/AM
Tidal
Deezer
Napster
More Speaker Terminals 11 5
More Large Speaker Terminals 11 5
Gold plated RCA terminals
Bigger Power Supply 710 W 4.2 A
Longer Warranty 3 Years 2 Years
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC) 125 W (0.05% THD) 80 W (0.7% THD)
Higher Power Output (6 Ω, 1 kHz, 2 channel driven, FTC) 165 W (0.7% THD) 110 W (0.9% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA) 235 W (10% THD) 160 W
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC) 200 W (1% THD) 130 W (1% THD)
Higher Dynamic Power per Channel, 4 Ω, Front) 190 W x 2-channel 160 W
Higher Dynamic Power per Channel, 8 Ω, Front) 130 W x 2-channel 100 W
Higher Rated Lineout Level 1.2 V 200 mV/2.2 kΩ
Higher S/N Ratio (Line, IHF-A) 102 dB 100 dB

Advantage of Onkyo TX-NR414

This section shows those features and specifications which are the reason to choose Denon AVR-X4400H over Onkyo TX-NR414.

Denon AVR-X4400H has more channels, more power per channel, more channel processing, room correction system, more zones, bigger power supply and higher signal to noise ratio. It supports Dolby Atmos, DTS:X, Auro3D, DSD streaming via USB, gapless playback, Amazon Alexa, Tidal, Deezer and Napster. It has bi-amp capability, DTS Dialog Control, phono input and analog pre-outs. In video department only Denon AVR-X4400H supports HDR10, Dolby Vision and Hybrid Log Gamma.

Denon AVR-X4400H Onkyo TX-NR414
Dolby Pro Logic PLII
DTS Neo Neo:6
Music Playback via USB MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD FLAC, WAV, WMA, WMA Lossless, Ogg, MP3, LPCM, AAC
High Resolution Audio Formats via USB Apple Lossless, WAV, FLAC, DSD FLAC, WAV, WMA Lossless, LPCM, AAC
InstaPrevue Input Source Prevue
More Composite Video Inputs 4 (1 front) 5 (1 front)
Pandora
Wider AM Frequency Range 522 kHz - 1611 kHz 522/530 kHz - 1611/1710 kHz

Common Strengths and Weaknesses

Here we list common strengths and weaknesses of both receivers.

STRENGTHS
Dolby TrueHD 👍
Dolby Digital Plus 👍
DTS-HD Master Audio 👍
DTS-HD High Resolution Audio 👍
DTS 96/24 👍
DTS Express 👍
High Resolution Music Playback via USB and/or Network 👍
DSD via HDMI 👍
Compressed Music Enhancer 👍
3-D Ready 👍
DLNA 1.5 👍
Ethernet 👍
Wi-Fi 👍
New HDCP Version 👍
USB Input 👍
Many Analog Audio Line Inputs 👍
Composite Video Inputs 👍
Composite Video Outputs 👍
Component Video Inputs 👍
Component Video Outputs 👍
Zones 👍
Detachable Power Cord 👍
Analog Tuner 👍
Spotify 👍
WEAKNESSES
No Dolby Atmos Height Virtualization 👎
No IMAX Enhanced 👎
No High-resolution Music Enhancer 👎
No HDR10+ 👎
No Chromecast Built-In 👎
Does Not Work with SONOS 👎
No Multi-Channel Input 👎
No SiriusXM Internet Radio 👎

Selected Features

Amplifier

Denon AVR-X4400H has 9 channel and Onkyo TX-NR414 has 5 channel amplifiers. Denon AVR-X4400H delivers 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and Onkyo TX-NR414 delivers 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and they both have stable performance at 4 Ω load.


Video Features

Denon AVR-X4400H supports 4K passthrough up to 60p and Onkyo TX-NR414 supports 1080p passthrough. Denon AVR-X4400H can do 4K upscaling up to 60p. Denon AVR-X4400H supports HDR10, Dolby Vision.


HDR10

High-dynamic-range (HDR) video has greater dynamic range than standard-dynamic-range (SDR) video with brigter whites and deeper blacks. HDR10 was announced on August 27, 2015, by the Consumer Technology Association and uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports up to 1000 nits of brightness and 10-bit color which corresponds to 1024 shades of the primary RGB colors.


Dolby Vision

Dolby Vision is an update to HDR10 by adding dynamic metadata that can be used to more accurately adjust brightness levels up to 10,000 nits maximum brightness on a scene-by-scene or frame-by-frame basis and supports up to 12-bit color depth (4096 shades of RGB) and 8K resolution.


Dolby Atmos and Dolby Surround upmixer

Denon AVR-X4400H supports Dolby Atmos with its Dolby Surround upmixer. It can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

Dolby Atmos is the first cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound - the helicopter, a car screeching around a corner, a melodic bird call - can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. You'll feel like you're inside the action, in ways you've never experienced before.

Dolby Atmos for the home represents every sound in the original cinema mix as an audio object. Extensions to the Dolby Audio™ codecs, along with an advanced scalable algorithm, allow Dolby Atmos to be delivered via Blu-ray Disc and streaming media. A spatially-coded substream is added to Dolby TrueHD or Dolby Digital Plus. A Dolby Atmos audio/video receiver (AVR) adapts the cinema experience to your home theater from seven speakers to as many as 34 in 24.1.10 configuration, recreating the original artistic concept. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.

If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.


DTS:X and Neural:X upmixer

Denon AVR-X4400H supports DTS:X. It can be configured upto 7.1.2 or 5.1.4 channels using internal amplifiers or upto 7.1.4 channels by adding 2 channel external amplifier.

A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.

DTS Neural:X is an upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.


Auro-3D with its Auro-Matic upmixer

Denon AVR-X4400H supports Auro-3D and its Auro-Matic upmixer out of the box or after free firmware update. Auro-3D is an immersive 3D audio format developed by the Belgium-based company Auro Technologies. It consists of three layers of sound - surround, height and overhead ceiling. The base horizontal layer uses 5.1 or 7.1 format, the height layer is on top of the base layer and its information is extracted from the standard 5.1 surround PCM carrier. The a/v receiver decoder then extracts this information during playback. In home cinema Auro-3D comes with different listening formats - Auro 9.1, Auro 10.1 with added Top Ceiling channel ("Voice of God"), Auro 11.1 with added Front Height Center channel, and Auro 13.1 with added Left Rear Surround & Right Rear Surround channel. Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.


WRAT

Onkyo TX-NR414 features Onkyo’s Wide Range Amp Technology (WRAT) circuit layout that prevents phase shifting by pushing the roll-off point higher than the listening-level frequency. Amplifying sound without phase shift creates an uncommonly well-focused and realistic audio image. If phase shift occurs and signal timing is not accurate, then neither is the resulting audio image.


D.D.S.C.

Denon AVR-X4400H has D.D.S.C (Dynamic Discrete Surround Circuit). A single IC chip is generally used in processing A/D, DSP, and D/A conversions that are vital to sound quality. The D.D.S.C. uses separate components to process the important sections of the A/D, DSP, and D/A conversions and therefore significantly improves signal processing capability and performance. In addition, the approach of developing and incorporating high-quality dedicated elements in the sections that configure the circuitry makes it easier to develop a high-grade, advanced surround circuit compared with the method where all processing is concentrated within a single chip. Denon’s proprietary digital audio technology that had for many years been developed for pure Hi-Fi components is now also alive in each block of the D.D.S.C.


Advanced AL32 Processing

Denon AVR-X4400H has Advanced AL32 Processing which uses a unique data interpolation algorithm to achieve high-bit, high-sampling output performance. The volume of information has been dramatically improved without any loss in the original data. The clean playback sound free of interference makes it possible to enjoy delicate details, accurate localization, and rich expression in the lower range. Advanced AL32 Processing has three functions: 1. High-bit up-conversion (Adaptive Line Pattern Harmonized Algorithm), 2. Advanced ALPHA Processing and 3. Adaptive digital filter (Automatic Low-Pass filter Harmonic Adjustment).


Advanced Music Optimizer

Compressed music enhancement in Onkyo TX-NR414 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.


Connectivity


Denon AVR-X4400H

Denon AVR-X4400H can be connected to internet using ethernet cable or built-in wi-fi adapter. It can also connect to bluetooth devices via built-in bluetooth adapter. The Receiver works with Amazon Alexa and supports[y] AirPlay 2. It has 8 HDMI inputs with HDCP 2.2 copy protection. There is a phono input with built-in phono stage for connecting the cartridge output of the turntable directly to the Receiver. There are 11.2 channel analog pre-outs for external amplification.

Front panel has HDMI, USB, Composite and L/R Audio inputs.

Image cannot be found Image cannot be found

Onkyo TX-NR414

Onkyo TX-NR414 can be connected to internet using ethernet cable or wirelessly[y] via Front USB (optional UWF-1 sold separately). It has 6 HDMI inputs with HDCP 2.2 copy protection.

Front panel has USB, Composite Video and RCA Audio inputs.

Image cannot be found Image cannot be found

Detailed Specifications

And in the end let us list the detailed specifications of the receivers side-by-side.

Note: The following table shows only those details which are applicable for both models and excludes the ones that are applicable for only one model. If you want to see a full list of specs for each model please visit their individual pages here - Denon AVR-X4400H and here - Onkyo TX-NR414.

BASICS Denon AVR-X4400H Onkyo TX-NR414
BrandDenonOnkyo
ModelAVR-X4400HTX-NR414
TypeA/V ReceiverA/V Receiver
CountryUKTaiwan
Release Year20172012
AMPLIFIER Denon AVR-X4400H Onkyo TX-NR414
Channels9.25.1
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability assignable
AUDIO Denon AVR-X4400H Onkyo TX-NR414
Digital Signal Processing (DSP) Engine4 powerful high speed 4th generation SHARC DSP processorsAdvanced 32-Bit Processing DSP Chip
DACAKM AK4458VNBurr-Brown
Maximum Channel Processing11.25.1
Air Studios Monitor Certification
Dolby Atmos up to 7.1.4
Dolby Atmos Height Virtualization
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic PLII
Dolby Digital EX
Surround EX
DTS:X up to 7.1.4
DTS Neural:X
DTS Virtual:X via firmware update
DTS Neo Neo:6
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer Built-In
PCM 2-ch/Multi-ch Input 2-ch/Multi-ch Input
Music Playback via USBMP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSDFLAC, WAV, WMA, WMA Lossless, Ogg, MP3, LPCM, AAC
High Resolution Music Playback via USB and/or Network up to 192 kHz up to 192 kHz
High Resolution Audio Formats via USBApple Lossless, WAV, FLAC, DSDFLAC, WAV, WMA Lossless, LPCM, AAC
Multi-Channel Music File Playback via USB
Gapless Playback
DSD via HDMI 2-ch/Multi-ch Input 2-ch/Multi-ch Input
DSD via USB 2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialog Control
Dialog Enhancement
Dialog Level Adjustment
Dialog Normalization
Dialogue Lift
Compressed Music Enhancer Advanced Music Optimizer
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Independent Dual Subwoofer Output
CALIBRATION Denon AVR-X4400H Onkyo TX-NR414
Auto Speaker Calibration System with Mic. Audyssey MultEQ XT32
VIDEO Denon AVR-X4400H Onkyo TX-NR414
HDR10
HDR10+
BT.2020 color space
Dolby Vision
Hybrid Log Gamma (HLG)
Quick Media Switching (QMS)
Auto Low Latency Mode Pass-through
Variable Refresh Rate (VRR)
Quick Frame Transport (QFT)
3-D Ready
Video Signal Passthroughup to 4K 50/60Hz 4:4:4up to 1080p
Video Signal Upscaling up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control
CONNECTIVITY Denon AVR-X4400H Onkyo TX-NR414
MHL Input
DLNA 1.5
FireConnect
FlareConnect
Chromecast Built-In
DTS Play-Fi
Works with Amazon Alexa
Works with SONOS
AirPlay AirPlay 2
Apple Product Connection iPod, iPhone and iPad iPod and iPhone via front USB
Remote App Denon 2016 AVR Remote App for iOS and Android devices and Kindle Fire iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue
Ethernet
Ethernet Switch
Wi-Fi via Front USB (optional UWF-1 sold separately)
Bluetooth SBC
HDBaseT Compatible
Enhanced ARC
HDCP Version2.22.2
HDMI Input8 (1 front)6
HDMI Output3 (2 for MAIN, 1 for ZONE2)1
USB Input1 (Front) for iPod/iPhone and USB memory1 Front (for iPod/iPhone)
USB DC Out Port
Analog Audio Line Input6 (1 front)6 (1 front)
Analog Audio Line Output
Phono Input
Optical In22
Optical Out
Coaxial In/Out2 / 2 /
Composite Video Input4 (1 front)5 (1 front)
Composite Video Output11
S-Video Input
S-Video Output
Component Video Input22
Component Video Output11
PC In
Multi-Channel Input
Analog Pre-Outs11.20.1
XLR Inputs
XLR Pre-outs
Front A/V InputsHDMI, USB, Composite, L/R AudioUSB, Composite Video, RCA Audio
Speaker A/B assignable
Headphone Out 6.3 mm 6.3 mm
ZONES Denon AVR-X4400H Onkyo TX-NR414
Zones32
Powered Zones 2 and 3
Zone 2HDMI, Component, Composite, Pre OutRCA Line Out
RS-232
+12V Trigger Output2
Remote (IR) Input/Output1 / 1
MISC Denon AVR-X4400H Onkyo TX-NR414
On-Screen Display Advanced Graphic User Interface Basic Overlay
Detachable Power Cord
RADIO Denon AVR-X4400H Onkyo TX-NR414
Analog Tuner FM/AM with RDS FM/AM
Digital Radio
Internet Radio TuneIn vTuner
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM Internet Radio
CONSTRUCTION Denon AVR-X4400H Onkyo TX-NR414
Speaker Terminals115
Large Speaker Terminals115
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
Gold plated RCA terminals
POWER Denon AVR-X4400H Onkyo TX-NR414
Power SupplyAC 230 V, 50/60 HzAC 120 V, 60 Hz
Power Consumption710 W4.2 A
No Sound PowerECO On/Off: 65 W/110 W55 W
Standby Power0.1 W0.2 W
GENERAL Denon AVR-X4400H Onkyo TX-NR414
ECO Mode / Hybrid Standby Function
Dimensions (W x H x D)434 mm x 167 mm x 389 mm (with antenna: 434 mm x 236 mm x 389 mm)
17 1/8" x 6 5/8" x 15 3/8" (with antenna: 17 1/8" x 9 3/8" x 15 3/8")
435 mm x 173.5 mm x 328 mm
17-1/8" x 6-13/16" x 12-15/16"
Weight13.7 kg (30 lbs 3 oz)8.6 kg (19.0 lbs)
Warranty3 Years2 Years
SPECS Denon AVR-X4400H Onkyo TX-NR414
Power Output (8 Ω, 20 Hz - 20 kHz, 2125 W (0.05% THD)80 W (0.7% THD)
Power Output (6 Ω, 1 kHz, 2165 W (0.7% THD)110 W (0.9% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)235 W (10% THD)160 W
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)200 W (1% THD)130 W (1% THD)
Dynamic Power per Channel (4 Ω, Front)190 W x 2-channel160 W
Dynamic Power per Channel (8 Ω, Front)130 W x 2-channel100 W
Input Sensitivity and Impedance (Line)200 mV/47 kΩ200 mV/47 kΩ (Line)
Rated Lineout Level and Impedance1.2 V200 mV/2.2 kΩ
S/N Ratio (Line, IHF-A)102 dB100 dB
Frequency Response (Analog In)+1/-3 dB (10 Hz to 100 kHz, Direct mode)5 Hz - 100 kHz/+1 dB, -3 dB (DSP bypass)
DSD Sampling Rates via HDMI2.8 MHz2.8 MHz
Video Input Sensitivity/Output Level and Impedance1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
1 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
Video Frequency Response5 Hz to 60 MHz, 0 dB/-3 dB (Component)5 Hz - 100 MHz/+0 dB, -3 dB (Component)
Ethernet Standard100BASE-TX100BASE-TX
FM Frequency87.5 MHz - 108.0 MHz87.5 MHz - 108.0 MHz
AM Frequency522 kHz - 1611 kHz522/530 kHz - 1611/1710 kHz

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted

Amazon Affiliate Disclosure

ZKelectronics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon (.com, .co.uk, .ca, etc) and any other websites that may be affiliated with Amazon Service LLC Associates Program.