Anthem MRX 740 8K vs Integra DRX-4.3

Here we are comparing Anthem MRX 740 8K to Integra DRX-4.3 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Anthem MRX 740 8K has 7 channel and the Integra DRX-4.3 has 9 channel amplifiers.

Anthem MRX 740 8K	Integra DRX-4.3
Anthem MRX 740 8K was introduced in 2021. It is equipped with 7 channel amplifier with 140 W (8 Ω, 1 kHz, 2 channel driven) power per channel and is capable of 11.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 8K/60Hz and 4K/120Hz video signal.	Integra DRX-4.3 was introduced in 2019. It is equipped with 9 channel amplifier with 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Anthem MRX 740 8K and Integra DRX-4.3 and gave them scores of 89 and 91 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Anthem MRX 740 8K over Integra DRX-4.3.

	Anthem MRX 740 8K	vs	Integra DRX-4.3
Higher Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	vs	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Higher DAC Specs	768 kHz/32 Bit	vs	384 kHz/32 Bit
DTS Virtual:X		vs
HDR10+		vs
Enhanced Audio Return Channel (eARC)		vs
Auto Low Latency Mode Pass-through		vs
VRR		vs
QFT		vs
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	vs	up to 4K 50/60Hz 4:4:4
More HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	vs	2 (1 Main, 1 Sub/Zone2)
More 8K Inputs	7	vs
More Optical Inputs	3	vs	1
More Optical Outputs	1	vs
More Coaxial Inputs/Outputs	2	vs	1
More RCA Line Outputs	1	vs
Zone 2 Outs	HDMI, Pre Out	vs	HDMI, RCA Pre/Line Out (shared with Zone B Line Out)
Higher S/N Ratio (Line, IHF-A)	110 dB	vs	106 dB

This section shows those features and specifications which are the reason to choose Integra DRX-4.3 over Anthem MRX 740 8K.

	Anthem MRX 740 8K	vs	Integra DRX-4.3
More Channels	7.2	vs	9.2
THX™ Certification		vs	Select™ (previously known as Select2)
Dolby Atmos Height Virtualization		vs
DSD via HDMI		vs	2-ch/Multi-ch Input
DSD via USB		vs	2-ch Input
Google Assistant		vs
Apple Siri		vs
Works with SONOS		vs
DTS Play-Fi		vs
USB Input	for factory service	vs	1 (Rear)
More RCA Line Inputs	4	vs	7 (1 front)
More Composite Video Inputs		vs	3 (1 front)
More Component Video Inputs		vs	1
Front A/V Inputs		vs	HDMI, Composite, L/R Audio
More Zones	2	vs	3
More Powered Zones		vs	2 and 3
Remote (IR) Input/Output	1 / 0	vs	2 / 1
Pandora		vs
Tidal		vs
Deezer		vs
More Speaker Terminals	7	vs	11
More Large Speaker Terminals	7	vs	11
Bigger Power Supply	485 W	vs	750 W

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Anthem MRX 740 8K	Integra DRX-4.3
Channel Processing	11.1	11.2
Dolby Atmos
DTS:X
IMAX Enhanced
Auto Speaker Calibration System with Mic.	Anthem Room Correction (ARC Genesis)	AccuEQ Advance 9-point calibration with subwoofer EQ and AccuReflex™
HDR10
Dolby Vision
New HDCP Version	2.3	2.3
Wi-Fi
Bluetooth		SBC, AAC
Chromecast Built-In
Many HDMI Inputs	7	7 (1 front)
Phono Input
RCA Pre-Outs	11.2	11.2 (shared with Zone 2 Line/Pre Out)
Ethernet
Analog Tuner		FM/AM
Spotify

WEAKNESSES	Anthem MRX 740 8K	Integra DRX-4.3
No Front Wide Channel Support
No Auro 3D with Auro-Matic Upmixer
Does not Work with Amazon Alexa
No Digital Radio

Anthem MRX 740 8K	Integra DRX-4.3
7 channel Class A/B Amplifier: Anthem MRX 740 8K features 7 channel power amplifier with Class A/B design on Channels 1-5 and Class D design on the rest. It is rated at 140 W (8 Ω, 1 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	9 channel Amplifier: Integra DRX-4.3 features 9 channel power amplifier. It is rated at 100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

THX™ Select™ (previously known as Select2) certification

Integra DRX-4.3 is THX™ Select™ (previously known as Select2) certified. This means that it is ideally suited for a room where the screen-to-seat viewing distance is approximately 3 to 4 meters, and the room size is approximately 56 cubic meters.

AMPLIFIER	Anthem MRX 740 8K	Integra DRX-4.3
Channels	7.2	9.2
Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability		Front L/R Channels

Anthem MRX 740 8K's and Integra DRX-4.3's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Anthem MRX 740 8K: 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Integra DRX-4.3: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Anthem MRX 740 8K: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
Integra DRX-4.3: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Anthem MRX 740 8K: 5.2, 7.2 with internal amplifier.
Integra DRX-4.3: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Anthem MRX 740 8K and Integra DRX-4.3 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Integra DRX-4.3 supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Anthem MRX 740 8K and Integra DRX-4.3 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Anthem MRX 740 8K supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

IMAX Enhanced

Anthem MRX 740 8K and Integra DRX-4.3 are IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Anthem MRX 740 8K	Integra DRX-4.3
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Anthem MRX 740 8K comes with 7 HDMI 2.1 inputs with 8K support. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

Integra DRX-4.3 comes with 7 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.

• 8K/60Hz and 4K/120Hz Passthrough on Anthem MRX 740 8K: All inputs pass up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.
  4K/60Hz Passthrough on Integra DRX-4.3: All inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling on Integra DRX-4.3: It can upscale 1080p to 4K from HDMI and analog sources.
• Analog To HDMI Upconversion: Integra DRX-4.3 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.3 Copy Protection: Both receivers are HDCP 2.3 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Anthem MRX 740 8K supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma.

Integra DRX-4.3 supports HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Anthem MRX 740 8K supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Gaming Features

Anthem MRX 740 8K supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.

VIDEO FEATURES	Anthem MRX 740 8K	Integra DRX-4.3
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 4K 50/60Hz 4:4:4

TERMINALS	Anthem MRX 740 8K	Integra DRX-4.3
HDMI Inputs	7	7 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	7
USB Input	for factory service	1 (Rear)
USB DC Out Port
Optical Inputs	3	1
Optical Outputs	1
Coaxial Inputs	2	1
RCA Line Inputs	4	7 (1 front)
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	11.2 (shared with Zone 2 Line/Pre Out)
XLR Pre-outs
Composite Video Inputs		3 (1 front)
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs		1
Component Video Outputs

GENERAL	Anthem MRX 740 8K	Integra DRX-4.3
Brand	Anthem	Integra
Model	MRX 740 8K	DRX-4.3
Type	A/V Receiver	A/V Receiver
Country	North America	North America
Release Year	2021	2019
Predecessor		Integra DRX-4.2

AMPLIFIER	Anthem MRX 740 8K	Integra DRX-4.3
Channels	7.2	9.2
Power Output	140 W (8 Ω, 1 kHz, 2 channel driven)	100 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design	Class A/B on Channels 1-5 and Class D on the rest
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)		Front L/R
THX™ Certification		Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry		2-Stage
PUSH-PULL Design
Bi-amp Capability		Front L/R Channels

AUDIO FEATURES	Anthem MRX 740 8K	Integra DRX-4.3
Digital Signal Processing (DSP) Engine	Next-Generation DSP Platform	32-Bit DSP Chip for Advanced Processing
DAC		AKM AK4458
DAC Specs	768 kHz/32 Bit	384 kHz/32 Bit
Maximum Channel Processing	11.1	11.2
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats		FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC
Music Playback via USB		FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC
High Resolution Music Playback via USB and/or Network		up to 192 kHz
High Resolution Audio Formats via USB		FLAC, WAV, Apple Lossless, DSD, AIFF, AAC
Gapless Playback
DSD via HDMI		2-ch/Multi-ch Input
DSD via USB		2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
DTS Dialogue Control
Dialog Enhancement
Dialog normalization
Dialogue Lift
Tone Control		All Channels
Compressed Music Enhancer		Advanced Music Optimizer
High-resolution Music Enhancer
THX Processing Mode
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Audio Mode
Virtual Speakers		T-D (Theater-Dimensional)
Independent Subwoofer Outputs

CALIBRATION	Anthem MRX 740 8K	Integra DRX-4.3
Auto Speaker Calibration System with Mic.	Anthem Room Correction (ARC Genesis)	AccuEQ Advance 9-point calibration with subwoofer EQ and AccuReflex™
Standing Wave Control		Standing Wave EQ
Distance Adjustment		0.1 - foot

VIDEO FEATURES	Anthem MRX 740 8K	Integra DRX-4.3
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDMI Version	2.1
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.3	2.3
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 8K 50/60Hz and 4K 100/120Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling		1080p to 4K
Analog To HDMI Upconversion		Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution		480i/576i
isf Certified Calibration Control

CONNECTIVITY	Anthem MRX 740 8K	Integra DRX-4.3
Wi-Fi
Bluetooth		SBC, AAC
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS
DTS Play-Fi
Remote Monitoring with ihiji
AirPlay	AirPlay 2	Airplay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Anthem Remote App	Integra Control Pro
InstaPrevue Input Source Prevue

TERMINALS	Anthem MRX 740 8K	Integra DRX-4.3
HDMI Inputs	7	7 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	2 (1 Main, 1 Sub/Zone2)
8K Inputs	7
USB Input	for factory service	1 (Rear)
USB DC Out Port
Optical Inputs	3	1
Optical Outputs	1
Coaxial Inputs	2	1
RCA Line Inputs	4	7 (1 front)
RCA Line Outputs	1
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	11.2 (shared with Zone 2 Line/Pre Out)
XLR Pre-outs
Composite Video Inputs		3 (1 front)
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs		1
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs		HDMI, Composite, L/R Audio
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord		Oversized AC Cord

ZONES	Anthem MRX 740 8K	Integra DRX-4.3
Number of Zones	2	3
Powered Zones		2 and 3
Zone 2 Outs	HDMI, Pre Out	HDMI, RCA Pre/Line Out (shared with Zone B Line Out)
Zone 3 Outs		RCA Pre/Line Out (shared with Zone B Line Out)
Whole House Mode
RS-232C Interface
+12V Trigger Output	3	3 (A:100 mA, B:25 mA, C:25 mA)
Remote (IR) Input/Output	1 / 0	2 / 1

MISCELLANEOUS	Anthem MRX 740 8K	Integra DRX-4.3
On-Screen Display
GUI Languages		9
IP Control
Control4 SDDP
Display
RIHD (Remote Interactive Over HDMI)
Smart Grid-Ready

RADIO	Anthem MRX 740 8K	Integra DRX-4.3
Analog Tuner		FM/AM
Presets		40
Digital Radio
Internet Radio		TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Anthem MRX 740 8K	Integra DRX-4.3
Front Panel		Anti-Resonant Aluminum Front Panel
Solid Aluminum Front
Speaker Terminals	7	11
Large Speaker Terminals	7	11
Color-Coded Speaker Terminals
Gold plated RCA terminals
Rack Mount Kit Available		IRK-155-3D

POWER	Anthem MRX 740 8K	Integra DRX-4.3
Power Supply	AC 120 V, 60 Hz	AC 120 V, 60 Hz
Independent Power Supply		2
H.C.P.S. (High Current Power Supply)		Massive High Power Transformer
Toroidal Transformer
Power Consumption	485 W	750 W
Standby Power	0.3 W	0.15 W
ECO Mode / Hybrid Standby Function

PHYSICAL	Anthem MRX 740 8K	Integra DRX-4.3
Dimensions (W x H x D)	431.8 mm x 152.4 mm x 364 mm 17" x 6" x 14-1/2" x	435 mm x 174 mm x 376.5 mm 17-1/8" x 6-7/8" x 14-13/16"
Dimensions of Package (W x H x D)		560 mm x 305 mm x 467 mm 22-1/16" x 12" x 18-3/8"
Weight	15.1 kg (33.2 lbs)	11.2 kg (24.7 lbs)
Weight of Package		14.0 kg (30.9 lbs)

SPECIFICATIONS	Anthem MRX 740 8K	Integra DRX-4.3
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)		100 W (0.08% THD)
Power Output (8 Ω, 1 kHz, 2 channel Driven, FTC)	140 W (1% THD) on Channels 1-5, 60 W (1% THD) on Remaining Channels
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	170 W (1% THD) on Channels 1-5, 75 W (1% THD) on Remaining Channels
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)		225 W (10% THD)
Dynamic Power per Channel (3 Ω, Front)		250 W
Dynamic Power per Channel (4 Ω, Front)		220 W
Dynamic Power per Channel (8 Ω, Front)		130 W
THD		0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance (Line)		200 mV/47 kΩ (Line)
Input Sensitivity and Impedance (Phono MM)		3.5 mV/47 kΩ
Rated Preout Level and Impedance		1 V/470 Ω
Maximum Preout Level and Impedance	5.2 VRMS, 7.1 VRMS
Rated Headphone Jack Output Level and Impedance	32 Ω - 600 Ω	8 Ω - 600 Ω
Rated Headphone Power Output		85 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload		70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	110 dB	106 dB
S/N Ratio (Phono MM, IHF-A)		80 dB
Frequency Response (Analog In)	20 Hz - 30 kHz +/-0.2 dB	10 Hz - 100 kHz/+1 dB, -3 dB (Direct)
DSD Sampling Rates via HDMI		2.8 MHz
DSD Sampling Rates via USB		2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance		1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Ethernet Standard		10BASE-T/100BASE-TX
Wi-Fi Standard		IEEE 802.11 a/b/g/n/ac
Wi-Fi Terminal Frequency		5 GHz, 2.4 GHz
Bluetooth Version		4․2
Bluetooth Frequency		2.4 GHz
USB Terminal		Ver. 2.0, 5 V, 1 A
FM Frequency		87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 1.0 µV (11.2 dBf)
AM Frequency		530 kHz - 1710 kHz
Warranty		3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted