Anthem MRX 740 8K vs Onkyo TX-NR6100

Here we are comparing Anthem MRX 740 8K to Onkyo TX-NR6100 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 7 channel amplifiers.

Anthem MRX 740 8K	Onkyo TX-NR6100
Anthem MRX 740 8K was introduced in 2021. It is equipped with 7 channel amplifier with 140 W (8 Ω, 1 kHz, 2 channel driven) power per channel and is capable of 11.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz video signal.	Onkyo TX-NR6100 was introduced in 2021. It is equipped with 7 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 7.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz and upscales 1080p to 4K video signal.

We evaluated Anthem MRX 740 8K and Onkyo TX-NR6100 and gave them scores of 89 and 90 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Anthem MRX 740 8K over Onkyo TX-NR6100.

	Anthem MRX 740 8K	vs	Onkyo TX-NR6100
Higher Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	vs	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Higher DAC Specs	768 kHz/32 Bit	vs	192 kHz/24 Bit
More Channel Processing	11.1	vs	7.1
IMAX Enhanced		vs
More HDMI Inputs	7	vs	6
More HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	vs	2 (1 Main, 1 Sub/Zone2)
More 8K Inputs	7	vs	3
More Optical Inputs	3	vs	1
More Optical Outputs	1	vs
More Coaxial Inputs/Outputs	2	vs	1
More RCA Line Outputs	1	vs
More RCA Pre-Outs	11.2	vs	0.2
Detachable Power Cord		vs
Zone 2 Outs	HDMI, Pre Out	vs	RCA Line Out (shared with Zone B)
RS-232C Interface		vs
+12V Trigger Output	3	vs	0
Remote (IR) Input/Output	1 / 0	vs	0 / 0
Higher S/N Ratio (Line, IHF-A)	110 dB	vs	106 dB

This section shows those features and specifications which are the reason to choose Onkyo TX-NR6100 over Anthem MRX 740 8K.

	Anthem MRX 740 8K	vs	Onkyo TX-NR6100
THX™ Certification		vs	Select™ (previously known as Select2)
Dolby Atmos Height Virtualization		vs
DSD via HDMI		vs	2-ch/Multi-ch Input
DSD via USB		vs	2-ch Input
Works with Amazon Alexa		vs
Google Assistant		vs
Apple Siri		vs
Works with SONOS		vs
DTS Play-Fi		vs
USB Input	for factory service	vs	2 (front and rear)
Front A/V Inputs		vs	USB
More Powered Zones		vs	2
Pandora		vs
Tidal		vs
Deezer		vs
More Speaker Terminals	7	vs	9
More Large Speaker Terminals	7	vs	9
Bigger Power Supply	485 W	vs	635 W

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Anthem MRX 740 8K	Onkyo TX-NR6100
Dolby Atmos
DTS:X
Auto Speaker Calibration System with Mic.	Anthem Room Correction (ARC Genesis)	AccuEQ with subwoofer EQ and AccuReflex™
HDR10
HDR10+
Dolby Vision
HDMI Version	2.1	2.1
eARC
New HDCP Version	2.3	2.3
Auto Low Latency Mode Pass-through
VRR
QFT
8K Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K/60p (RGB/YCbCr4:4:4)
Wi-Fi
Bluetooth		SBC, AAC, aptX, aptX HD
Chromecast Built-In
Many 8K Inputs	7	3
Phono Input
Ethernet
Analog Tuner		FM/AM
Spotify

WEAKNESSES	Anthem MRX 740 8K	Onkyo TX-NR6100
No Front Wide Channel Support
No Auro 3D with Auro-Matic Upmixer
No Composite Video Inputs
No Digital Radio

Anthem MRX 740 8K	Onkyo TX-NR6100
7 channel Class A/B Amplifier: Anthem MRX 740 8K features 7 channel power amplifier with Class A/B design on Channels 1-5 and Class D design on the rest. It is rated at 140 W (8 Ω, 1 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	7 channel Amplifier: Onkyo TX-NR6100 features 7 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Dynamic Audio Amplification: Onkyo TX-NR6100 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.

THX™ Select™ (previously known as Select2) certification

Onkyo TX-NR6100 is THX™ Select™ (previously known as Select2) certified. This means that it is for medium sized rooms, up to 2,000 cubic feet in size, with a 10-12 foot viewing distance from the screen.

AMPLIFIER	Anthem MRX 740 8K	Onkyo TX-NR6100
Channels	7.2	7.2
Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability

Anthem MRX 740 8K's and Onkyo TX-NR6100's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Anthem MRX 740 8K: 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Onkyo TX-NR6100: 5.2.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Anthem MRX 740 8K: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Onkyo TX-NR6100: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Anthem MRX 740 8K: 5.2, 7.2 with internal amplifier.
Onkyo TX-NR6100: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Anthem MRX 740 8K and Onkyo TX-NR6100 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Onkyo TX-NR6100 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Anthem MRX 740 8K and Onkyo TX-NR6100 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Both models feature DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

IMAX Enhanced

Anthem MRX 740 8K is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Anthem MRX 740 8K	Onkyo TX-NR6100
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Anthem MRX 740 8K comes with 7 HDMI 2.1 inputs with 8K support. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

Onkyo TX-NR6100 comes with 3 HDMI 2.1 inputs with 8K support and 3 inputs with 4K support. It has 2 outputs - 1 Main and 1 Sub/Zone2.

• 8K/60Hz and 4K/120Hz Passthrough on Anthem MRX 740 8K: All inputs pass up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.
  8K/60Hz and 4K/120Hz Passthrough on Onkyo TX-NR6100: 3 out of 6 inputs pass up to 8K/60p (RGB/YCbCr4:4:4) and the rest of the inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling on Onkyo TX-NR6100: It can upscale 1080p to 4K from HDMI sources.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.3 Copy Protection: Both receivers are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• Quick Media Switching (QMS): With HDMI 2.1a, Quick Media Switching for movies and video uses the HDMI VRR mechanism to eliminate the blackout period when an HDMI Source device switches its video mode. As long as the resolution remains the same and only the frame rate changes, QMS will instantly switch between frame rates. QMS eliminates A/V blackouts by using VRR technology to change frame rates, allowing instant changes from 24Hz to 60Hz frame rate, and anywhere in-between. The viewer never sees blank screens and gets a seamless experience (available on Onkyo TX-NR6100 only).
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Anthem MRX 740 8K and Onkyo TX-NR6100 support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Both receivers support Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Anthem MRX 740 8K	Onkyo TX-NR6100
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K/60p (RGB/YCbCr4:4:4)

TERMINALS	Anthem MRX 740 8K	Onkyo TX-NR6100
HDMI Inputs	7	6
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	7	3
USB Input	for factory service	2 (front and rear)
USB DC Out Port
Optical Inputs	3	1
Optical Outputs	1
Coaxial Inputs	2	1
RCA Line Inputs	4	4
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs
Component Video Outputs

GENERAL	Anthem MRX 740 8K	Onkyo TX-NR6100
Brand	Anthem	Onkyo
Model	MRX 740 8K	TX-NR6100
Type	A/V Receiver	A/V Receiver
Country	North America	North America
Release Year	2021	2021

AMPLIFIER	Anthem MRX 740 8K	Onkyo TX-NR6100
Channels	7.2	7.2
Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Class A/B on Channels 1-5 and Class D on the rest
Dynamic Audio Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		Front L/R Channels
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Anthem MRX 740 8K	Onkyo TX-NR6100
Digital Signal Processing (DSP) Engine	Next-Generation DSP Platform	32-bit Digital Signal Processing Engines
DAC Specs	768 kHz/32 Bit	192 kHz/24 Bit
Maximum Channel Processing	11.1	7.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats		FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB		FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network		up to 192 kHz
High Resolution Audio Formats via USB		FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI		2-ch/Multi-ch Input
DSD via USB		2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog normalization
Dialogue Lift
Tone Control		Front L/R
Compressed Music Enhancer		Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Anthem MRX 740 8K	Onkyo TX-NR6100
Auto Speaker Calibration System with Mic.	Anthem Room Correction (ARC Genesis)	AccuEQ with subwoofer EQ and AccuReflex™

VIDEO FEATURES	Anthem MRX 740 8K	Onkyo TX-NR6100
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 8K/60p (RGB/YCbCr4:4:4)
Video Signal Upscaling		1080p to 4K
Analog To HDMI Upconversion
isf Certified Calibration Control

CONNECTIVITY	Anthem MRX 740 8K	Onkyo TX-NR6100
Wi-Fi
Bluetooth		SBC, AAC, aptX, aptX HD
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
DTS Play-Fi
MHL Input
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Anthem Remote App	Onkyo Controller and Music Control apps
InstaPrevue Input Source Prevue

TERMINALS	Anthem MRX 740 8K	Onkyo TX-NR6100
HDMI Inputs	7	6
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	7	3
USB Input	for factory service	2 (front and rear)
USB DC Out Port
Optical Inputs	3	1
Optical Outputs	1
Coaxial Inputs	2	1
RCA Line Inputs	4	4
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs		USB
Speaker A/B
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord

ZONES	Anthem MRX 740 8K	Onkyo TX-NR6100
Number of Zones	2	2
Powered Zones		2
Zone 2 Outs	HDMI, Pre Out	RCA Line Out (shared with Zone B)
Whole House Mode
RS-232C Interface
+12V Trigger Output	3	0
Remote (IR) Input/Output	1 / 0	0 / 0

MISCELLANEOUS	Anthem MRX 740 8K	Onkyo TX-NR6100
IP Control
Display

RADIO	Anthem MRX 740 8K	Onkyo TX-NR6100
Analog Tuner		FM/AM
Presets		40
Digital Radio
Internet Radio		TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Anthem MRX 740 8K	Onkyo TX-NR6100
Speaker Terminals	7	9
Large Speaker Terminals	7	9
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
Gold plated RCA terminals

POWER	Anthem MRX 740 8K	Onkyo TX-NR6100
Power Supply	AC 120 V, 60 Hz	AC 120 V, 60 Hz
H.C.P.S. (High Current Power Supply)		Custom High-Current Low-Noise Power Transformer
Toroidal Transformer
Power Consumption	485 W	635 W
No Sound Power		65 W
Standby Power	0.3 W	0.1 W
ECO Mode / Hybrid Standby Function

PHYSICAL	Anthem MRX 740 8K	Onkyo TX-NR6100
Dimensions (W x H x D)	431.8 mm x 152.4 mm x 364 mm 17" x 6" x 14-1/2" x	435 mm x 173.5 mm x 379.5 mm 17-1/8" x 6-13/16" x 14-15/16"
Dimensions of Package (W x H x D)		534 mm x 265 mm x 468 mm 21" x 10-7/16" x 18-7/16"
Weight	15.1 kg (33.2 lbs)	9.8 kg (21.6 lbs)
Weight of Package		12.5 kg (27.6 lbs)

SPECIFICATIONS	Anthem MRX 740 8K	Onkyo TX-NR6100
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)		100 W (0.08% THD)
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)	140 W (1% THD) on Channels 1-5, 60 W (1% THD) on Remaining Channels
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	170 W (1% THD) on Channels 1-5, 75 W (1% THD) on Remaining Channels
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)		210 W (10% THD)
Dynamic Power per Channel (3 Ω, Front)		240 W
Dynamic Power per Channel (4 Ω, Front)		210 W
Dynamic Power per Channel (8 Ω, Front)		120 W
THD		0.08% (20 Hz - 20 kHz, Half power)
Input Sensitivity and Impedance (Line)		200 mV/47 kΩ (1 kHz, 100 W/8 Ω)
Input Sensitivity and Impedance (Phono MM)		3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/470 Ω (subwoofer)
Maximum Preout Level and Impedance	5.2 VRMS, 7.1 VRMS
Rated Headphone Jack Output Level and Impedance	32 Ω - 600 Ω
Rated Headphone Power Output		80 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	110 dB	106 dB
S/N Ratio (Phono MM, IHF-A)		80 dB
Frequency Response (Analog In)	20 Hz - 30 kHz +/-0.2 dB	10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
DSD Sampling Rates via HDMI		2.8 MHz
DSD Sampling Rates via USB		2.8 MHz, 5.6 MHz, 11.2 MHz
Ethernet Standard		10BASE-T/100BASE-TX
Wi-Fi Standard		IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency		5 GHz, 2.4 GHz
Bluetooth Version		4․2
Bluetooth Frequency		2.4 GHz
USB Terminal		Front: Ver. 2.0, 5 V, 0.5 A Rear: Ver. 2.0, 5 V, 1 A
FM Frequency		87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 1.0 µV (11.2 dBf)
AM Frequency		530 kHz - 1710 kHz
Warranty		2 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted