Anthem MRX 740 8K
- 7.2 channels
- 11.1 channel processing
- 140 W (8 Ω, 1 kHz, 2 channel driven)
- HDMI 2.1
- Dolby Atmos, DTS:X capable
- HDR10, HDR10+, Dolby Vision, 8K Passthrough
- AirPlay 2, Chromecast
- Ethernet, Wi-Fi, Bluetooth
- USB and Phono inputs
- 9.2 channels
- 9.1 channel processing
- 90 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
- Dolby Atmos, DTS:X capable
- HDR10, Dolby Vision, 4K Passthrough
- Airplay, Chromecast, DTS Play-Fi
- Ethernet, Wi-Fi, Bluetooth
- USB and Phono inputs
Disclosure: We earn money from the affiliate links to products associated with content in this article.
Here we are comparing Anthem MRX 740 8K to Integra DRX-3.2 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Anthem MRX 740 8K has 7 channel and the Integra DRX-3.2 has 9 channel amplifiers.
Advantage of Anthem MRX 740 8K
This section shows those features and specifications which are the reason to choose Anthem MRX 740 8K over Integra DRX-3.2.
Anthem MRX 740 8K has higher DAC specs, more channel processing and higher signal to noise ratio. It supports IMAX Enhanced. It has analog pre-outs and XLR inputs. In video department only Anthem MRX 740 8K supports HDCP 2.3 copy protection.
|Anthem MRX 740 8K||vs||Integra DRX-3.2|
|Higher DAC Specs||768 kHz/32 Bit||vs||384 kHz/32 Bit|
|More Channel Processing||11.1||vs||9.1|
|Enhanced Audio Return Channel (eARC)||vs|
|Newer HDCP Version||2.3||vs||2.2|
|Auto Low Latency Mode Pass-through||vs|
|Video Signal Passthrough||up to 8K 50/60Hz and 4K 100/120Hz 4:4:4||vs||up to 4K 50/60Hz 4:4:4|
|More HDMI Outputs||3 (2 for MAIN, 1 for ZONE2)||vs||2 (1 Main, 1 Sub/Zone2)|
|More 8K Inputs||7||vs|
|More RCA Line Outputs||1||vs|
|XLR Line Inputs||vs|
|More Optical Outputs||1||vs|
|More Coaxial Inputs/Outputs||2||vs||1|
|More RCA Pre-Outs||11.2||vs||0.2|
|Zone 2 Outs||HDMI, Pre Out||vs||HDMI, RCA Pre/Line Out|
|Higher S/N Ratio (Line, IHF-A)||110 dB||vs||106 dB|
Advantage of Integra DRX-3.2
This section shows those features and specifications which are the reason to choose Integra DRX-3.2 over Anthem MRX 740 8K.
Integra DRX-3.2 has more channels and bigger power supply. It supports DSD streaming via HDMI and USB, SONOS, Pandora, Tidal and Deezer.
|Anthem MRX 740 8K||vs||Integra DRX-3.2|
|DSD via HDMI||vs||2-ch/Multi-ch Input|
|DSD via USB||vs||2-ch Input|
|Works with SONOS||vs|
|USB Input||for factory service||vs||1 (Rear)|
|More RCA Line Inputs||4||vs||7 (1 front)|
|More Composite Video Inputs||vs||3 (1 front)|
|More Component Video Inputs||vs||2|
|Front A/V Inputs||vs||HDMI, Composite, L/R Audio|
|More Powered Zones||vs||2|
|Remote (IR) Input/Output||1 / 0||vs||2 / 1|
|More Speaker Terminals||7||vs||9|
|More Large Speaker Terminals||7||vs||9|
|Bigger Power Supply||485 W||vs||740 W|
Common Strengths and Weaknesses
Here we list common strengths and weaknesses of both receivers.
|11 and 9 Channel Processing|
|Auto Speaker Calibration System with Mic.|
|New HDCP Version|
|4K or 8K Video Passthrough|
|Many HDMI Inputs|
|Many Optical Inputs|
|No Front Wide Channel Support|
|No Dolby Atmos Height Virtualization|
|No Auro 3D with Auro-Matic Upmixer|
|Does not Work with Amazon Alexa|
|Anthem MRX 740 8K||Integra DRX-3.2|
7 channel Class A/B Amplifier: Anthem MRX 740 8K features 7 channel power amplifier with Class A/B design on Channels 1-5 and Class D design on the rest. It is rated at 140 W (8 Ω, 1 kHz, 2 channel driven) and is able to drive 4 ohm speakers.
9 channel Amplifier: Integra DRX-3.2 features 9 channel power amplifier. It is rated at 90 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.
Anthem MRX 740 8K's and Integra DRX-3.2's amplifiers can be assigned for different speaker configurations.
- Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
- Anthem MRX 740 8K: 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
- Integra DRX-3.2: 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
- DTS:X Configurations: The following speaker configurations are supported for DTS:X:
- Anthem MRX 740 8K: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2 with internal amplifier and 5.2.4, 7.2.2 with addition of external 2 channel amplifier and 7.2.4 with addition of external 4 channel amplifier.
- Integra DRX-3.2: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier.
- Configurations without height channels: There are also other speaker configurations available which do not include height channels:
- Anthem MRX 740 8K: 5.2, 7.2 with internal amplifier.
- Integra DRX-3.2: 5.2, 7.2 with internal amplifier.
- 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.
- Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
- DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
- DTS Virtual:X: Anthem MRX 740 8K supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
- DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.
- Compressed Music Enhancer: Integra DRX-3.2 features Compressed Music Enhancer which enhances the quality of the music files with lossy compression.
- Advanced Music Optimizer: Compressed music enhancement in Integra DRX-3.2 is done by Onkyo’s Advanced Music Optimizer. While MP3 or AAC files may sound fine through the headphones of your portable digital player, the limitations of these files can be exposed when played back through a quality home entertainment system. This is because a significant amount of high-frequency bit information is lost during the file-compression process. To counter this, Onkyo has designed the Advanced Music Optimizer to compensate for lost bit information and improve the quality of compressed audio signals. This results in a clearer and more expansive sound. Also included in this technology is a loudness correction feature that further improves the audio character of compressed files.
- AccuEQ: First, AccuEQ detects the presence of speakers and evaluates the impedance of each. Next, it pinpoints their distance relative to the main listening position using the mic and sets suitable sound-pressure levels. Then it selects the optimal crossover frequency so that deeper bass rolls smoothly off to the subwoofer. Finally, AccuEQ performs frequency response equalization based on room-acoustic and speaker data collected via microphone. The sound-field is now tailored around the listening position, resulting in a more immersive and realistic in-film experience.
Anthem MRX 740 8K and Integra DRX-3.2 support Dolby Atmos. It is a cinematic audio format in which sounds exist as individual entities, called audio objects. In Dolby Atmos, any sound can exist as an independent audio object, free of channel restrictions. They can be precisely placed and moved anywhere in your room, including overhead, to flow above and around you in three-dimensional space. Through the use of audio objects, overhead sound, and all the richness, clarity, and power of Dolby sound, Dolby Atmos turns your room into an amazing place for entertainment. The format supports up to 128 simultaneous independent audio objects in a mix for rich, realistic, and breathtaking sound. It recreates the director's original concept through descriptive metadata to provide customized playback for home theater and delivers sounds above you through overhead speakers, special upward-firing Dolby Atmos speakers, or a Dolby Atmos enabled sound bar.
Anthem MRX 740 8K and Integra DRX-3.2 support DTS:X. A technique used in DTS:X is similar to the one used in Dolby Atmos. Instead of a fixed number of channels, DTS:X defines object locations from the listener in polar coordinates. An a/v receiver then dynamically renders sound according to the current speaker configuration. The speaker layout employed by DTS:X is the sum of Dolby Atmos and Auro-3D. It has standard 7.1 channel base layer, a 5 channel height layer above the base layer on the front and side walls, and 3 rows of speakers on the ceiling.
Enhanced Audio Return Channel (eARC)
Anthem MRX 740 8K supports Audio Return Channel (ARC) feature allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.
Anthem MRX 740 8K comes with Anthem Room Correction (ARC Genesis) and Integra DRX-3.2 comes with AccuEQ Advance with AccuReflex™ room correction system.
Anthem MRX 740 8K comes with 7 HDMI 2.1 inputs with 8K support. It has 3 outputs - 2 for MAIN and 1 for ZONE2.
Integra DRX-3.2 comes with 7 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.
- 8K/60Hz and 4K/120Hz Passthrough on Anthem MRX 740 8K: All inputs pass up to 8K 50/60Hz and 4K 100/120Hz 4:4:4 video signal.
4K/60Hz Passthrough on Integra DRX-3.2: All inputs pass up to 4K 50/60Hz 4:4:4 video signal.
- Analog To HDMI Upconversion: Integra DRX-3.2 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
- BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
- HDCP Copy Protection: Anthem MRX 740 8K is HDCP 2.3 and Integra DRX-3.2 is HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
- 3D Ready: Both receivers are able to pass 3D video through HDMI.
HDR (High Dynamic Range)
Anthem MRX 740 8K supports HDR10, HDR10+, Dolby Vision and Hybrid Log-Gamma.
Integra DRX-3.2 supports HDR10, Dolby Vision and Hybrid Log-Gamma.
High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.
- HDR10: HDR10 uses the wide-gamut Rec. 2020 color space. It sends static metadata via video stream to the TV which calibrates its screen brightness and color according to that. HDR10 supports 10-bit color which corresponds to 1024 shades of the primary RGB colors. It is technically limited to a maximum of 10,000 nits peak brightness, however common HDR10 contents are mastered with peak brightness from 1,000 to 4,000 nits.
- HDR10+: HDR10+ is an HDR video technology that adds dynamic metadata to HDR10 source files. The dynamic metadata are used to adjust brightness levels on a scene-by-scene or even frame-by-frame basis. HDR10+ supports maximum of 10,000 nits peak brightness and 10-bit or more (up to 16-bit) color bit depth. It uses Samsung's dynamic metadata defined in SMPTE ST 2094-40.
- Dolby Vision: Dolby Vision is a set of technologies developed by Dolby Laboratories for high dynamic range (HDR) video. It covers content creation, distribution, and playback. Like HDR10+, it includes dynamic metadata that are used to adjust and optimize each frame of the HDR video to the consumer display's capabilities in a way specified by the content creator. Dolby Vision allows for a maximum resolution of 8K up to 12-bit color depth, maximum peak brightness of 10,000 nits and a color gamut up to Rec. 2020. It uses Dolby's proprietary dynamic metadata defined in SMPTE ST 2094-10.
- Hybrid Log-Gamma (HLG): The Hybrid Log-Gamma (HLG) is a transfer function developed mainly for HDR live video feed and over-the-air broadcasts. It is an HDR format that uses BT.2020 color primaries and a bitdepth of 10-bit. It is backward compatible with the transfer function of SDR and is designed to be better-suited for television broadcasting, where the metadata required for other HDR formats is not backward compatible with non-HDR displays. HLG defines a non-linear optical-electro transfer function, in which the lower half of the signal values use a gamma curve and the upper half of the signal values use a logarithmic curve.
Anthem MRX 740 8K is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.
- What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.
- IMAX Enhanced Content: IMAX Enhanced studio partners have announced IMAX Enhanced versions of movies that exclusively feature IMAX's signature picture, sound and scale.
- Picture: Stunning, ultra-vivid 4K HDR picture that utilizes the newest, proprietary Digital Media Remastering technology (DMR) developed by IMAX. DMR accurately reduces noise and grain under the filmmaker’s guidance to best optimize the content for a much higher-quality, higher-brightness display. Without this technology, high-dynamic range content can actually look worse than what was originally seen and intended by the filmmaker.
- Sound: IMAX and DTS have partnered with award-winning Hollywood sound mixers leveraging DTS:X codec technology integrated in home audio equipment and select televisions to deliver an IMAX signature sound experience with deeper bass and more dynamic range.
- Scale: Select IMAX Enhanced titles that were shot with IMAX-certified cameras or specially formatted for IMAX theatres feature its exclusive expanded aspect ratio, enabling viewers to see the full scale and scope of the picture on 4K HDR TVs.
- Streaming Services: IMAX Enhanced is now available on the world’s biggest streaming services, including Disney+, BRAVIA CORE, Tencent, iQiyi and more.
Anthem MRX 740 8K supports Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR) and Quick Frame Transport (QFT) for lag-free and smooth gaming.
- Auto Low Latency Mode (ALLM): Auto Low Latency Mode enables the ideal latency setting to automatically be set allowing for smooth, lag-free and uninterrupted viewing and interactivity. When the receiver detects a gaming signal it will enter ALLM. The signal will also be sent to the TV causing it to automatically switch to a low-latency, low-lag mode for gaming. Some functions will not be available on the receiver and TV during ALLM.
- Variable Refresh Rate (VRR): VRR enables a gaming source such as a console or computer to deliver video frames as fast as it can, which in many cases is slower than the normal static refresh rate. It allows the TV to adapt to certain frame rate which reduces or eliminates lag, judder and frame tearing for more fluid and better detailed gameplay.
- Quick Frame Transport (QFT): QFT reduces latency for smoother no-lag gaming, and real-time interactive virtual reality. It transports each frame at a higher rate to decrease display latency, which is the amount of time between a frame being ready for transport in the GPU and that frame being completely displayed.
Inputs and Outputs
- Analog Pre-Outs: Anthem MRX 740 8K has 11.2 preamplifier outputs which allows you to connect the receiver to the external power amplifier. You may want to use a high quality external amplifier for certain channels, usually for front L/R and center, and use the receiver to power the rest. Also, Anthem MRX 740 8K has 11 channel processing but has only 7 channel amplifier, so it needs external amplifier connected to the analog pre-outs in order to reach its maximum speaker configuration.
- XLR Inputs: There is one pair of XLR inputs on Anthem MRX 740 8K. If your CD player, Blu-Ray player or other source have XLR outputs you can connect them to the receiver's XLR Inputs for higher quality balanced connection.
- Analog Line Inputs and Outputs: There are 4 pair of line inputs on Anthem MRX 740 8K and 7 pair of line inputs on Integra DRX-3.2 for connecting sources with analog outputs. There is also 1 pair of line outputs on Anthem MRX 740 8K.
- Digital Inputs and Outputs: 1 optical input, 3 optical outputs and 2 coaxial inputs are available on Anthem MRX 740 8K and 1 optical input, 2 optical outputs and 1 coaxial input are available on Integra DRX-3.2 for digital audio connections.
- Headphone Output: There is a 6.3 mm (1/4") headphone output jack on the front panel of each receiver.
- Anthem MRX 740 8K
Inputs: 7 Outputs: 3 (2 for MAIN, 1 for ZONE2)
8K Inputs: 7.
- Integra DRX-3.2
Inputs: 7 (1 front) Outputs: 2 (1 Main, 1 Sub/Zone2)
8K Inputs: 0.
- Composite Video: Connect you VCR, Laserdisc player and other old video equipment with composite video cables.
- Anthem MRX 740 8K
Inputs: 0 Outputs: 0.
- Integra DRX-3.2
Inputs: 3 Outputs: 0.
- Component Video: Component video connection gives you the higher quality video compared to the composite video connection. So in case your old DVD player and other equipment do not have an HDMI output but have Component video output use this connection over the composite one. resolution on Component video connectors.
- Integra DRX-3.2 supports up to 480i/576i resolution on Component video connectors.
- Anthem MRX 740 8K
Inputs: 0 Outputs: 0.
- Integra DRX-3.2
Inputs: 2 Outputs: 0.
Front A/V Inputs
- Anthem MRX 740 8K: None
- Integra DRX-3.2: HDMI, Composite, L/R Audio
Anthem MRX 740 8K
And in the end let us list all the available specifications of the receivers side-by-side.
|BASICS||Anthem MRX 740 8K||Integra DRX-3.2|
|Model||MRX 740 8K||DRX-3.2|
|Type||A/V Receiver||A/V Receiver|
|Country||North America||North America|
|AMPLIFIER||Anthem MRX 740 8K||Integra DRX-3.2|
|Front Wide Channel Support|
|Amplifier||Class A/B on Channels 1-5 and Class D on the rest|
|Non-Phase Shift Amplifier|
|VLSC (Vector Linear Shaping Circuitry)||Front L/R|
|Continuous 6 Ω Rated|
|Certified 4 Ω Performance|
|Discrete Output Stage Circuitry||2-Stage|
|Bi-amp Capability||Front L/R Channels|
|AUDIO||Anthem MRX 740 8K||Integra DRX-3.2|
|Digital Signal Processing (DSP) Engine||Next-Generation DSP Platform||32-Bit DSP Chip for Advanced Processing|
|DAC Specs||768 kHz/32 Bit||384 kHz/32 Bit|
|Maximum Channel Processing||11.1||9.1|
|Air Studios Monitor Certification|
|Dolby Atmos Height Virtualization|
|Dolby Atmos Music|
|Dolby Digital Plus|
|Dolby Surround Upmixer|
|Dolby Pro Logic|
|Dolby Digital EX|
|THX Listening Modes|
|DTS-HD Master Audio|
|DTS-HD High Resolution Audio|
|Auro 3D with Auro-Matic Upmixer|
|PCM||2-ch/Multi-ch Input||2-ch/Multi-ch Input|
|Music Playback via USB||FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD|
|High Resolution Music Playback via USB and/or Network||up to 192 kHz|
|High Resolution Audio Formats via USB||FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD|
|DSD via HDMI||2-ch/Multi-ch Input|
|DSD via USB||2-ch Input|
|DSD to PCM Converter|
|Jitter Reduction||PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio|
|DTS Dialog Control|
|Tone Control||All Channels|
|Compressed Music Enhancer||Advanced Music Optimizer|
|High-resolution Music Enhancer|
|THX Processing Mode|
|Audyssey Dynamic EQ|
|Audyssey Dynamic Volume|
|Audyssey Sub EQ HT|
|Pure Audio Mode|
|Virtual Speakers||T-D (Theater-Dimensional)|
|Independent Subwoofer Outputs|
|CALIBRATION||Anthem MRX 740 8K||Integra DRX-3.2|
|Auto Speaker Calibration System with Mic.||Anthem Room Correction (ARC Genesis)||AccuEQ Advance with AccuReflex™|
|Standing Wave Control||Standing Wave EQ|
|Distance Adjustment||0.1 - foot|
|VIDEO||Anthem MRX 740 8K||Integra DRX-3.2|
|HLG (Hybrid Log Gamma)|
|BT.2020 color space|
|QMS (Quick Media Switching)|
|ALLM (Auto Low Latency Mode)|
|VRR (Variable Refresh Rate)|
|QFT (Quick Frame transport)|
|Video Signal Passthrough||up to 8K 50/60Hz and 4K 100/120Hz 4:4:4||up to 4K 50/60Hz 4:4:4|
|Analog To HDMI Upconversion||Component**, Composite|
|Component Video Upscaling|
|Analog to Analog Video conversion|
|Component Video Maximum Resolution||480i/576i|
|isf Certified Calibration Control|
|CONNECTIVITY||Anthem MRX 740 8K||Integra DRX-3.2|
|Remote Monitoring with ihiji|
|Works with Amazon Alexa|
|Works with SONOS|
|Apple Product Connection||iPod, iPhone and iPad||iPod, iPhone and iPad|
|Remote App||Anthem Remote App||Integra Control Pro|
|InstaPrevue Input Source Prevue|
|HDMI Inputs||7||7 (1 front)|
|HDMI Outputs||3 (2 for MAIN, 1 for ZONE2)||2 (1 Main, 1 Sub/Zone2)|
|USB Input||for factory service||1 (Rear)|
|USB DC Out Port|
|RCA Line Input||4||7 (1 front)|
|RCA Line Output||1|
|XLR Line Inputs|
|Composite Video Input||3 (1 front)|
|Composite Video Output|
|Component Video Input||2|
|Component Video Output|
|Front A/V Inputs||HDMI, Composite, L/R Audio|
|Headphone Out||6.3 mm (1/4")||6.3 mm (1/4")|
|ZONES||Anthem MRX 740 8K||Integra DRX-3.2|
|Zone 2 Outs||HDMI, Pre Out||HDMI, RCA Pre/Line Out|
|Whole House Mode|
|+12V Trigger Output||3||3 (A:100 mA, B:25 mA, C:25 mA)|
|Remote (IR) Input/Output||1 / 0||2 / 1|
|MISC||Anthem MRX 740 8K||Integra DRX-3.2|
|IP Control for CI|
|Detachable Power Cord||Oversized AC Cord|
|RIHD (Remote Interactive Over HDMI)|
|RADIO||Anthem MRX 740 8K||Integra DRX-3.2|
|SiriusXM Internet Radio|
|CONSTRUCTION||Anthem MRX 740 8K||Integra DRX-3.2|
|Front Panel||Anti-Resonant Aluminum Front Panel|
|Solid Aluminum Front|
|Large Speaker Terminals||7||9|
|Color-Coded Speaker Terminals|
|Gold plated RCA terminals|
|POWER||Anthem MRX 740 8K||Integra DRX-3.2|
|Power Supply||AC 120 V, 60 Hz||AC 120 V, 60 Hz|
|Independent Power Supply||2|
|H.C.P.S. (High Current Power Supply)||Massive High Power Transformer|
|Power Consumption||485 W||740 W|
|Standby Power||0.3 W||0.15 W|
|GENERAL||Anthem MRX 740 8K||Integra DRX-3.2|
|ECO Mode / Hybrid Standby Function|
|Dimensions (W x H x D)||431.8 mm x 152.4 mm x 364 mm|
17" x 6" x 14-1/2" x
|435 mm x 174 mm x 376.5 mm|
17-1/8" x 6-7/8" x 14-13/16"
|Dimensions of Package (W x H x D)||570 mm x 298 mm x 469 mm|
22-7/16" x 11-3/4" x 18-7/16"
|Weight||15.1 kg (33.2 lbs)||10.6 kg (23.4 lbs)|
|Weight of Package||13.5 kg (29.8 lbs)|
|Rack Mount Kit Available||IRK-155-3D|
|SPECS||Anthem MRX 740 8K||Integra DRX-3.2|
|Power Output (8 Ω, 20 Hz - 20 kHz, 2||90 W (0.08% THD)|
|Power Output (8 Ω, 1 kHz, 2||140 W (1% THD) on Channels 1-5, 60 W (1% THD) on Remaining Channels|
|Power Output (6 Ω, 1 kHz, 2||170 W (1% THD) on Channels 1-5, 75 W (1% THD) on Remaining Channels|
|Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)||215 W (10% THD)|
|Dynamic Power per Channel (3 Ω, Front)||240 W|
|Dynamic Power per Channel (4 Ω, Front)||210 W|
|Dynamic Power per Channel (8 Ω, Front)||120 W|
|THD||0.08% (20 Hz - 20 kHz, half power)|
|Input Sensitivity and Impedance (Line)||200 mV/47 kΩ (Line)|
|Input Sensitivity and Impedance (Phono MM)||3.5 mV/47 kΩ|
|Maximum Preout Level and Impedance||5.2 VRMS, 7.1 VRMS|
|Rated Headphone Jack Output Level and Impedance||32 Ω - 600 Ω|
|Rated Headphone Power Output||80 mW (32 Ω, 1 kHz, 10% THD)|
|Phono Overload||70 mV (MM, 1 kHz 0.5%)|
|S/N Ratio (Line, IHF-A)||110 dB||106 dB|
|S/N Ratio (Phono MM, IHF-A)||80 dB|
|Frequency Response (Analog In)||20 Hz - 30 kHz +/-0.2 dB||5 Hz - 100 kHz/+1 dB, -3 dB (Direct)|
|DSD Sampling Rates via HDMI||2.8 MHz|
|DSD Sampling Rates via USB||2.8 MHz, 5.6 MHz|
|Video Input Sensitivity/Output Level and Impedance||1 Vp-p/75 Ω (Component Y)|
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR)
1 Vp-p/75 Ω (Composite)
|Wi-Fi Standard||IEEE 802.11 a/b/g/n|
|Wi-Fi Terminal Frequency||5 GHz, 2.4 GHz|
|Bluetooth Version||4․1 + LE|
|Bluetooth Frequency||2.4 GHz|
|USB Terminal||Ver. 2.0, 5 V, 1 A|
|FM Frequency||87.5 MHz - 107.9 MHz|
|FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)||Mono: 1.56 µV (15.0 dBf)|
|AM Frequency||530 kHz - 1710 kHz|
* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted